displayit E20I Manuel utilisateur
1. Straighten and assemble all
bungeed poles.
2. Assemble the frame by aligning
the stickers as seen in the frame
diagram.
4. Attach the feet to the frame.
3. Pull pillowcase graphic over frame
and zip bottom closed.
123456 78 910
18
2324
25
26
27
28
37
36
35
34
33
32
31
30
29
42
41
40
39
38
22 19
21 20
14
1516
17
13
12
11
Frame Diagram
20’ Ensemble Tension Fabric Trade Show Display Kit E20I
Assembly Instructions
20’ Flat Helium
by Ensemble
1. Matching the numbered stickers,
assemble the frame as seen in Diagram A.
2. Attach monitor bracket plate on the
horizontal support bars using four bolts,
spacers, and washers.
6. Hang the monitor in place via the
vertical bar hooks and tighten the safety
screws on the bottom.
Diagram A
Ensemble 40” Accessory Panel with Monitor Mount
Assembly Instructions
4. Attach arch frame to any 91” tall
at-top Ensemble frame using two clips.
3. Pull the fabric graphic over the frame
and zip up the bottom. Attach Feet to the
bottom of the frame.
5. Attach the monitor bracket vertical
bars to the back of the frame with the
correct screw size for your monitor.
Tilt
Knob
Hook
Top
Safety
Screw
Compatible with monitors
up to 43” and 25 lbs.
lbs
Autres manuels displayit Moniteur
displayit
displayit GRAFFITY:PLUS Manuel utilisateur
displayit
displayit Graffiti:Plus Wall - Kit A Manuel utilisateur
displayit
displayit 1010D-01 Manuel utilisateur
displayit
displayit 1010E-01 Manuel utilisateur
displayit
displayit E20K Manuel utilisateur
displayit
displayit 1020F-01 Manuel utilisateur
displayit
displayit E10H Manuel utilisateur
displayit
displayit Graffiti Plus Manuel utilisateur
displayit
displayit Graffiti Plus Manuel utilisateur
displayit
displayit 1020A-02 Manuel utilisateur
