Displax Oqtopus Manuel utilisateur

TECHNOLOGY FOR THE MULTITOUCH GENERATION

DISPLAX OQTOPUS

USER GUIDE

MKT.183.5 | DISPLAXTM OQTOPUS USER GUIDE 2

PACKING LIST........................................................................................................................3

GENERAL INFORMATION.................................................................................................4

HANDLING INSTRUCTIONS ...................................................................................................................4

TOOLS REQUIRED.....................................................................................................................................4

DOWNLOAD USER GUIDE AND DRIVERS.......................................................................................4

OTHER INFORMATION.............................................................................................................................5

PRODUCT DESCRIPTION.................................................................................................6

LEG ASSEMBLING...............................................................................................................8

CONTROLLER LCD AND PC INSTALLATION........................................................11

SEPARATE THE METALLIC GRID AND THE GLASS FROM THE TABLE ...........................11

PREPARE THE CABLES.........................................................................................................................11

INSTALL THE PCB CONTROLLER.....................................................................................................11

INSTALL THE PC.......................................................................................................................................12

INSTALL THE LCD....................................................................................................................................12

USING NON EUROPLUG POWER SOCKETS................................................................................13

ATTACH THE GLASS AND METALLIC GRID BACK TO THE TABLE....................................13

INSTALL SOFTWARE ON THE PC.....................................................................................................13

SETTING UP DISPLAX OQTOPUS..............................................................................14

SKIN MULTITOUCH CONFIGURATION....................................................................15

DISASSEMBLE OQTOPUS.............................................................................................16

DISASSEMBLE THE LEGS WITHOUT OPENING THE TABLE..................................................16

DETACH THE PCB CONTROLLER.....................................................................................................16

DETACH THE GLASS TO ACCESS THE LCD OR CABLES......................................................16

CARE & HANDLING..........................................................................................................17

SUPPORT..............................................................................................................................18

MKT.183.5 | DISPLAXTM OQTOPUS USER GUIDE 3

PACKING LIST

Oqtopus shipment contains the following equipments/components:

Table 1 unit

Legs 4 units

Cube 1 unit

Keys 2 sets (4 units)

Screws legs 16 units

Washers 32 units

Screws cube 4 units

Metallic bracket 1 unit

Spare cable clips

PCB controller 1 unit

USB cable 1 unit

PC 1 unit

LCD + remote control 1 unit

This shipment contains the following document:

Packing List

MKT.183.5 | DISPLAXTM OQTOPUS USER GUIDE 4

GENERAL INFORMATION

HANDLING INSTRUCTIONS

DISPLAX Oqtopus has two main components, the leg structure and the table.

When moving the table, always hold it by the bottom (white structure) and never by the glass.

, a strong material. The top is made of glass, has a

metallic grid attached and a DISPLAX Skin Multitouch laminated on the inside. The top piece

must be handled with extreme care to avoid damaging Skin Multitouch.

TOOLS REQUIRED

To assemble DISPLAX Oqtopus, besides what your received from DISPLAX Interactive

Systems, you will need:

Unbrako / hex key (not included), sizes 3, 4 and 5

DOWNLOAD USER GUIDE AND DRIVERS

USER GUIDE

Make sure you download and read the DISPLAX Oqtopus User Guide before assembling

your unit:

http://www.displax.com/downloads/UserGuides/DisplaxOqtopus.php

MKT.183.5 | DISPLAXTM OQTOPUS USER GUIDE 5

DRIVER

DISPLAX Oqtopus uses DISPLAX Skin Multitouch as touch technology. To download the

most updated drivers please use the following link:

64 bits DRIVER

http://www.displax.com/downloads/drivers/Setup_x64.exe

32 bits DRIVER

http://www.displax.com/downloads/drivers/Setup_x32.exe

If you are not using the default PC unit make sure to check the architecture of the processor

and select the correct driver.

SKIN MULTITOUCH USER GUIDE

DISPLAX Oqtopus uses Skin Multitouch for touch detection The User Guide can be

downloaded to answer any questions regarding the touch technology.

http://www.displax.com/downloads/UserGuides/DisplaxSkinMultitouch.php

OTHER INFORMATION

The serial number is placed underneath the table, at the center.

MKT.183.5 | DISPLAXTM OQTOPUS USER GUIDE 6

PRODUCT DESCRIPTION

A. Table (white corian)

a. Power cable with male connecter and a triple plug

B. Glass (with DISPLAX Skin Multitouch and metallic grid)

C. White iron base

D. Cube

E. Legs

a. One of the legs has an electric cable with a female connector

F. Screws for the leg (16)

G. Screws for the cube (4)

H. Screws for the table (10) (they attach the metallic grid to the corian tray)

I. Screws (4) for the iron base (D)

J. Screws for the LCD (4) (they come attaching the LCD to corian tray)

K. PCB Controller

a. USB cable type A to mini

L. PC

a. Power cable

b. USB cable

M. LCD

a. Power cable

b. Remote control

N. HDMI Cable

O. Velcro strap

P. Cable clips

Q. Keys

R. Bracket

S. Washer (32)

MKT.183.5 | DISPLAXTM OQTOPUS USER GUIDE 7

MKT.183.5 | DISPLAXTM OQTOPUS USER GUIDE 8

LEG ASSEMBLING

You will need the following components:

C; D; E; F; H; R; S

You will also need an unbrako / hex key, not included.

Make sure that D has the inside holes facing up.

Use two S per F.

Ea should be the last leg to be assembled.

Attach Ea to the face of D with a cut out in the hole and use that cut out for the cable.

When attaching Ea, use R to hold the cable facing up.

Push the female connector from Ea up through D.

Unscrew C from A. Attach C to D using I. Make sure you pull the electric cable through C

before.

The longer edge of C must be aligned

below.

MKT.183.5 | DISPLAXTM OQTOPUS USER GUIDE 9

Shake the leg structure to check if it is stable and well assembled.

Attach A back to C making sure you align the USB door of A with the hole in C. This task is

better performed using 3 persons. While two hold A, a third one connects Ea to Aa. Then A

should be placed over C and screwed.

MKT.183.5 | DISPLAXTM OQTOPUS USER GUIDE 10

Every time you need to move DISPLAX Oqtopus from one place to another make sure to

always hold it by the white corian tray and never by the glass.

Table des matières

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

Acnodes

Acnodes PC 1150 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-521 Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

Advantech

Advantech TPC-30 Series Manuel utilisateur