Diono Monterey2 Manuel utilisateur
Instruction Manual
UK
2
Product: Monterey2 child booster seat
Model: 15000
Mfg. by: DIONO
Unit D Ventura House
Ventura Park Road
Tamworth Stas B78 3LZ UK
CUSTOMER SERVICE
Tel: 0845.300.9071
Email: dionoUK@diono.com
www.diono.com
3
Contents
Page
4Warnings
6Safety Information
7Cup Holders
ASSEMBLY AND ADJUSTMENT
8 Assembly Illustration
9 Attaching and Removing the Backrest
9 Headrest Adjustment
9 Backrest Width Adjustment
BOOSTER SEAT USE
10 ISOFAST Installation
11 Proper Positioning on Vehicle Seat
11 Adjusting Recline Angle
12 Securing the Child
13 Proper Buckle Position
14 CARE AND MAINTENANCE
15 WARRANTY
4
•Read this manual carefully and follow all instructions correctly.
If booster seat is not correctly tted in the vehicle and if the
child is not properly secured by the vehicle seat belt system,
the child and other passengers are at serious risk of injury
should an accident occur.
•BEFORE installing this booster seat, read all sections of this
manual thoroughly and familiarise yourself with all the booster
seat components. (see page 8)
•Diono advises that any child seat not be purchased
secondhand. Please safely dispose of, or recycle, your child seat.
Do NOT sell it or pass it on.
•Remember: No child safety seat is ‘escape proof’.
•Vehicle seat belt systems cannot be designed as ‘child proof’
and still legally comply with the requirements of European
Standard ECE R44.
•This booster seat is approved according the most recent
European testing standards and is suitable for forward facing
children only, between 15 kg and 36 kg (approx. age 3 – 12
years and up to a maximum height of 160 cm)
•This booster seat may be used in either the front or rear seat.
However, Diono strongly recommends installation in the
middle position of the rear seat, provided it is equipped with a
3-point seat belt.
WARNING !
Death or SERIOUS INJURY can occur.
5
•DO NOT use booster seat on a vehicle seat equipped with an
active front air bag. This could result in serious injury or death.
•DO NOT use this booster seat on a vehicle seat that is side-
facing or rear-facing.
•DO NOT place anything under this booster seat (such as a
cushion or towel) to raise it up o the vehicle seat.
•DO NOT dismantle or in anyway modify any part of this
booster seat. This can impact performance and cause injury to
a child.
•DO NOT leave objects such as luggage cases, groceries, books
or toys loose in the vehicle. They must be secured properly.
•DO NOT leave folding vehicle seats unlocked. Sudden stopping
with an unlocked vehicle seat could injure a child.
•DO NOT ever leave any child unattended in a vehicle in this
booster seat, or any other child restraint.
•DO NOT use booster seat after it has been involved in an
accident. Unseen damage may have occurred which could
impair its ability to adequately protect a child.
•DO NOT use booster seat without the original fabric cover or a
replacement cover made by Diono. The cover is integral to the
safety and performance of the booster seat.
•DO NOT let a child play with this child seat. It is not a toy.
WARNING !
Death or SERIOUS INJURY can occur.
6
Safety Information
•A LWAYS cover booster seat if vehicle is left in direct sunlight.
Fittings can become hot and cover fabric can become faded.
•A LWAYS keep this user guide in storage slot (in the underside
of this child seat) for future reference.
•A LWAYS make sure that this booster seat does not become
trapped in the door of the vehicle or within a folding vehicle
passenger seat.
•A LWAYS store this booster seat in a safe place when not
in use. Do not store near direct heat source or place heavy
objects on top of it.
•A LWAYS secure this booster seat in the vehicle even when
unoccupied.
•IMPORTANT: This booster seat must ONLY
be used with a 3-point seat belt: vehicle seat
belt with a lap belt and diagonal shoulder
belt approved to UN/ECE Regulation 16 or
equivalent standard (Fig. 1A) and only with
approved vehicle anchorage locations as
specied by the vehicle manufacturer.
•IMPORTANT: Before installation, always
make sure vehicle seat is locked in its upright
position. Reclining the vehicle seat will
adversely aect the safety and performance
of the child seat in an accident.
•IMPORTANT: While every care has been taken to design
this child safety seat with smooth and rounded contacting
surfaces, Diono is not responsible for any damage occurring to
vehicle seats or seat belts.
Fig. 1A
7
CUP HOLDERS
Cup holders are located on both sides
of seat bottom: swivel outward to the
locked position for use. Swivel inward
to the recessed and locked position
when not in use.
IMPORTANT: Do not step on or put
excess weight on cup holder which could cause it to break.
CAUTION: DO NOT use with hot liquids as this could burn a child.
8
Assembly Illustration
Head
support
adjuster Upper
belt
guide
ISOFASTTM
adjuster
straps
Adjuster for
seat back
width
ISOFASTTM
connectors
Cup
holder
Lower
belt guide
9
Assembly and Adjustments
ATTACHING THE BACKREST
1Lay backrest on at surface
with front facing down.
2Slide seat bottom at 90o
angle onto backrest hooks.
3Rotate seat bottom downwards and under back rest until a
‘click’ is heard and the seat shape is formed.
4Fasten screws tightly for permanent
attachment.
REMOVING THE BACKREST
Follow above instructions in reverse.
ADJUSTING THE HEADREST
Squeeze the red adjuster on back of
booster seat head rest while adjusting its
height up or down to t the child.
Suggestion: It may be easier to adjust backrest to proper width prior to
securing the booster seat installation using ISOFAST.
ADJUSTING BACKREST WIDTH
This booster seat features a unique,
width-adjusting seat back to best t
a growing child as well as seasonal
clothing. Turn the dial on the back of
the backrest 1to adjust its width:
turn clockwise to increase backrest
width, turn counter-clockwise to make
backrest narrower.
10
ISOFAST Installation
WARNING: Unsecured objects can become ying
hazards and can cause serious injury in an accident.
Diono always recommends utilizing ISOFAST
installation in vehicles equipped with lower anchors.
To improve safety and performance, this booster seat is
equipped with an easy ISOFAST system that allows easy
attachment to a vehicle’s lower anchor locations.
Disengage ISOFAST anchors from storage position.
Lay booster seat on its side.
1While depressing the cam lock lever,
2Pull ISOFAST connectors away from
the booster seat and extend both
straps all the way.
3Connect both ISOFAST connectors to the vehicle anchors
for that seating position, starting with
the connector that is farthest from you.
For ease of use, make sure open end of
hooks face upwards during use.
4While pushing booster against
vehicle seat,
5pull one adjuster strap tight and
then the other.
NOTE: Even with ISOFAST prop-
erly attached and adjusted, child
seat will still have movement
against the vehicle seat back
and bottom.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Diono siège auto
Diono
Diono Cambria Manuel utilisateur
Diono
Diono monterey XT LATCH Manuel utilisateur
Diono
Diono camaria Manuel utilisateur
Diono
Diono Radian 3QX Manuel d'utilisation et d'entretien
Diono
Diono Cambria Manuel utilisateur
Diono
Diono Radian 3QXT+ Manuel d'utilisation et d'entretien
Diono
Diono Radian 5 Manuel utilisateur
Diono
Diono Rainier Manuel utilisateur
Diono
Diono Everett NXT Manuel utilisateur
Diono
Diono Radian R120 Manuel utilisateur
Diono
Diono Monterey Manuel utilisateur
Diono
Diono solana 2 Manuel utilisateur
Diono
Diono Cambria 2 Manuel utilisateur
Diono
Diono Radian 3R SafePlus Series Manuel utilisateur
Diono
Diono Radian 3QX Manuel utilisateur
Diono
Diono everett NXT fix Manuel utilisateur
Diono
Diono Radian 5 Instructions de montage
Diono
Diono Monterey 4 DXT Manuel utilisateur
Diono
Diono Radian 5 Manuel utilisateur
Diono
Diono Everett NXT Manuel utilisateur
