User Manual
LVT Series
Low Voltage Landscape Transformers
Important: Read all instructions prior to installation.
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 diodedrive.com
Rev Date: V2 06/15/2020
Optional Timer Operation (150–600 W models)
Mechanical Timer (BND-60/U92)
With all grey tabs set at the pushed-in position, timer will not aect function
and connected lights will stay on unless power is switched o.
To set up the timer, begin by making sure the sliding switch on top is set to the
timer setting. Next, rotate the timer dial until the arrow points to the current time
(1 PM in our example). Finally, pull grey tabs outward at times when the light
system should be powered o (7 PM to 12 AM in our example). Times where
the grey tabs are pushed in (dark grey in the image) will be the only times the
system will be switched on.
Additionally, the system can be manually turned o using the main power switch,
or manually turned to always on with the slide switch on top of the timer.
Digital Timer (BND-60/SU92)
Before beginning to adjust settings, plug the timer in and press the reset button to ensure
the timer is at factory default settings before use. Timer will return to main menu if no input
is made for one minute at any time during programming or if the MENU button is held down
for 2 or more seconds.
Setting Date/Time
1. With supply power on, press the MENU button once. CLOCK should be illuminated
in the top right corner of the screen.
2. Next, press the OK button to enter day of the week selection. Use the +/- buttons
to select the correct date. Press OK to conrm selection.
3. The hour should now be ashing. Use the +/- buttons to adjust to the correct hour
(cycle through to go from AM to PM). Press OK to conrm, then repeat for minutes.
Setting Programs
Timer can store information for up to 9 programs, with independent ON and OFF settings for each program.
1. With supply power on, press the MENU key until you reach the desired ON or OFF setting. Each pair of
ON and OFF settings (e.g. 1ON and 1OFF) will need to be set to work together for proper operation.
2. Press the OK button to enter programming for the selected setting.
3. Use the +/- buttons to cycle though day settings and press OK when the desired setting is displayed.
Day Settings:
MO, TU, WE, TH, FR, SA, and SU (full week)
MO, TU, WE, TH, FR, SA, or SU (individual days)
MO, TU, WE, TH, and FR (weekdays only)
SA and SU (weekend only)
4. Select the hour (cycle through to go from AM to PM) using the +/- buttons, then press OK.
5. Select the minute using the +/- buttons, then press OK to nish programming the setting.
6. Press the MANUAL button so that AUTO is displayed on the screen to activate the programmed settings.
Operating Modes
Press the MANUAL button to cycle between operating modes.
OFF - Lights will remain o and set programs will not be activated.
ON - Lights will remain on constantly and set programs will not be activated.
AUTO/ON - Lights are currently on and set programs will be activated.
AUTO/OFF - Lights are currently o and set programs will be activated.
2
3
4
5
6A
7
9
8
10
11
12
1
2
3
5
4
6P
8
9
10
11
12
1
7
MO TU WE TH FR SA SU
AM
PM
M
E
N
U
M
A
N
U
A
L
C
O
U
N
T
D
O
W
N
O
K
