7
AF03GT
Optimized layout for A4 print.
TECH_MAN_SETUP_ENG_AF03GT_v7
Remote scale 12
Analog Digital RCD
Digital RCPTD
...
A 1 1
2
3
5
7
4
6
Number of scales
Load cells type
Number of channels (Scale 1)
Number of cells (Scale 1)
Load cells distribution
Number of DGX
Number of cells (DGX1) Number of cells (DGX24)
Number of channels (Scale 2)
Number of cells (Scale 2)
Selection of the number of connected weighbridges; by “remote scale” we mean a remote weighing system connected via
serial / Ethernet, the weight of which is used as if it were a directly connected load receptor.
Allows you to select analogue cells, digital cells, WWS wheel-weighing platforms or DGX conversion boards.
Allows you to select how many reading channels to use for the connection of each analogue weighbridge.
1 ~4 (1).
1 ~16 (1) for digital cells.
One weighbridge
1 ~24 (1) for analogue cells connected to DGX.
Only visible if "Type of load cell = Digital".
For digital cells: for programming the number of digital cells used for each weighbridge.
For DGX digital junction boards: for programming the total number of analogue cells connected to the DGX boards used.
Only if "Load cells type = Digital" e "Number of scales = 2".
Like “Number of cells (Scale 1)”; the maximum number of cells which can be configured for “Scale 2” depends
on that set for “Scale 1”.
Weighbridge with three DGX:
DGX1 - 4 analogue cells;
DGX2 - 2 analogue cells;
DGX3 - 4 analogue cells.
Weighbridge with three DGX:
DGX1 - 4 analogue cells;
DGX2 - 4 analogue cells;
DGX3 - 2 analogue cells.
Weighbridge with five DGX:
DGX1 - 2 analogue cells;
DGX2 - 2 analogue cells;
DGX3 - 2 analogue cells;
DGX4 - 2 analogue cells;
DGX5 - 2 analogue cells.
1 13 32 2 1 2 3 4 5
Total 16 cells.
Only visible if "Type of load cell = DGX".
Indicates the total number of DGX boards and the division of the load cells for each DGX board.
Indicates the total number of DGX boards used to implement the weighbridges.
(In example 1 and 2, the total DGX is 3, in example 3 the total DGX is 5).
Indicates the number of analogue cells connected to the DGX board.
Calibration | Scale selection
1 ~15 (1) for digital cells.
1 ~23 (1) for analogue cells connected to DGX.
Example
Example 1 Example 2 Example 3
Weighbridge 1 (8 celle) Weighbridge 2 (8 celle)
1 ~24 (1).
1 ~4 (1).
The number of cells for each DGX depends on the number of DGX boards.
i
DGX is a board which converts up to four analogue cells into digital.
WWS is a digital wheel-weighing platform.
i
Digital ZSFD
Digital CB50X-DL
Digital WWS
Digital SP/CS
Digital DGX
Digital RL5426/5416
Digital RC3D Digital C16i
