Dimplex XLE Series Manuel utilisateur

Quick Start Guide 13409-1

This guide is for quick reference only.

Please refer to the operating instructions for further information.

• The outer case of the XLE heater will be cooler to touch than a conventional storage heater. This is because less

heat is ‘lost’ through the case, making more heat available from the fan outlet when needed.

• Nothing may be placed in the 30cm (1 foot) in front of the heater at any time. This is to avoid items coming into

contact with the grilles and the heated air which leaves it. Blocking some or all of this area could represent a ﬁre

hazard.

• You do not need to decide how much heat to store. Simply set the timer mode and the temperature to what suits you

and leave the heater to meet your requirements.

• Ensure that both supply switches next to the heater are turned on. During the summer when no heat is required, both

wall switches can be turned off. Remember to turn both of these back on inAutumn when heat is required again.

The heater control allows you to choose when you want the heating to be on, and at what temperature. To deliver the

required heat the control switches on and off a low speed fan that pushes stored heat from the core into the room.

The periods during which the heater is providing heat are called ‘Comfort On’ (shown at the bottom of the screen).

Outside of these periods the heater will not deliver heat and these periods are called ‘Comfort Off’. During the

‘Comfort On’ periods the low speed fan will run to maintain the temperature on the screen. During the ‘Comfort Off’

periods it will not.

Note: there is a delay of up to a minute on the fan operation when switching to ‘Comfort On’ or ‘Comfort off’.

This is normal and does not represent a fault.

How does the heater control work?

Set the temperature

The temperature shown on the display is the room temperature

setpoint. This is the temperature that the heater will maintain during

the ‘Comfort On’ periods. If the room temperature is above this

temperature then the fan will not operate.

The heater leaves the factory with this temperature set at 21°C

which represents a typical, comfortable room temperature.

If you require a different room temperature use the Up and Down

buttons until the display shows the temperature you require.

YOU DO NOT NEED TO TURN THE TEMPERATURE DOWN OVERNIGHT.

Set the time

The time and date are set in the factory and should not need to be amended, however to check that they are correct

press Menu, then press the Enter button with Time / Date highlighted. Use the Up and Down buttons until the correct

value is shown, then press Enter button to conﬁrm and move on to the next value. Repeat until all details are correct

and the main menu screen is showing again, then press Back.

The time is automatically adjusted in Spring and Autumn at the changes between Greenwich Mean Time (GMT) and

British Summer Time (BST).

It is recommended to check the time every couple of months and adjust if necessary.

XLE Series Heater

21°C

Comfort On

Advance

Sometimes you may need to change the way you

use your heating temporarily. This is achieved

by using the Advance function. The Advance

function allows you to begin the next ‘Comfort’

mode early.

If the heater is in ‘Comfort Off’ mode and you

want heat – press the Advance button. If the

heater is in ‘Comfort On’ mode and you don’t want heat, press the Advance button. The heater’s change mode will

go off until the beginning of the next ‘Comfort’ period, then go back to the timed heating periods.

Dimplex UK, a division of GDC Group, Millbrook House, Hedge End, Southampton, SO30 2DF

For further assistance please contact Dimplex Customer Services on 0844 879 3588 or go to www.dimplex.co.uk

Boost

A supplemental boost element controlled by the electronic thermostat is provided if additional room heating is

required, for example, due to unusually cold weather. You can select how long the boost will run for, from one to four

hours. Once the boost has run for the selected time it will automatically switch off.

Main Menu

Date / Time

Timer Mode

Boost

Options





21°C

Comfort On

Boost Menu

No Boost

1 Hour

2 Hours

3 Hours

4 Hours

Auto Boost

Auto Boost will automatically use the boost element to maintain the set temperature during ‘Comfort On’ periods.

Note: Boost element uses peak rate electricity and could lead to increased running costs.

Use Up and Down buttons to highlight

Boost and press Enter to select.

Use Up and Down buttons to highlight

duration required and press Enter 

Press Menu

Which timer mode is best for me?

The heater leaves the factory set in Out All Day

mode. If you are out during the day and only

require heat in the mornings and evenings then

this mode will suit your lifestyle and you won’t

need to do anything. If you are in during the day

then you should select the Home All Day mode.

This mode will give you four periods of heating

split throughout the day.

If you are away for an extended period then you

can use the Holiday mode. This allows you to

reduce the heating during the period that you are

away, reverting to the previously selected mode

on the day you return.

Please refer to the operating instructions for

information on how to modify the programmed

times.





Press Menu





Use Up and Down buttons to

highlight Timer Mode required

and press Enter 





Use Up and Down buttons to

highlight ‘Select’ and press Enter 

Set the timer mode

Your XLE heater comes

pre-programmed with three

timer modes.

These modes deﬁne the

periods when the heater

will operate in ‘Comfort

On’ mode.

Timer Mode Description

Out All Day 7.5 hours heating per day in two periods

Home All Day 11 hours heating per day in four periods

Holiday Set the temperature and number of days for which you are on

holiday

The three modes are:



21°C

Comfort On

Main Menu

Date / Time

Timer Mode

Boost

Options

Timer Mode

Select

Preview

Modify

Timer Mode

Out All Day

Home All Day

Holiday

Press Advance

21°C

Comfort Off

Advance

21°C

Comfort On

Use Up and Down buttons 

to highlight Timer Mode and

press Enter 

Autres manuels pour XLE Series

Autres manuels Dimplex Chauffage

Dimplex

Dimplex CUH05B31T Manuel utilisateur

Dimplex

Dimplex DuoHeat Duo300i Manuel utilisateur

Dimplex

Dimplex LS 200 Manuel utilisateur

Dimplex

Dimplex Duo300i Manuel utilisateur

Dimplex

Dimplex XMCS712N Manuel utilisateur

Dimplex

Dimplex CAB10A Manuel utilisateur

Dimplex

Dimplex BFH24R Manuel utilisateur

Dimplex

Dimplex FPE 050E Manuel utilisateur

Dimplex

Dimplex CKHA Series Guide de configuration

Dimplex

Dimplex PLX050E Manuel utilisateur

Dimplex

Dimplex LPC Series Manuel utilisateur

Dimplex

Dimplex FutuRad FutM2TSTi Manuel utilisateur

Dimplex

Dimplex Desk Friend DDF250 Manuel utilisateur

Dimplex

Dimplex ML Series Manuel utilisateur

Dimplex

Dimplex XHD23L-AU-RL Manuel utilisateur

Dimplex

Dimplex MFP 051E Manuel utilisateur

Dimplex

Dimplex QUBEFAN Q2BT Manuel utilisateur

Dimplex

Dimplex Q-Rad Series Manuel utilisateur

Dimplex

Dimplex DuoHeat Duo300i Manuel utilisateur

Dimplex

Dimplex LCM Series Manuel utilisateur

Dimplex

Dimplex EPX Manuel utilisateur

Dimplex

Dimplex TDTR 175 W Manuel utilisateur

Dimplex

Dimplex DHCH20E Manuel utilisateur

Dimplex

Dimplex DXLWP800TI B Manuel utilisateur

Manuels Chauffage populaires d'autres marques

oventrop

oventrop Regucor Series Manuel utilisateur

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuel utilisateur

ELMEKO

ELMEKO ML 150 Manuel utilisateur

BN Thermic

BN Thermic 830T Manuel utilisateur

KING

KING K Series Mode d’emploi

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guide de démarrage rapide

Well Straler

Well Straler RC-16B Manuel utilisateur

EUROM

EUROM 333299 Manuel utilisateur

Heylo

Heylo K 170 Manuel utilisateur

Eterna

Eterna TR70W Manuel utilisateur

Clarke

Clarke GRH15 Mode d’emploi

IRSAP

IRSAP The Radiator Company Ovali Manuel utilisateur

Empire Heating Systems

Empire Heating Systems WCC65 Manuel utilisateur

Wetekom

Wetekom 92 86 43 Manuel utilisateur

Desa

Desa SPC170-F Manuel utilisateur

Watlow

Watlow Watrod Electric Tubular Heaters Manuel utilisateur

Haverland

Haverland ECO-DRY GPS Series Manuel de la liste des pièces

Stelpro

Stelpro ASILVC2060 Series Manuel utilisateur