DIGIVOX DVM-2032 Manuel utilisateur
2
Features χχχχχχχχχχχχχχχχχχχχχχ
3
Locations of Function and Control Button χχχχ
5
LCD Description χχχχχχχχχχχχχχχχχχ
6
Battery Installation χχχχχχχχχχχχχχχχχ
7
Battery Life Time χχχχχχχχχχχχχχχχχ
7
Power On & Off χχχχχχχχχχχχχχχχχχ
8
Recording χχχχχχχχχχχχχχχχχχχχχ
9
Playback χχχχχχχχχχχχχχχχχχχχχ
11
Erasing χχχχχχχχχχχχχχχχχχχχχχ
14
Adjusting Volumeχχχχχχχχχχχχχχχχχ
15
Hold Function χχχχχχχχχχχχχχχχχχ
15
Setting the VOS Mode χχχχχχχχχχχχχχ
16
Setting Mic Sensitivity χχχχχχχχχχχχχχ
16
Repeating the Playback χχχχχχχχχχχχχ
17
Setting Beep On/Off Function χχχχχχχχχχχ
17
Setting Preengaged Recording χχχχχχχχχχ
18
Setting Alarm Function χχχχχχχχχχχχχχχ
19
Connecting External Equipments (Optional)
χχχχχ
20
Phone Recording (Optional) χχχχχχχχχχχχ
22
Using MP3 Player χχχχχχχχχχχχχχχχχ
24
Installation Of Manager Program χχχχχχχχχ
27
Using Manager Program χχχχχχχχχχχχχχ
32
Troubleshooting χχχχχχχχχχχχχχχχχχ
36
Cautions χχχχχχχχχχχχχχχχχχχχχχ
37
Specificationsχχχχχχχχχχχχχχχχχχχχ
39
FCC Note χχχχχχχχχχχχχχχχχχχχχχ
40
Guaranteeχχχχχχχχχχχχχχχχχχχχχχ
42
1
Contents Contents
43
Preengaged Recording
Enables to record at any time when you want.
Alarm Sound Function
You can hear the alarm sound at any time when you want.
Recording up to 3 groups
Enables to record 99 messages into each group.
Automatic Power Off
The unit will be automatically turned off when not in use.
Indication of the remaining recording time
You can check the available remaining recording time.
Adjustable repeating time
Enables to repeatedly listen to the part you want by
adjusting the time.
Monitoring of recording
Available to listen to the message by using the stereo
earphone during the recording .
External jack for Input/Output
Enables to record between the unit and other equipments.
Indication of the recording/playback level
Enables to check the level when recording/playback.
VOS recording
Available only when any voice and sound exist.
Scan Function
Enables to playback just the fore part of each
message.
Pause Function
Enables to pause during recording.
USB PC Interface
Lets you use the recorder with a PC with fast USB
port for voice & data file.
MP3 File Playback
It can be used to play and store digital music file.
Features Features
65
Locations of Function and Control Buttons
Top
HAND STRAP HOLE
FF
PLAY/STOP
REWIND
VOLUME
(+, -)
USB PORT
BUILT-IN MIC
MICROPHONE
JACK
HOLD
ERASE
EARPHONE
JACK
LCD DISPLAY
REC/STOP SPEAKER
MODE/
PAUSE
FOLD/
REPEAT
Front Back Right Side
Left Side
LCD Description
Folder
Lock Folder
Hold
Remaining Battery
Capacity
One Folder Repeat
VOS
Message Number
Preengaged Record
Recording Mode
Section Repeat
All Folders Repeat
Amount of Recorded
Time and Recording
Time Left
Alarm
MIC Sensitivity
Operation Graphic
87
Be sure to replace batteries at stop mode.
1. Open the battery cover.
Press and slide the battery cover off.
2. Install two(2) AAA size batteries and slide
the cover back into place.
Battery should be LR03 or equivalent
(AAA Size or UM-4)
3. Press PLAY/STOP( / ) button or
REC/STOP button to check
the battery condition.
Recorded messages will not be erased
when replacing batteries.
1) Set the HOLD switch to "Off" mode and
press the REC/STOP button for about
one second.
Then, LCD is displayed, which means
power on.
2) Automatic power off : the unit will be
automatically turned off within one minute
when not in use without pressing any button.
Recording Mode About 10 Hours
Speaker playback About 8 Hours(VOL : 10)
Earphone playback About 9 Hours(VOL : 10)
Earphone playback About 7 Hours(VOL : 10)
Voice
MP3
FULL NORMAL
WEAK EXHAUSTED
Battery Installation
Battery Life time
1Power On & Off
109
1) Release the HOLD switch and press the
REC/STOP button for recording.
2) The unit starts recording when the red
LED lights ON.
(The unit displays the recording number, level
and time on the LCD.)
Recording Time Indicaton on the LCD
hour minute second
To record on the following number
during recording
During recording, move the button
upwards and then, you can continue
to record on the following number.
Indication of the remaining
recording time
If you press the FOLD/REPEAT button
during recording, the LCD indicates
the remaining time.
Monitoring of recording
You can listen to the recorded messages
by connecting earphone to EAR jack during
recording.
(During monitoring, the volume level can
not be controlled.)
Using an external pin microphone
(Optional)
Record after connecting an external
microphone to MIC jack located on the left side
of unit.
3) To stop recording, press the REC/STOP
button again.
Pause function
Press the MODE/PAUSE button
during recording.
The "PAUSE" letter blinks in LCD display,
which means pause function is operated.
To release the pause function, press
the MODE/PAUSE button one more time.
2Recording
1211
1) Release the HOLD button and select your
desired message number by moving
upward( ) or downward( )
the button.
2) If you press the / button to vertical
direction, the LED lights in Green color to
playback the recorded message.
3) During playback, you can stop the playback
by pressing the / button to vertical direction
one more time.
(Resume Play)
If you re-play just after pressing stop button,
playback will be proceeded continuously
from the pre-stopped time.
(If another button except for the / button
is pressed at stop mode, the fore part
of the last recording message will be played.)
Fast-forwarding( ) and
rewinding( ) during playback
You can adjust the playback time by
moving the or button upward
or downward long enough during
playback.
If you wheel the or button
shortly, you can hear the following
recorded message or previous
recorded message.
Converting message during playback
You can adjust by wheeling the button
/ upward or downward.
Scanning
At stop mode, press the / button for
more than 2 seconds.
Then, "SCAN" will be displayed and the unit
will playback each message for about 5 seconds
in sequence from the first message
to the last message.
After playback of all messages in one folder,
the unit stops to playback and if you press
the / button, the unit stops operation.
3Playback
1413
1) Erasing one message
Select the recorded number you want
to erase.
Press the ERASE button.
The number of recorded message will
blink and the recorded message is
heard for 3 seconds.
Press the ERASE button again.
To cancel the erasing, press any button
except for the ERASE button.
2) Erasing all recorded messages
in one folder
Select the folder which you want to
erase at stop mode.
Press the ERASE button for about
5 seconds.
(At that time, and the related folder
icon will blink.)
Press the ERASE button again for
about a second and then,
all recorded messages are erased.
To cancel the erasing, press any button
except for the ERASE button.
Repeating the section playback
During playback, press the FOLD/REPEAT
button which means the repeat function
is being started.
Then, if press the FOLD/REPEAT button
again after a certain time, the repeat
function is completed Which means
the repeating time is set-up and the unit
will continue to repeat in the selected section.
Indication of the remaining
playback time
If you press the FOLD/REPEAT button one
time during playback, the LCD indicates the
remaining time.
4Erasing
1615
1) If the HOLD switch is set upwards, any
button is not operated.
2) If the HOLD switch is set upwards, the key
icon is displayed on LCD, which means
Hold function is set.
3) To release the hold function, move the
HOLD switch downwards.
When you set the HOLD switch at stop
mode,the recorder will be automatically
turn off.
1) Press the MODE/PAUSE button 2 times
and then, LCD displays "MIC" letter.
2) At that time, select "HI" or "LO" mode by the
Volume button and press the FOLD/REPEAT
button.
3) After finishing the selection, the LCD displays
the selected "HI" or "LO".
6Hold Function
7Setting the Record mode
8Setting the VOS mode
1) Press the MODE/PAUSE button 1 time and
then, LCD displays “VOS” letter.
2) At that time, select “on” mode by the Volume
button and press the FOLD/REPEAT button.
3) When there is no voice or no sound during
recording after the “VOS” setting, the LCD
displays “SENSE” letter and the unit stop
recording. With voice or sound heard, the
“SENSE” letter disappear and start recording
again.
1) You can adjust Volume level by pressing
VOLUME + / - button.
(But the volume will not be adjusted
during recording.)
5Adjusting Volume
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels DIGIVOX Enregistreur vocal
