Digitus DN-95103-2 Manuel utilisateur
PoE+INJECTOR,
802.3AT, 10/100/1000 Mbps,
30 WATT
Manual
DN-95103-2
DN-95103-2, it is the single-port 30w PoE injector with detection chip inside.
The output voltage is 55VDC/550mA, output power 30W. It fully comply to
IEEE802.3at standard, and only supply power for PoE standard PD such as,
indoor wireless AP, network camera, IP phone…etc.
DN-95103-2 designed for indoor use only, works with input voltage 100VAC～
240VAC. This power supply is connected to other equipment over Cat5/Cat5e,
and the best effective distance is 100 M. It can work to 400meters with PoE
extender. (PoE extender is not included)
1. Power instruction
2. Load activations instruction
3. Data input port
4. PoE power output
5. AC power input
6. Mounting holes
MAIN SPECIFICATION
- Provide power with detection chip
- Output power: 30W
- Output current: 550mA
- Power Pin: 4.5+/7.8-
- Small size, high-power, lower cost
- Support power for IEEE802.3af/IEEE802.3at PD
OUTLINE DRAWING
SPECIFICATIONS
Standards
IEEE802.3 10Base-T Ethernet
IEEE802.3u 100Base-Tx Fast Ethernet
Support 10/100/1000Base-T LAN
Support IEEE802.3af/IEEE802.3at PD
RoHS Compliant
WEEE Compliant, CE/FCC
FCC Part 15,Class B
EN 55022 Class B
MTBF:100,000 h@ 25 ℃
PoE power output
Ethernet Pin Power: 4.5+/7.8-
Data Rate: 10/100/1000Mbps
Output power: 55VDC
Output current: 550mA
Input voltage: 100-240VAC
Input current: 1.0A@100-240VAC
AC Hz: 50-60Hz
Size & Weight
Size: 140mm * 63mm* 32.5mm
Weight: 200g
LED instructions
AC power LED: RED
ACTIVE Load LED: GREEN
Working Environment
Temperature: -5 to 45℃
Height: -304.8 meter to 3048 meters
humidity: Max to 90%, without Coagulation
AC Surge Protection
1.5KA (8/20us)
3KV (1.2/50us)
APPLICATION PICTURE
Package info. DN-95103-2, Power cable * 1, User Manual *1
Note: If wrongly installed or improperly used in the living area, the device can cause
interference in radios and other electronic devices. Appropriate use is when the device, as far
as feasible, is operated with shielded connection cables (with network products in addition to
category 5 shielded cables and higher). The device has been tested and falls within the limits
of class B computing equipment according to the requirements of EN 55022.
Warning: This device conforms with test category B - it can cause radio interference in the
living area; in this case the operator may demand that appropriate measures are implemented
and arise for this reason. Declaration of conformity: The device fulfills the EMV requirements
according to EN 55022 for ITE and EN 55024. Devices with external or integrated power
supply furthermore fulfill the requirements of EN 61000-3-2 and EN 61000-3-3. In this way, the
fundamental protection requirements of the EMV-2004/108/EC guideline are fulfilled. The CE
conformity has been proven. The pertinent declarations are deposited with the manufacturer.
www.assmann.com
ASSMANN Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
Table des matières
Autres manuels Digitus Équipement de laboratoire
Manuels Équipement de laboratoire populaires d'autres marques
Agilent Technologies
Agilent Technologies 5800 ICP-OES Manuel utilisateur
Endress+Hauser
Endress+Hauser Cleanfit CPA875 Manuel utilisateur
NI
NI PXI-5422 Manuel
Collomix
Collomix Aqix Manuel utilisateur
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series Manuel utilisateur
Ocean Insight
Ocean Insight FLAME-NIR+ Manuel utilisateur
