Digitus DA-81003 Manuel utilisateur

2D Barcode Hand Scanner,

Battery-Operated,

Bluetooth & QR-Code Compatible

QIG

DA-81003

Introduction

The Battery-Operated 2D Barcode Scanner from DIGITUS® operates

reliably and economically. Its ergonomic design makes it easy to

handle, an excellent choice for a wide variety of working

environments such as retail, logistics and commerce of all kinds.

With 200 scans per minute, this bidirectional scanner delivers ideal

results. The hand scanner is suitable for one- and two-dimensional

high-resolution codes such as barcodes or QR codes. The scanner is

also able to read QR codes from displays, ideal for scanning QR

codes for mobile payment. Each scanning process is confirmed with

visual and auditory signals and the scanner supports the most

popular code types. Wide scan angles ensure even faster barcode

detection. The scanner is dust-protected and water-resistant,

impacts are absorbed by the silicon cover to protect against damage.

Product Features

•Precise scanning of 1D & 2D barcodes (barcodes / QR codes)

•Supports wireless connection via Bluetooth or cabled via USB

•Anti-interference: External light sources have no influence on

the scan

•Reads barcodes on screens – ideal for payment via

smartphone/QR code

•Automatic mode enables highly efficient operation

•200 scans per minute, bidirectional for reliable detection

•High resolution: Scans high-resolution barcodes

•Dust-protected and water-resistant (IP54)

•Silicon cover absorbs impacts and protects against damage

•Ideal for retail, logistics, and commerce of all kinds

Package Content

•1 x 2D Barcode Hand Scanner, Battery-Operated,

Bluetooth & QR-Code Compatible

•1 x Bluetooth receiver (USB A)

•1 x Holder

•1 x Cable, USB - RJ45, 2 m

•1 x QIG

Safety Precautions

•DO NOT stare directly into the LED light.

Do not look directly or with optical instruments into the light.

•DO NOT expose the scanner to any flammable sources.

•Under no circumstances, internal components are self-

serviceable.

•For AC power adapter, a socket outlet should be installed near

the equipment and shall be easily accessible. Make sure there is

stable power supply for the scanner or it’s peripherals to

operate properly.

Care & Maintenance

•Use a clean cloth to wipe dust off the scanning window and the

body of the scanner. DO NOT use/mix any bleach or cleaner.

•Keep the scanner away from any magnets and magnetic fields

to prevent the laser engine from malfunctioning.

•If finding the scanner malfunctioning, write down the specific

scenario and consult the local sales representative.

Note:

The scanner is BLE wireless, BLE doesn’t support WIN 7 operation

system. It supports WIN 8, WIN 10, WIN 11, Android 4.0, IOS 8.0,

MAC OS10, Linux operation system.

Product Diagram

Scan window

RJ45 connection

Anti-drop silicone

Indicator light

Specification

DIGITUS® Model

DA-81003

Support OS:

Windows, Android, IOS, Linux

Interface Support:

USB

Cable length:

2 meters

Communication distance:

8-10m indoor

10-12m in the open area

Bulit-in Memory:

2MB

Power supply:

Built-in rechargeable 3.7V/2000mA.H

lithium battery

Electrical parameter:

DC 3.3-5V, 120mA, idle 0.8μA

Scanning type:

Area imaging

Sensor:

CMOS array sensor

CPU:

ARM 32-bit Cortex

Light source:

LED (CMOS)

Trigger Mode:

Handheld / Continuous / Auto-

Induction

Auto -Induction interval

time:

1 second

Trigger/ Auto-Induction

switching time:

for 2D scanner, needs to scan the

setting barcode on user manual to

transfer from auto induction mode to

trigger mode.

Indication:

Buzzer & Indicator lamp

Printing Contract:

≥25%

Decoding speed:

200 scans/sec

Resolution:

1D: ≥5mil

2D: ≥10mil

Bit error rate:

1/5millon ,1/20million

Scanning width:

10cm

Depth of field:

EAN-13: 4.0~20.0cm (13mil)

Code128: 4.5 ~ 25.0cm (15mil)

QR Code: 4.0 ~ 18cm (15mil)

Scanning angle:

roll angel 360°,

inclination ± 60°,

deflection ± 60°

Anti inference:

Direct indoor light source

Decoding capability:

1D: GS1 Data Bar, GS1-128, ISSN, MSI,

Industrial 2 of 5, JAN-8, JAN-13, EAN-

128, Code 32, IATA, ITF, ITF-

14, Matrix

2 of 5, ITF-6, Rss limited, Rss

Expanded, Deutsche 12, Industrial 25,

Code 128, Codabar, UPC, CODA BAR,

Code 39, Code 93, BIGCODE, EAN 8,

EAN 13

2D: PDF417, QR code, Datamatrix.

Housing Material:

ABS+PC

Working times of button:

500,000 times

IP grade:

IP54

Working Temperature:

0°F-120°F/-20°C- 50°C

Storage Temperature:

-40°F-160°F/-40°C- 70°C

Relative Humidity:

5%-95% (Non-condensing)

Weight:

150g

Dimensions:

16.5 x 6.3 x 8.7cm

Applicable bar code

Manual Mode

Continuous mode

Auto sense mode

Scanner Factory Reset

Wireless Restore Factory Settings

Function Description

1. Bluetooth bar code scanner match

Bluetooth BLE HID pairing: Scan the "BLE HID" pairing code, the

LED flashes quickly, and the light is always on after the pairing is

successful.

Bluetooth BLE pass-through pairing: Scan the "BLE SPP" pairing

code, the LED flashes slowly, and the light is always on after the

pairing is successful.

2. Charging

Connect the scanner to USB cable to charge:

When charging the red light on

Charging complete green light on.

3. Indicator light

Red light on: charging mode

Flashing green: Bluetooth pairing

Green light is always on: pairing succeeded

4. Prompt instructions

A short beep: The data transmission was successful.

Three short beeps: Pairing failed; data transmission failed.

Three long beeps: Low battery alarm.

Long beep for two seconds: Memory is full.

5. Others

1) BLE Bluetooth working frequency: 2402Mhz-->2478Mhz.

2) Bluetooth BLE HID pairing: Scan the Bluetooth HID pairing

code. When the scanner in other modes, the scanner will be

turned off and the next time it is powered on to enter

pairing.

3) Bluetooth BLE SPP pairing: Scan the Bluetooth SPP pairing

code. When the scanner is in other modes, the scanner will

be turned off and the next time it is powered on to enter

pairing.

4) The working modes are: Normal, inventory, and no loss of

three working modes.

Bluetooth Setting Bar code

Bluetooth Match Setting

BLE HID mode (default)

BLE SPP mode

Language

English

German

French

Italian

Spanish

Portuguese

Finnish

Sleep Time Setting

Into sleep time setting

20secs

1mins

5mins

Not sleep

Normal working mode

Not lost mode

Inventory mode

Upload data

Total data

Zero clearing

Data Upload Speed

High-speed

Medium-speed

Low-speed

Other Setting

Shutdown

Wireless factory default

Trouble Shooting

How to pair the Bluetooth of scanner to the device:

1. Press the trigger of the scanner, the light is flashing.

2. Turn on the Bluetooth of laptop, search the Bluetooth device

“BLE SCAN”, select it and pair with scanner, once pair successful,

there is two sound "beep", the light on (not flashing)

PS: user could pair the Bluetooth either by press the scanner

trigger or scan the "Match" code on user manual

How to transfer between wireless to wired mode:

1. Plug the USB cable with the scanner to the device, the scanner

works on wired mode.

2. Unplug the USB cable with the scanner to the device, the

scanner works on wireless mode. (If the scanner has paired with

the device before, no need to pair it again upon unplug the USB

cable, the Bluetooth will be connected automatically.)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Digitus Lecteur de codes-barres

Digitus

Digitus DA-81002 Manuel utilisateur

Manuels Lecteur de codes-barres populaires d'autres marques

POSMicro

POSMicro Datalogic PowerScan D7100 Manuel utilisateur

Marson

Marson MT780 Guide de configuration rapide

NCR

NCR RealPOS Manuel utilisateur

Motorola

Motorola SE3300 Guide de configuration rapide

Element

Element P130BT Manuel utilisateur

Motorola

Motorola Symbol LS3008 Manuel d'installation et d'exploitation

Meec tools

Meec tools OBD-II / VAG Manuel utilisateur

SICK

SICK CLP 100 Manuel utilisateur

Royal Tag SA

Royal Tag SA I-Read Manuel utilisateur

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuel utilisateur

Meteor

Meteor 8310 Manuel utilisateur

Denso

Denso BHT-500B Manuel utilisateur

Datalogic

Datalogic Heron HD3130 Manuel utilisateur

Motorola

Motorola MP6000 Instructions de montage

Newland

Newland NLS-HR15-BT Manuel utilisateur

ARTDEV

ARTDEV AS-1310 Manuel utilisateur

Aopos

Aopos AS290 Manuel utilisateur

ENS

ENS 367-5455 Manuel utilisateur