Digitus professional DS-55101 Manuel utilisateur

HDMI Extender Set

Full HD, 130 m

Manual

DS-55101

The Digitus HDMI Extender Set, Full HD offers an extender solution of up to 130 m

for the highest demands. It is used to transmit digital video and audio signals to a

maximum distance of up to 130 m (via CAT 6). The highest supported video

resolution is 1080p / 60Hz. CAT 5, CAT 5E and CAT 6 network cables are supported.

The package includes two infrared units (transmitter, receiver), which can be used

for the remote control of the connected input source. LED display shows the

connectivity.

Important Safety Notice

Please read below safety instructions carefully before installation and operation:

1. Do not hot plug when it is working.

2. Do not mix up the transmitter unit (TX) and the receiver unit (RX), IR blaster

extension cable and IR receiver extension cable before installation.

3. Use DC5V/1A power supply only. Make sure specification matched if using

adapters not supplied by factory.

Feature

1. Plug and play, without installation.

2. Include a transmitter unit (TX) and a receiver unit (RX), working as a pair.

3. Transmission distance up to 120m via CAT6 cable, 100m via CAT5E cable, 80m

via CAT5 cable.

4. Support IR passback for remote control source device to receiver site easily.

5. Uncompressed and zero latency.

6. Support resolution is up to full HD 1080p@60Hz.

7. Compliant with CAT5/5e/6 for long distance transmission.

Package Contents

1x 4K HDMI Extender transmitter unit

1x 4K HDMI Extender receiver unit

2x Power Supply Unit: DC 5V/1A

1x IR transmitter unit

1x IR receiver unit

1x Instruction manual

Specification

Power Supply Voltage/Current DC5V/1A

Power consumption TX: 2W RX: <2W

HDMI

Performance

and Interface

HDMI compliance HDMI1.3

HDCP compliance HDCP1.4

HDMI resolution

720x576@50Hz,

720x480@60Hz,

1280x720@60Hz,

1920x1080@60Hz,

640x480@60Hz,

800x600@60Hz,

1024x768@60Hz,

1280x800@60Hz,

1280x1024@60Hz,

1440x900@60Hz,

1680x1050@60Hz

Supports audio formats PCM

Maximum transfer rate 10.2Gbps

Input and output TMDS signal 0.5~1.5Vp-p (TMDS)

Input and output DDC signal 5Vp-p(TTL)

Input cable length ≤8m (AWG24)

Output cable length ≤8m (AWG24)

CAT5 80m

CAT5E 100m

CAT6 130m

Protection

Level

Electrostatic protection of the

whole machine

1a contact discharge level 3,

1b air discharge level 3,

implementation of the standard:

IEC61000-4-2

Operating

Environment

Working temperature 0~60

Storage temperature -10~70°C

Humidity (no condensation) 0~90%

Body

Properties

Dimension 69.57(L) x 58.80 (W) x

16.10(H) mm

Material Aluminum alloy material +

crystal panel

Treatment process Grit blast

Color Black

Weight TX: 70g, RX: 70g

Installation Requirements

1. HDMI source device

(Computer graphics card, DVD, PS3, HD monitoring equipment etc.).

2. HDMI display device like SDTV, HDTV, and projector with HDMI port.

3. UTP/STP CAT5/5e/6 cable, follow standard IEEE-568B.

Penal Description

Transmitter unit (TX)

1) Reset button Restart the unit

2) RJ45 signal output Connect with network cable

3) LINK indicator LED turns on all the time with HDMI signal

transmission, flashes with no signal transmission

4) Power input Connect with DC5V1A power adapter

5) HDMI signal input Connect with source device

6) IR signal output Connect with IR blaster extension cable

Receiver unit (RX)

1) Reset button Restart the unit

2) RJ45 signal input Connect with network cable

3) LINK indicator LED turns on all the time with HDMI signal

transmission, flashes with no signal transmission

4) Power input Connect with DC5V1A power adapter

5) HDMI signal output Connect with display device

6) IR signal input Connect with IR receiver extension cable

Installation and Connection

A. How to make a CAT5/5E/6 network cable Follow the standard of IEEE-568B:

1. White and Orange

2. Orange

3. White and Green

4. Blue

5. White and Blue

6. Green

7. White and Brown

8. Brown

B. Connection

C. Connection

1) Connect source device to Transmitter unit (TX), and display device to Receiver

unit (RX) via HDMI cables

2) Connect Transmitter unit (TX) and Receiver unit (RX) via network cables

(CAT5, CAT5e or CAT6)

3) Plug the power supply to Transmitter unit only, each unit will power up then

initialize itself, this HDMI extender works

D. IR User Guide

1) IR blaster extension cable should plug in the IR OUT port of TX (Transmitter) unit

of HDMI extender, and the IR receiver extension cable should plug in the IR IN

port of the RX (Receiver) unit.

2) The emitter of IR blaster should as close as possible to the IR receiver window of

the signal source device.

3) Using the IR remote controller of the signal source device towards the IR receiver

(connected to the RX), to remote control source media playback.

DVD

HDMI IN Transmitter

IRIR

Receiver

HDMI Cable

HDMI Display

cable

•FAQ

Q: No image output?

A: 1) Check and make sure all cables are connected well;

2) Restart the TX/RX by “RESET” button.

Q: RX “LINK” indicator is flashing all the time?

A: 1) Make sure network cable connection follows the standard of IEEE568B;

2) Check whether transmitter has HDMI signal input;

3) Reset transmitter and receiver and reconnect.

Q: Receiver “LINK” led lights on all the time but no image output?

A: 1) Make sure the monitor supports the current HDMI signal mode

2) Make sure HDMI cable is well connected with TV

3) Make sure the network cable is fine copper wires.

Herby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the

shipping content.

If the Declaration of Conformity is missing, you can request it by post under the below

mentioned manufacturer address.

www.assmann.com

Assmann Electronic GmbH

Auf dem Schüffel 3

58513 Lüdenscheid

Germany

Table des matières

Autres manuels Digitus professional Extenseur

Digitus professional

Digitus professional DS-53200 Manuel utilisateur

Digitus professional

Digitus professional DS-55503 Manuel utilisateur

Digitus professional

Digitus professional DS-55500 Manuel utilisateur

Digitus professional

Digitus professional DS-55100-1 Manuel utilisateur

Digitus professional

Digitus professional DS-55123 Manuel utilisateur

Digitus professional

Digitus professional DS-55120 Manuel utilisateur

Digitus professional

Digitus professional DS-55500 Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur