digitalview M3-320 Manuel utilisateur
M3-320
USER GUIDE
Version 1.1
2
Revision History
Amendment Date
Version
March 2009
V1.0
September, 2010
V1.1
Page
3
Table of Contents
................................................................................1 Introduction 4
.............................................................................2 System Design 6
..................................................................................3 Quick Start 8
.................................................................................................................3.1 Prepare for connection 8
.......................................................................................................3.2 Basic connection for M3-320 9
............................................................................4 General Notes 10
.....................................................5 Connectors, pinouts & jumpers 13
............................................................................6 System Setup 22
...........................................................................................................................6.1 Select switches 22
....................................................................................................................6.2 OSD Configuration 22
.......................................................................................................................................6.3 Start up 23
..............................................................................................................6.3.1 Start track mode 23
......................................................................................................................6.3.2 Sleep mode 23
............................................................................................................................6.4 Loop Playback 24
.................................................................7 Operating Instructions 25
........................................................................................................................7.1 Operating modes 25
...................................................................................................................7.1.1 Playlist mode 25
............................................................................................................7.1.2 Simple play mode 25
....................................................................................................................7.2 Operating functions 26
................................................................................................................................7.3 USB Update 27
....................................................................................................................7.4 Formatting SD card 29
....................................................................................................7.5 Exporting Project and Playlist 30
............................................................................................................................7.6 Network setup 31
.................................................................................8 Dimension 33
..............................................................................9 Specification 34
Page
4
1Introduction
This brief guide explains how to use and set up your M3-320 decoder board. It is
intended for Digital View staff who assemble ViewStream product for demos or
for customers, and for resellers.
The M3-320 is an MPEG decoder board designed to use with Video Monitors for
playing MPEG-2/MPEG-4 video and audio files.
MPEG-2, MPEG-4* video
JPEG picture
MP3 audio file
Video signals of PAL & NTSC standard
Composite signal output
DVI output
Audio output
RS-232 port
USB Update
LAN (RJ-45) port
* DivX MPEG-4 format
IMPORTANT USAGE NOTE
☞!All media filenames must be in 16.3 format (e.g. xxxxxxxx.xxx) though
combinations with 7.3, 10.3 etc are fine.
Where: “16” is the maximum of alpha-numeric character to be used.
“3” is the file extension like .mpg / .jpg / .avi etc.
☞!Do not use any “Non alpha-numeric” characters like ‘~’, ‘_’, ‘-‘, ‘&’, ‘^’,
etc.
NOTE: If ‘Non alpha-numeric character’ or the ‘8.3’ format are not followed, the
player will not recognize the playlist.
This equipment is for use by developers and integrators; the manufacturer
accepts no liability for damage or injury caused by the use of this product. It is
the responsibility of the developer, integrators or other users of this product to:
Ensure that all necessary and appropriate safety measures are taken.
Obtain suitable regulatory approvals as may be required.
Check power settings to all component parts before connection.
DISCLAIMER
There is no implied or expressed warranty regarding this material.
Page
5
Page
6
2 System Design
M3-320 Connector Summary:
Summary:
1. Switches and buttons connector (1
– 8 button)
13. Power input (DC 12V)
1. Reserved
14. COM port
1. Remote Ext. (1-8 button)
15. Alternative Composite out and
audio out
1. Switches and button connector (9
– 16 button)
16. Audio out (Line out)
1. SD card slot
17. DVI / VGA out
1. Power / Status LEDs
18. Composite out
1. USB connector
19. LAN port (RJ-45)
1. IR connector
20. Reserved
1. Power on/off switch connector
21. DIP switch (4-pos)
1. Speaker out connector
22. Alternative LAN (WiFi)
1. Alternative DVI out
1. Alternative VGA out
Page
7
A) Mechanical buttons
•Standard MV-switchmount (P/N:416101300-3) for 1-8 buttons when
connected to the button connector CN6 via the standard switchmount
cable (P/N:426451100-3) or connected to the Remote Ext. socket
(CN5) via the standard cable (P/N:426631800-3).
•Custom made switchmount for 1-16 buttons when connected to the
buttons connector CN6 and CN3 via the standard switchmount cable (P/
N:426451100-3)
•Custom made switchmount for 1-8 buttons when connected to the
Remote Ext. socket (CN5) for alternative remote control buttons via the
standard cable (P/N:426631800-3).
B) Touch screen segments
•The M3-320 when connected with a LCD interface controller can output
videos on to LCD screen. Button control can be performed via touch
screen for panel sizes of 7”, 8”, 10”, 15” and 21.5”
•There is one type of button pattern layouts on the touch screen
available: 8 buttons
(For any special button layout, please contact local sales office.)
Fig. 1 8-buttons for LCD touch screen
C) Button function settings
•Whether the buttons are of the mechanical type (on the standard
switchmount or custom made) or the touch screen segment type, each
button function can be programmed with the DV Studio Software
program to perform a VCD player mode function or specific track select
function. (See DV Studio Software user manual).
•The DV Studio Software program is separately provided
Page
8
3 Quick Start
CAUTION: Never connect or disconnect parts of the system when the system is
powered up as this may cause serious damage.
3.1 Prepare for connection
Connection and usage are straightforward. However, care needs to be taken
with the following:
•Ensuring parts have been correctly connected – both power & signal
considerations.
•Checking that all switches and jumpers are set correctly.
•The input signal is compatible.
•Legal & safety requirements have been met.
•If you are using supplied cables & accessories, ensure they are correct
for the model of video monitor.
•If you are making your own cables & connectors refer carefully to the
video monitor specifications and the “Connectors, Pin outs & Jumpers”
section in this user guide to ensure the correct pin-to-pin wiring.
Page
9
3.2 Basic connection for M3-320
•Connect the keys pad to CN5 (if required)
•Set the DIP switch#1 (S3) to the chosen output connector.
•If Composite video output is selected, set the DIP switch#2 (S3) for
“PAL” or “NTSC” selection.
•Connect the video and audio ext. cables from the M3-320 to the
monitor.
•Connect the power supply (DC 12V @ 1.2A minimum. - ensure correct
+ & - orientation) to the controller power input (PP1).
•Connect the on/off switch cable (p/n:426680401-3) or short Pin1-2 at
PW1 for “Auto power on”
For a detailed system setup, go to section 6
Page
10
4 General Notes
The M3-320 is designed for use with Video Monitors and other analogue
signal input displays. Here are some notes for correct use:
•Preparation - Before you proceed, please familiarize yourself with the
various connectors, jacks, switches and function buttons of the M3-320
unit (see the ‘System Design’ diagram).
•The unit - Handle the unit with care; any knocking may cause
components to come loose and disconnect. Operate in a cool and dry
place.
•Power Input: 12V DC, 1.2A (minimum) is required; this should be a
regulated supply. Power connector is using DC jack, 2.5mm diameter
(Center +)
•Video output – Video - displays PAL & NTSC signals with composite
out. The PAL/NTSC switch should be set correctly.
•Audio output – Audio - Stereo output. Master volume is controlled
through OSD with switch mount buttons.
•DIP Switch settings (S3) – To define and select the source of output
and USB/LAN.
oSW1-1 (Output selection):
DVI/VGA: If it is selected, the output resolution is set to
1280x720p60Hz*
Composite: If it is selected, the video format (PAL/
NTSC) is determined by SW1-2.
oSW1-2 (PAL/NTSC selection): When using Composite output
connectors this should be set according to the input
requirements of the video display being used.
oSW1-4 (Content update selection): You may only choose either
one way (LAN or USB) to update content without removing SD
card.
Page
Table des matières
Autres manuels digitalview Convertisseur de média
