Digital Watchdog Blackjack S-RACK 1U Manuel utilisateur
State of the art hyper-optimized video management platform designed for ease, speed and efciency.
Blackjack™S-RACK — Up to 16 2.1MP Cameras (1080p True HD Resolution)
NOTE: Download All Your Support Materials and Tools in One Place
1. Go to: http://www.digital-watchdog.com/support-download/
2. Search your product by entering the part number in the ‘Search by Product’ search bar. Results for applicable part numbers will
populate automatically based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals, Quick Start Guides (QSG), software and rmware will appear in the results.
Quick Start Guide
ATTENTION This document is intended to serve as a quick reference for initial set-up. See the DW Spectrum™IPVMS full manual for
more information on features and functionality.
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday thru Friday
digital-watchdog.com
NOTE: Monitor and network cables are not included.
DW-BJS1U3T-LX DW-BJS1U6T-LX DW-BJS1U9T-LX DW-BJS1U12T-LX DW-BJS1U18T-LX DW-BJS1U24T-LX
Blackjack S-RACK
WHAT’S IN THE BOX
S-RACK Server 1 Set Quick Start Guide 1 Set
OS Recovery USB
(Emergency
Recovery)
1 Set
Keyboard and
Mouse 1 Set Power Cable (x2) 1 Set Patch Cable 1 Set
** UPS Recommended
SPECIFICATIONS S-RACK
2
MODEL Blackjack S-RACK 1U
Maximum IP Cameras 16
Included IP Licenses 4
Form Factor Rack Mount
Operating System Linux®Ubuntu®DW-BJS1UXXT
CPU Intel® Quad Core N3150 Processor
Memory 4GB
NIC 2x Gigabit Ethernet (RJ45)
System Max Video Storage Rate
(Mbps) 80 Mbps
Built-in PoE Ports PoE Switch 16 x 10/100Mbps PoE Ports + 2 x Gigabit Uplink Ports
Number of PoE Ports 16 (Class3; 15.4W per Ports)
Storage Maximum Hard Drives 1 x SSD + 3 x HDD
Maximum Storage 24TB
Video-Out Outputs True HD Output, DVI, Display Port
Video Card AMD FinePro W4100
Keyboard & Mouse Included
Power System 300W**
PoE Switch Up to 270W**
Operating Temperature and Humidity 41°F-104°F / 20-90% RH
Dimension (WxDxH) (inches) 17.25” x 20.8” x 1.625”
Warranty 5 Year Limited
BLACKJACK S-RACK HARDWARE
B1 System Power Port
B2 PoE Switch Power Port
B3 10/100Mbps PoE Ports
(Max 15.4W per Port)
B4 1Gigabit Uplink Ports
(Non-PoE Ports)
B5 USB 2.0 Ports
B6 NIC 1 (1Gigabit Ethernet Port)
B7 Display Port
B8 NIC 2 (1Gigabit Ethernet Port)
B9 Audio Ports
B10 DVI-D Output
B11 True HD Output
B12 USB 3.0 Ports
F1 USB 2.0 Ports
F2 Power Status LED
F3 Power Button
F4 HDD Status LED
1. Connect B8 to main local network and internet
2. Connect/Uplink B4 upper port and B6
3. Connect B4 lower port to router or DHCP server (No internet access through B4)
NOTE: B3, B4 and B6 ports should be used for the camera network only.
F1 F3
F2 F4
Front
B1 B2 B4 B10 B11 B12
B3
Back
B8B6B5 B9B7
MAIN LOCAL
NETWORK /
INTERNET
ROUTER / DHCP SERVER
B8
B4
B4 to B6
Network Cable Connection
B4
B3 B6
Ports to be used for
the camera network only
(Patch cable included)
SETTING UP THE S-RACK
STEP 1: Connect peripherals, power and network
1. Connect a monitor, USB keyboard, USB mouse, and network cable to the camera network (B8 on the diagram).
* Cable for the Local Network should be connected after the IP settings are congured.
2. Connect the server to an appropriate power source. Recommended to use 750VA or higher UPS system.
3
Quick Start Guide
MAIN LOCAL
NETWORK /
INTERNET
ROUTER / DHCP SERVER
Monitor
Keyboard
Mouse
UPS System
IP Camera
MAIN LOCAL
NETWORK /
INTERNET
ROUTER / DHCP SERVER
B8
4
3. Turn on the server if the server does not turn on automatically.
(Press the Power Button on the front of the BOLT. F2 on the diagram).
* Connecting the power cable to the live power source may turn on the server automatically
STEP 2: Set Date and Time
1. Update Date and Time by clicking on the time on the upper right-hand corner then click “Time & Date settings…”
2. If the server will be connected to the Internet, leave Set the Time to “Automatically from the Internet” and update the Location
to the correct Time Zone. Enter the nearest major city to select the correct Time Zone. If it shows multiple cities in the list,
select the correct city. (e.g., New York for EST, Chicago for CST, Denver for MST, and Los Angeles for PST)
3. Click X on upper left corner of the Time and Date window when done.
* Closing the window will automatically save the changes made.
5
Quick Start Guide
STEP 3: Congure Network
Please have the following information ready before starting the network conguration.
Camera Network Local Network (LAN)
IP Address
Netmask
Gateway Not Applicable
DNS Servers Not Applicable
* Camera Network and Local Network cannot be on the same network.
* Netmask is also known as Subnet Mask. Gateway is also known as Default Gateway.
Once you have all the information, double-click the Network icon on the Desktop
1. Select ‘Wired’ that has arrows pointing up and down from the list (If neither of the “wired” are showing arrows up and downs,
then make sure the network cable is connected to the PoE switch on the camera network from STEP 1)
2. Click ‘Options’ at the bottom of the window.
3. Click on the ‘IPv4 Settings’ tab.
4. From the drop-down menu, select connection type (“Method”) as Manual.
5. Click ‘Add’ next to Addresses.
NOTE The Blackjack BOLT’s network settings are set to DHCP as default.
NOTE If you are not sure what information to enter, contact your Network Administrator or Internet Service Provider
for the information.
6
6. Enter IP Address then press Tab on the keyboard to move to Netmask.
7. Ignore any populated values and enter the valid Netmask value, then press Tab on the keyboard to move to the Gateway.
8. Enter the Gateway address if required then press Enter on the keyboard.
* Gateway is not required on the camera network.
9. Click ‘Save’ to save the settings.
10. In the Network Settings main page, make sure the Wired Status is marked as “Connected”
or “Managed” with the IP Address displayed.
NOTE It must be the same network as the cameras and must not be the same network as the local network.
Contact your network administrator for more information.
Local Network
11. Select Wired with picture of network port and repeat 2 to 8 of STEP 3 Congure Network.
7
Quick Start Guide
STEP 1: Initial run from Blackjack®server
1. Open DW Spectrum®Client by double click on the DW Spectrum icon
2. Click on the precongured server.
Login : admin
Password : admin1234
12. Click on the DNS Servers eld box and enter DNS server address.
13. Click Save.
14. Connect a network cable from B10 Ethernet port on the diagram (page 2)
to the switch connecting to the local network.
15. Verify the network is Connected.
NOTE If you are not connecting to the Blackjack®from within the same network, you may be required to perform port forwarding on your
router to access the server. Contact your Network Administrator or Installer for additional information
SETTING UP DW SPECTRUM®MEDIA SERVER
B10
3. Enter password and click connect.
*Default password : admin1234 (case sensitive)
8
STEP 2: To rename the server
1. Right click on the server name listed on the Resources then click Server Settings.
9
Quick Start Guide
2. Go to General tab, then type in the new server name in the Name eld and click OK.
STEP 3: To check for update
1. Click on the menu then click System Administration.
10
2. Go to Updates tab. Click Update System if turned orange.
3. Click OK when update is completed.
*If you are on the latest version, it will say “You have the latest version installed” and the Update System button will be greyed out.
Ce manuel convient aux modèles suivants
6
Table des matières
Autres manuels Digital Watchdog Serveur
Digital Watchdog
Digital Watchdog Blackjack Tower Manuel utilisateur
Digital Watchdog
Digital Watchdog Blackjack C2P Manuel utilisateur
Digital Watchdog
Digital Watchdog Blackjack Tower DW-BJT71xxT/LX Manuel utilisateur
Digital Watchdog
Digital Watchdog Blackjack Ai Manuel utilisateur
Digital Watchdog
Digital Watchdog Blackjack BOLT DW-BJBOLT2T-LX Manuel utilisateur
Digital Watchdog
Digital Watchdog DW-BJER4U Manuel utilisateur
Digital Watchdog
Digital Watchdog Blackjack Ai DW-BJAiMT T Series Manuel utilisateur
Digital Watchdog
Digital Watchdog BlackJack CUBE Manuel utilisateur
Digital Watchdog
Digital Watchdog Blackjack X-Rack Manuel utilisateur
Digital Watchdog
Digital Watchdog Blackjack Tower DW-BJMT31 T/LX Series Manuel utilisateur
Digital Watchdog
Digital Watchdog Blackjack DX DW-BJDX11 T-LX Series Manuel utilisateur
Digital Watchdog
Digital Watchdog DW-BJCUBE4T-DL Manuel utilisateur
Digital Watchdog
Digital Watchdog Blackjack Tower DW-BJST51T Series Manuel utilisateur
Digital Watchdog
Digital Watchdog Blackjack DW-BJRR2U T Series Manuel utilisateur
Digital Watchdog
Digital Watchdog Blackjack bolt DW-BJB0LT2T-LX Manuel utilisateur
Digital Watchdog
Digital Watchdog Blackjack Ai DW-BJAiT TR Series Manuel utilisateur
Digital Watchdog
Digital Watchdog Blackjack Ai DW-BJAI2R T Series Manuel utilisateur
Digital Watchdog
Digital Watchdog DW-BJER2U Manuel utilisateur
Digital Watchdog
Digital Watchdog DW-BJER2U Manuel utilisateur
Digital Watchdog
Digital Watchdog Blackjack Tower DW-BJT71 T/LX Series Manuel utilisateur
