Digital Watchdog DWC-MB72Wi4TW Manuel utilisateur
User’s Manual Ver. 05/23
Before installing and using the camera, please read this manual carefully.
Be sure to keep it handy for future reference.
MEGApix® 2.1MP/1080p bullet IP camera
DWC-MB72Wi4T – IVA pre-loaded, gray housing
DWC-MB72Wi4TW – IVA pre-loaded, white housing
DWC-MPB72Wi4T – IVA+ pre-loaded, gray housing
DWC-MPB72Wi4TW – IVA+ pre-loaded, white housing
WARNING
To prevent damage which may result in fire or electric shock
hazard, do not expose this appliance to rain or moisture.
WARNING
1. Be sure to use only the standard adapter that is
specified in the specification sheet. Using any other
adapter could cause fire, electrical shock, or damage to
the product.
2. Incorrectly connecting the power supply or replacing
the battery may cause an explosion, fire, electric shock,
or damage to the product.
3. Do not connect multiple cameras to a single adapter.
Exceeding the capacity may cause excessive heat
generation or fire.
4. Securely plug the power cord into the power
receptacle. An insecure connection may cause fire.
5. When installing the camera, fasten it securely and
firmly. A falling camera may cause personal injury.
6. Do not place conductive objects (e.g. screwdrivers,
coins, metal items, etc.) or containers filled with water
on top of the camera. Doing so may cause personal
injury due to fire, electric shock, or falling objects.
7. Do not install the unit in humid, dusty, or sooty
locations. Doing so may cause fire or electric shock.
8. If any unusual smells or smoke come from the unit, stop
using the product. Immediately disconnect the power
source and contact the service center. Continued use in
such a condition may cause fire or electric shock.
9. If this product fails to operate normally, contact the
nearest service center. Never disassemble or modify
this product in any way.
10. When cleaning, do not spray water directly onto parts
of the product. Doing so may cause fire or electric
shock.
Precaution
Operating
• Before using, make sure the power supply and all other
parts are properly connected.
• While operating, if any abnormal condition or
malfunction is observed, stop using the camera
immediately and contact your dealer.
Handling
• Do not disassemble or tamper with parts inside the
camera.
• Do not drop the camera or subject it to shock or
vibration as this can damage the camera.
• Clean the clear dome cover with extra care. Scratches
and dust can ruin the quality of the camera image.
Installation and Storage
• Do not install the camera in areas of extreme
temperature, exceeding the allowed range.
• Avoid installing in humid or dusty environments.
• Avoid installing in places where radiation is present.
• Avoid installing in places where there are strong
magnetic fields and electric signals.
• Avoid installing in places where the camera would be
subject to strong vibrations.
• Never expose the camera to rain or water.
Warning
This symbol indicates that dangerous
voltage consisting of a risk of electric
shock is present within this unit.
Precaution
This exclamation point symbol is intended
to alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION :
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE
PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
3
Important Safety Instructions
1. Read these Instructions. - All these safety and operating instructions should be read before the product is installed
or operated.
2. Keep these Instructions. - The safety, operating and use instructions should be retained for future reference.
3. Heed all warnings. - All warnings on the product and in the operating instructions should be adhered to.
4. Follow all instructions. - All operating and use instructions should be followed.
5. Do not use this device near water. - For example: near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement; near a swimming pool; etc.
6. Clean only with a dry cloth. - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners.
7. Do not block any ventilation openings. Install following the manufacturer’s instructions. - Slots and openings
in the cabinet are provided for ventilation, to ensure reliable operation of the product, and to protect it from over-
heating. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surfaces.
This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided and the manufacturer’s instructions have been adhered to.
8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Disposal of Old Appliances
1. When this crossed-out wheel bin symbol is attached to a product it means the
product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the
municipal waste stream per laws designated by the government or the local
authorities.
3. The correct disposal of your old appliance will help prevent potential negative
consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact
your city office, waste disposal service or the shop where you purchased the product.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
Introduction
Product and Accessories......................................................................................................................................................................5
Parts Notifications......................................................................................................................................................................6
Installation
Disassemble the Camera..................................................................................................................................................................................7
Factory Reset....................................................................................................................................................................................................7
Installation..........................................................................................................................................................................................7
Cabling............................................................................................................................................................................................8
Managing the SD Card................................................................................................................................................................................9
Network Setup
DW IP Finder.................................................................................................................................................................................................................10
Web Viewer
Login to the Camera................................................................................................................................................................................................11
GUI Overview.......................................................................................................................................................................................................12
Camera Settings
Settings > Video and Audio Setup......................................................................................................................................................................13
Settings > Camera Setup > Image Enhancement........................................................................................................................................21
Settings > Camera Setup > Exposure Settings............................................................................................................................................22
Settings > Camera Setup > Day and Night Settings...................................................................................................................................23
Settings > Camera Setup > Backlight Settings............................................................................................................................................24
Settings > Camera Setup > White Balance Settings..................................................................................................................................25
Settings > Camera Setup > Image Enhancement Settings....................................................................................................................26
Settings > Network Setup.......................................................................................................................................................................................27
Settings > Trigger Action Setup..........................................................................................................................................................................37
Settings > Event Setup.............................................................................................................................................................................................41
Settings > Record Setup..........................................................................................................................................................................................46
Settings > Security Setup.......................................................................................................................................................................................52
Settings > System Setup > System Information..........................................................................................................................................59
Settings > System Setup > Firmware...............................................................................................................................................................61
Settings > System Setup > Date and Time.....................................................................................................................................................62
Settings > System Setup > DST............................................................................................................................................................................63
Settings > System Setup > Users.........................................................................................................................................................................64
Settings > System Setup > System Log..........................................................................................................................................................65
Settings > System Setup > Factory Reset......................................................................................................................................................66
Settings > System Setup > Restart....................................................................................................................................................................67
Settings > System Setup > System Open Source License......................................................................................................................68
Appendix......................................................................................................................................................................69
FAQs......................................................................................................................................................................76
Dimensions......................................................................................................................................................................77
Specifications......................................................................................................................................................................78
Warranty...............................................................................................................................................79
Limits and Exclusions................................................................................................................................................................80
Table of Contents
4
5
Introduction -
Product and Accessories
Star Wrench
Mounting
Template
Waterproof Cap and
Gasket
Screws and Plastic
Anchors - 4pcs
Camera
Cables
Please check that the camera and all accessories are included in the package.
Quick Setup
Manual
6
Introduction -
Part Name
Lens
Waterproof cap
RJ-45 Connector
DC Power Jack
Bracket
Pan/Tilt Stoper
Screw
Reset Button
SD Card Slot
7
Installation -
Installation
Mounting Template
Reset Button
Before installing your camera, you have to read the following cautions.
1. The mounting surface must withstand five times the camera weight.
2. Do not let the cables get caught in improper places or the electric line cover can be damaged. This may
cause a short or fire.
1. Using the mounting template sheet or the
camera itself, mark and drill the necessary
holes in the wall or ceiling.
2. Pass the wires through the mount bracket and
make all necessary connections. See page 12
for more information.
3. To use the camera’s waterproof wiring:
a. Install the LAN cable into (a) .
b. (b) will be assembled to (a) with a 1/4 turn.
c. Thread (c) tightly to (b).
NOTE: to ensure a proper moisture seal,
make sure the o-ring is in place between (a)
and (b). In extreme environments, use an
outdoor-rated sealer.
NOTE: When using the waterproof cap,
crimp the RJ-45 connected after passing the
camera through the waterproof cap.
4. Fix the camera's bracket to the mounting
surface using the screws provided.
5. If needed, adjust the
camera's tilt by
loosening the pan/tilt
stopper screw.
6. Once the camera's
tilt and panning are
adjusted, secure the
stopper screw back.
ab
c
Reset to the Factory Default
Press the reset button for 5 seconds to return the
setup to the factory default.
Warning:
If you press the ‘Reset’ button, you will lose all
setting data. If needed, please, make a note for
further installation.
8
Installation -
Cabling
1. Using a PoE-Enabled Switch
The Camera is PoE-compliant, allowing transmission
of power and data via a single Ethernet cable.
PoE eliminates the need for the different cables used
to power, record, or control the camera. Follow the
illustration below to connect the camera to a PoE-
enabled switch using an Ethernet cable.
2. Using a Non-PoE Switch
If a PoE-enabled switch is not used, use a power
adaptor for power transmission and non-PoE switch
for data transmission.
Follow the illustrations below to connect the camera
without a PoE-enabled Switch.
Two Options
Use a PoE-enabled switch to connect data and power through a single cable and begin viewing and recording
images instantly.
A non-PoE switch will require an adaptor for power transmission.
Ethernet Cable Ethernet Cable
Power
9
Installation -
Inserting/Removing an SD Memory Card
Micro
The memory card is an external data storage
device that has been developed to offer an
entirely new way to record and share video,
audio, and text data using digital devices.
Recommended SD card specification
(not included)
1 Inserting an SD Memory Card
Insert the SD card in the arrow direction. The SD
card slot is located on the back of the camera,
under the mounting bracket.
Do not insert the SD memory card while it’s
upside down by force. Otherwise, it may
damage the SD memory card.
2 Removing an SD Memory Card
Gently press down on the exposed end of the
memory card as shown in the diagram to eject the
memory card from the slot.
Pressing too hard on the SD memory card can
cause the card to shoot out uncontrollably from
the slot when released.
If you have saved data in the SD memory card,
removing the SD memory card before setting
the record to OFF will cause damage to the data
stored in the card.
-Maximum SD Card size supported: Up
to 1TB micro SD / exFAT.
-When inserting the SD card into the
card slot, the SD card’s contacts should
be facing upward, as shown in the
diagram.
Network Setup -
DW IP Finder™
1Go to http://www.digital-watchdog.com and search for ‘IP Finder’ on the
quick-search bar at the top of the page.
2 The latest IP Finder software will appear in the search results. Click on
the link to download the file to your computer.
3 The software will scan your network for all supported cameras and
display the results in the table. Allow up to 5 seconds for the IP Installer
to find the camera on the network.
4 You can press the ‘Refresh List’ to search the network again, or filter the
search results by entering a value in the filter box.
5 Check the box next to ‘Display Camera Thumbnail’ to view a JPEG image
of the camera’s view next to the camera name on supported models.
The default network type of camera is DHCP mode.
If you have a DHCP server, it will automatically set the Camera IP.
Contact your network administrator for more information.
6 To save the changes made to the camera's settings, input the username
and password of the camera for authentication.
7 If the camera needs to be rebooted after the settings were changed,
press the 'Reboot' button. The camera will power cycle and will appear back in the search results once
the reboot is complete.
Default username and password: admin/admin.
For security purposes, it is highly recommended to change your password after the initial setup.
8 Click 'Save' to save changed values.
9 To update the camera's firmware from the DW IP Finder™, click on the firmware tab, upload the firmware
file and select the camera to update. You can update multiple cameras at the same time.
10
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Digital Watchdog Caméra de sécurité
Digital Watchdog
Digital Watchdog B3252DIR Series Manuel utilisateur
Digital Watchdog
Digital Watchdog DWC-LPR650U Manuel utilisateur
Digital Watchdog
Digital Watchdog DWC-V1312XW Manuel utilisateur
Digital Watchdog
Digital Watchdog STAR-LIGHT DWC-D4283WD Manuel utilisateur
Digital Watchdog
Digital Watchdog PTZ39XFM Manuel utilisateur
Digital Watchdog
Digital Watchdog Star-Light DWC-V7253 Manuel utilisateur
Digital Watchdog
Digital Watchdog Starlight V3363DH Manuel utilisateur
Digital Watchdog
Digital Watchdog Star-Light Plus HD over Coax... Manuel utilisateur
Digital Watchdog
Digital Watchdog MEGAPix MV421D/B Manuel utilisateur
Digital Watchdog
Digital Watchdog MEGApix DWC-MD72Di28T Manuel utilisateur
Digital Watchdog
Digital Watchdog STAR-LIGHT DWC-V6263WTIR Manuel utilisateur
Digital Watchdog
Digital Watchdog MEGAPIX DWC-MT95WW28TW Manuel utilisateur
Digital Watchdog
Digital Watchdog DWC-MB44iALPR Manuel utilisateur
Digital Watchdog
Digital Watchdog STAR-LIGHT PLUS DWC-V6863WTIRW Manuel utilisateur
Digital Watchdog
Digital Watchdog Star-Light Plus DWC-MC553WTIR Manuel utilisateur
Digital Watchdog
Digital Watchdog MC421D Manuel utilisateur
Digital Watchdog
Digital Watchdog MEGApix DWC-MV85WiAT Manuel utilisateur
Digital Watchdog
Digital Watchdog V1312XW Manuel utilisateur
Digital Watchdog
Digital Watchdog MEGAPIX PANO DWC-PZV2M72T Manuel utilisateur
Digital Watchdog
Digital Watchdog Megapix DWC-MV72I28V Manuel utilisateur
Digital Watchdog
Digital Watchdog STAR-LIGHT DWC-D4283WTIR Manuel utilisateur
Digital Watchdog
Digital Watchdog MEGApix Snapit DWC-MV421DB Manuel utilisateur
Digital Watchdog
Digital Watchdog DWC-V5661T Manuel utilisateur
Digital Watchdog
Digital Watchdog STAR-LIGHT Universal HD over Coax... Manuel utilisateur
