Digital Watchdog D1362D Series Manuel utilisateur

D1362D Series

About manual

INSTRUCTION MANUAL

Before installing and using the camera, please read this

man al caref ll

5436 W Crenshaw Street

Tampa, FL 33634

www.digital-watchdog.com

Technical Support : 1-866-446-3595 / 813-888-9555

Before installing and using the camera, please read this

manual carefully.

Be sure to keep it handy for future reference.

5436 W Crenshaw Street

Tampa, FL 33634

www.digital-watchdog.com

Technical Support : 1-866-446-3595 / 813-888-9555

PRECAUTIONS

■Do not open or modify

Do not open the case except during maintenance and installation,

as it may be dangerous and cause damages.

■Do not put objects inside the unit

Make sure that no metal objects or flammable substances

get inside the camera. It could cause fire, short-circuits or damages.

■Be careful when handling the unit

To prevent damage, do not drop the camera or subject it to

strong shock or vibration.

■Install away from electric or magnetic fields

■Protect from humidity and dust

■Protect from high temperature

Be careful when installing close to the ceiling , in a kitchen or boiler

room, as the temperature may rise to high levels.

■Cleaning

Dirt can be removed from the case only by wiping it with a soft cloth

moistened with a soft deter

ent solution.

■Do not open or modify

Do not open the case except during maintenance and installation,

as it may be dangerous and cause damages.

■Do not put objects inside the unit

Make sure that no metal objects or flammable substances

get inside the camera. It could cause fire, short-circuits or damages.

■Be careful when handling the unit

To prevent damage, do not drop the camera or subject it to

strong shock or vibration.

■Install away from electric or magnetic fields

■Protect from humidity and dust

■Protect from high temperature

Be careful when installing close to the ceiling , in a kitchen or boiler

room, as the temperature may rise to high levels.

■Cleaning

Dirt can be removed from the case only by wiping it with a soft cloth

moistened with a soft detergent solution.

■Mounting Surface

The mounting surface material must be strong enough to support

the camera.

TROUBLESHOOTING

Before sending the camera out for repair, check the items below.

If the problem persists after checking these items, contact your service

center.

■If no image appears

Is the coaxial cable attached securely?

Are the power and voltage normal?

Has the iris of the lens inside the camera been

adjusted correctly (with the level volume) ?

Is there adequate illumination?

■If the image is unclear

Is the lens in focus?

Is the lens dirty?

Dirt or fingerprints on the lens can adversely affect the

images. Gently wipe any dirt or fingerprints off the lens

with a soft cloth or lens cleaning paper and cleaning

fluid (commercially available).

Before sending the camera out for repair, check the items below.

If the problem persists after checking these items, contact your service

center.

■If no image appears

Is the coaxial cable attached securely?

Are the power and voltage normal?

Has the iris of the lens inside the camera been

adjusted correctly (with the level volume) ?

Is there adequate illumination?

■If the image is unclear

Is the lens in focus?

Is the lens dirty?

Dirt or fingerprints on the lens can adversely affect the

images. Gently wipe any dirt or fingerprints off the lens

with a soft cloth or lens cleaning paper and cleaning

fluid (commercially available).

Is the monitor adjusted correctly?

WARNING:

TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE.

DIMENSION (mm)

INSTALLATION

A. Loosen the fixing screw using the L-wrench.

B. Separate the upper case and the base case.

C. Loosen the inner screws using a screwdriver.

D. Detach the gimbal from the base case.

E. Cut a hole in the ceiling for routing the cables.

F. Place the camera horizontally on the ceiling,

drill the screw holes at the marked two positions.

G. Pass the power cable and video cable from the

camera unit through the cable hole in the ceiling.

H. Align the screw holes of the camera unit with

the holes in the ceiling, secure with the two screws.

I. Fix gimbal to the base.

J. Install and ad

ust the camera unit.

A. Loosen the fixing screw using the L-wrench.

B. Separate the upper case and the base case.

C. Loosen the inner screws using a screwdriver.

D. Detach the gimbal from the base case.

E. Cut a hole in the ceiling for routing the cables.

F. Place the camera horizontally on the ceiling,

drill the screw holes at the marked two positions.

G. Pass the power cable and video cable from the

camera unit through the cable hole in the ceiling.

H. Align the screw holes of the camera unit with

the holes in the ceiling, secure with the two screws.

I. Fix gimbal to the base.

J. Install and adjust the camera unit.

K. Adjust the dome to show the lens through the

camera window, attach to the base.

L. Put the upper case and the base together.

M. Tighten the screw for the upper/base cases not

to be separated .

CONNECTION

DC12V/AC24V

CAUTION :

Check for polarity when using a 12V DC power supply.

DC12V/AC24V

LENS ADJUSTMENT & GIMBAL ADJUSTMENT

1. Adjust the panning(360˚) and tilt(60˚) position.

2. Setting the zoom position by using Zoom Lever Screw.

3. Setting the focus by using Focus Lever Screw.

D1362D Camera

CAMERA SETTINGS

(1) Adjusting level volume (VR)

If the entire image is too dark or bright, or the backlight compensation is not correct

even after LENS is set to "DC", you need to adjust the level volume.

CCW (Low) Closes the lens iris, making the entire image darker

CW(High) Opens the lens iris, making the entire image drighter

(2) SECOND VIDEO OUT CONNECTOR (2ND VIDEO)

If installer do setting with protable monitor, this connector should be connected.

OSD SWITCH FUNCTIONS

SETUP FUNCTION SUMMARY

LENS MANUAL.DC - DC : bright level

SHUTTER FIXED,MANUAL,FLK - MANUAL : Manual shutter adjust.

- BLCAREA

- BLC RATIO

AGC ON,OFF - AGCGAIN:Min~Max

- MANUAL : RED,BLUE

- FIXED: MODE1,2,3,4

- CONTRAST adjust.

- SHARPNESS adjust.

- CB_GAINadjust.

- CR_GAINadjust.

FUNCTION ☜

- CAMERA ID

- POSITION

MIRROR ON,OFF - Mirror image on/off

- AUTO: DELAY

START LEVEL

DAY NIGHT

AUTO B/W COLOR

ADJUST CONTRAST,SHARPNESS

CB_GAIN,CR_GAIN

CAMERA ID ON,OFF

BLC ON,OFF

WHITEBAL ATW,AWB,FIXED,MANUAL

SETUP FUNCTION SUMMARY

LENS MANUAL.DC - DC : bright level

SHUTTER FIXED,MANUAL,FLK - MANUAL : Manual shutter adjust.

- BLCAREA

- BLC RATIO

AGC ON,OFF - AGCGAIN: Min~Max

- MANUAL : RED,BLUE

- FIXED: MODE1,2,3,4

- CONTRAST adjust.

- SHARPNESS adjust.

- CB_GAINadjust.

- CR_GAINadjust.

FUNCTION ☜

- CAMERA ID

- POSITION

MIRROR ON,OFF - Mirror image on/off

- AUTO: DELAY

STARTLEVEL

ENDLEVEL

- AREA

- MOTION TH

- MOTION TRACE ON/OFF

- AREA SEL

- AREA STATE

GAMMA USER, 0.05~1.0 - GAMMA set.

LANGUAGE ENGLISH,Korean,Chinese1,Chinese

2,日本語 - Language set.

RESET YES,NO - Returns to the level

EXIT - Save out

PRIVACY ON.OFF

DAY NIGHT AUTO,B/W,COLOR

MOTION ON,OFF

ADJUST CONTRAST,SHARPNESS

CB_GAIN,CR_GAIN

CAMERA ID ON,OFF

BLC ON,OFF

WHITEBAL ATW,AWB,FIXED,MANUAL

WARRANTY INFORMATION

Digital Watchdog (referred to as “the Warrantor”) warrants the Camera

Series against defects in materials or workmanship as follows:

LABOR: For the initial five (5) years from the date of original purchase, if the

camera is determined to be defective, the Warrantor will repair or replace the

unit, with

new or refurbished product at its option, at no charge.

PARTS: In addition, the Warrantor will supply replacement parts for the initial

five (5) years.

To obtain warranty or out of warranty service, please contact a Technical

Support Representative at 1-866-446-3595 Monday through Friday from 9:00

AM to 5:00 PM Eastern.

A purchase receipt or other proof of the date of the original purchase is

required before warranty service is rendered. This warranty only covers

failures due to defects in materials and workmanshi

which arise durin

Digital Watchdog (referred to as “the Warrantor”) warrants the Camera

Series against defects in materials or workmanship as follows:

LABOR: For the initial five (5) years from the date of original purchase, if the

camera is determined to be defective, the Warrantor will repair or replace the

unit, with

new or refurbished product at its option, at no charge.

PARTS: In addition, the Warrantor will supply replacement parts for the initial

five (5) years.

To obtain warranty or out of warranty service, please contact a Technical

Support Representative at 1-866-446-3595 Monday through Friday from 9:00

AM to 5:00 PM Eastern.

A purchase receipt or other proof of the date of the original purchase is

required before warranty service is rendered. This warranty only covers

failures due to defects in materials and workmanship which arise during

normal use. This warranty does not cover damage which occurs in shipment

or failures which are caused by products not supplied by the Warrantor or

failures which result from accident, misuse, abuse, neglect, mishandling,

misapplication, alteration, modification, faulty installation, set-up adjustments,

improper antenna, inadequate signal pickup, maladjustment of consumer

controls, improper operation, power line surge, improper voltage supply,

lightning damage, rental use of the product or service by anyone other than

an authorized repair facility or damage that is attributable to acts of God.

Table des matières

Autres manuels Digital Watchdog Caméra de sécurité

Digital Watchdog

Digital Watchdog STAR-LIGHT PLUS DWC-B6853WTIRW Manuel utilisateur

Digital Watchdog

Digital Watchdog Snapit DWC-V4382D Manuel utilisateur

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-MC553WTIR Manuel utilisateur

Digital Watchdog

Digital Watchdog MEGAPIX DWC-MV45WiATW Manuel utilisateur

Digital Watchdog

Digital Watchdog MEGApix Ai ANPR Manuel utilisateur

Digital Watchdog

Digital Watchdog MC352-29 Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-D3661T Manuel utilisateur

Digital Watchdog

Digital Watchdog MEGApix PanO DWC-PPVF9Di2TW Manuel utilisateur

Digital Watchdog

Digital Watchdog STAR-LIGHT DWC-B2623WTIRW Manuel utilisateur

Digital Watchdog

Digital Watchdog Star-Light DWC-B6263TIR Manuel utilisateur

Digital Watchdog

Digital Watchdog MegaPix Pano DWC-PVF5M1TIRC6 Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-V6763WTIR Manuel utilisateur

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-VA553WTIR Manuel utilisateur

Digital Watchdog

Digital Watchdog Star-Light Plus Universal HD over Coax... Manuel utilisateur

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-B6563WTIR Manuel utilisateur

Digital Watchdog

Digital Watchdog MEGApix DWC-MVC8WiATW Manuel utilisateur

Digital Watchdog

Digital Watchdog MEGApix DWC-MTT4WiA Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-V4783WD Manuel utilisateur

Digital Watchdog

Digital Watchdog STAR-LIGHT Flex DWC-VS753WT2222 Manuel utilisateur

Digital Watchdog

Digital Watchdog Starlight DWC-B6563DIR Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-B1362TIR650 Manuel utilisateur

Digital Watchdog

Digital Watchdog Star-Light DWC-B6763TIR Manuel utilisateur

Digital Watchdog

Digital Watchdog Starlight V3363D Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-V7253TIR Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur