Digital Security Controls PC1616 Manuel utilisateur

PC1616/PC1832/PC1864 v4.1

DLS2002 and higher

PC1616 / PC1832 / PC1864

This manual contains information on limitations regarding product use and function and information on the limitations as to liability

of the manufacturer. The entire manual should be carefully read.

Reference Manual

Secti n 1: Intr ducti n 1

1.1 About the PC1616/PC1832/PC1864 System . . . . . . . 1

1.2 About the PC1616/PC1832/PC1864 Manual Set . . . . 1

Reference Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Installat on Gu de . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Programm ng Worksheets . . . . . . . . . . . . . . . . . . . . . . 1

User Gu de . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.3 Control and Ind cat ng Equ pment Spec f cat ons . . . . 1

Zone Conf gurat on. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Access Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Warn ng Devce output . . . . . . . . . . . . . . . . . . . . . . . . . 2

Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Programmable Outputs (PGMs). . . . . . . . . . . . . . . . . . 2

Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Operat ng Envronmental Cond t ons . . . . . . . . . . . . . . 2

Keypad Spec f cat ons . . . . . . . . . . . . . . . . . . . . . . . . . 2

Alarm Transm tter Equpment (ATE) Spec f cat on. . . . 2

System Supervs on Features. . . . . . . . . . . . . . . . . . . . 2

False Alarm Prevent on Features. . . . . . . . . . . . . . . . . 2

Add tonal Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.4 Add tonal Dev ces . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Keypads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

PC5100 2-W re Addressable Interface Module . . . . . . 3

PC5108 E ght Zone Expander Module. . . . . . . . . . . . . 3

PC5132 W reless Recever Module . . . . . . . . . . . . . . . 3

PC5200 Power Supply Output Module. . . . . . . . . . . . . 3

PC5204 Power Supply Output Module. . . . . . . . . . . . . 3

PC5208 E ght Low Current Output Module . . . . . . . . . 3

Escort5580(TC) Module . . . . . . . . . . . . . . . . . . . . . . . . 3

PC5900 Aud o Ver fcat on Module. . . . . . . . . . . . . . . . 3

PC5400 Pr nter Module . . . . . . . . . . . . . . . . . . . . . . . . 3

PC5401 Ser al Interface Module. . . . . . . . . . . . . . . . . . 3

T-L nk Local Area Network Communcator. . . . . . . . . . 3

TL250/TL300 Intranet/Internet Commun cators . . . . . . 3

Alternate Commun cators. . . . . . . . . . . . . . . . . . . . . . . 3

PC5700/PC5720 F re Module. . . . . . . . . . . . . . . . . . . . 4

Enclosures/Cabnets. . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.5 Battery Standby Tmes versus AUX Load . . . . . . . . . . 4

Secti n 2: Installati n and Wiring 5

2.1 Installaton Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.2 Term nal Descr pt ons . . . . . . . . . . . . . . . . . . . . . . . . . 5

AC Power Termnals. . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Battery Connect on. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Aux lary Power Term nals - AUX+ and GND . . . . . . . . 5

Bell Output Term nals - BELL+ and BELL-. . . . . . . . . . 5

Keybus Term nals - RED, BLK, YEL, GRN. . . . . . . . . . 6

Programmable Outputs - PGM1 to PGM4 . . . . . . . . . . 6

Zone Input Termnals - Z1 to Z8. . . . . . . . . . . . . . . . . . 6

Telephone Connect on Term nals - TIP,RING,T-1,R-1. 6

2.3 W re Routng for Power & Non-Power L m ted . . . . . . . 6

2.4 Keybus Operat on and W r ng . . . . . . . . . . . . . . . . . . . 6

2.5 Current Rat ngs - Modules & Accessores . . . . . . . . . .6

PC1616/PC1832/PC1864 Dev ce Ratngs. . . . . . . . . . 7

System Output Ratngs . . . . . . . . . . . . . . . . . . . . . . . . 7

2.6 Ass gnng Zones to Zone Expanders . . . . . . . . . . . . . .7

2.7 Keypad Ass gnment . . . . . . . . . . . . . . . . . . . . . . . . . . .7

How to Ass gn Keypads. . . . . . . . . . . . . . . . . . . . . . . . 7

Funct on Key Programm ng. . . . . . . . . . . . . . . . . . . . . 8

2.8 Conf rmng Module Superv s on . . . . . . . . . . . . . . . . . .8

2.9 Remov ng Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

2.10 Zone W r ng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Burglary Zone W r ng Chart. . . . . . . . . . . . . . . . . . . . . 8

Normally Closed (NC) Loops. . . . . . . . . . . . . . . . . . . . 8

S ngle End Of Lne (EOL) Res stors . . . . . . . . . . . . . . 9

Double End of L ne (DEOL) Resstors. . . . . . . . . . . . . 9

F re Zone Wr ng - 4-wre Smoke Detectors. . . . . . . . . 9

Compat ble 4-Wre Smoke Detectors . . . . . . . . . . . . . 9

F re Zone Wr ng - 2-wre Smoke Detectors. . . . . . . . . 9

Compat ble 2-Wre Smoke Detectors . . . . . . . . . . . . 10

2-W re Smoke Detector In tatng C rcu t. . . . . . . . . . . 10

Keysw tch Zone Wr ng . . . . . . . . . . . . . . . . . . . . . . . 10

2.11 Keypad Zone/PGM . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Ass gn ng Keypad Zones. . . . . . . . . . . . . . . . . . . . . . 10

2.12 Zone Actv ty Log . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Secti n 3: H w t Pr gram 11

3.1 How to Enter Installer Programmng . . . . . . . . . . . . . .11

LED Keypad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

LCD Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

3.2 Programm ng Dec mal Data . . . . . . . . . . . . . . . . . . . .11

3.3 Programm ng Hexadecmal Data . . . . . . . . . . . . . . . .11

3.4 Programm ng Toggle Opt ons . . . . . . . . . . . . . . . . . . .11

3.5 V ewng Programm ng . . . . . . . . . . . . . . . . . . . . . . . . .11

LED and ICON Keypads . . . . . . . . . . . . . . . . . . . . . . 11

LCD Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Secti n 4: Keypad C mmands 12

4.1 Arm ng and D sarm ng . . . . . . . . . . . . . . . . . . . . . . . .12

Arm ng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Stay and Away Armng . . . . . . . . . . . . . . . . . . . . . . . 12

Stay Armng. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Away Arm ng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

D sarmng. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Event Buffer (Event Log). . . . . . . . . . . . . . . . . . . . . . 13

V ewng the Event Buffer . . . . . . . . . . . . . . . . . . . . . . 13

4.2 [*] Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

[*][1] Zone Bypassng. . . . . . . . . . . . . . . . . . . . . . . . . 13

[*][2] Trouble Dsplay . . . . . . . . . . . . . . . . . . . . . . . . . 13

[*][3] Alarm Memory. . . . . . . . . . . . . . . . . . . . . . . . . . 14

[*][4] Door Chme On/Off . . . . . . . . . . . . . . . . . . . . . . 14

[*][5] Programm ng Access Codes. . . . . . . . . . . . . . . 14

Table of Contents

Installer’s Programm ng - Codes and Optons . . . . . 15

[*][6] User Funct ons. . . . . . . . . . . . . . . . . . . . . . . . . 16

LCD Keypad User Functons . . . . . . . . . . . . . . . . . . 16

[*][7] Command Output Funct ons . . . . . . . . . . . . . . 16

[*][8] Installer Programmng . . . . . . . . . . . . . . . . . . . 16

[*][9] Armng W thout Entry Delay. . . . . . . . . . . . . . . 16

[*][0] Quck Arm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

[*][0] Quck Ex t. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.3 Funct on Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.4 Global and Part ton Keypad Operat on . . . . . . . . . . . 18

4.5 Keypad Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Automat c Scrollng of Open Zones . . . . . . . . . . . . . 18

Automat c Scrollng of Alarms n Memory. . . . . . . . . 18

24 Hour Tme D splay Opt on . . . . . . . . . . . . . . . . . . 18

Keypad Zones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

V ewng Troubles Wh le Armed. . . . . . . . . . . . . . . . . 18

Backl ghtng Boost . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Secti n 5: Pr gramming Secti ns 19

5.1 Keypad Programm ng . . . . . . . . . . . . . . . . . . . . . . . . 19

5.2 Bas c Programmng . . . . . . . . . . . . . . . . . . . . . . . . . . 19

[001]-[004] - Zone Defn tons . . . . . . . . . . . . . . . . . . 19

[005] - System Tmes . . . . . . . . . . . . . . . . . . . . . . . . 21

[006] - Installer’s Code . . . . . . . . . . . . . . . . . . . . . . . 21

I[007] - Master Code. . . . . . . . . . . . . . . . . . . . . . . . . 21

[008] - Ma ntenance Code/Guard Code . . . . . . . . . . 21

[009]-[011] - Programmable Output Opt ons. . . . . . . 21

[012] - Keypad Lockout Opt ons . . . . . . . . . . . . . . . . 24

[013] - Frst System Opt on Codes . . . . . . . . . . . . . . 24

[014] - Second System Opt on Codes . . . . . . . . . . . 25

[015] - Th rd System Opt on Codes . . . . . . . . . . . . . 26

[016] - Fourth System Opt on Codes . . . . . . . . . . . . 27

[017] - Ffth System Opt on Codes . . . . . . . . . . . . . . 27

[018] - Sxth System Opt on Codes. . . . . . . . . . . . . . 28

[019] - Seventh System Opt on Codes . . . . . . . . . . . 29

[020] - Keypad Zone Ass gnment . . . . . . . . . . . . . . . 30

[021] - E ghth System Opt on Codes . . . . . . . . . . . . 30

[023] - Tenth System Opton Codes . . . . . . . . . . . . . 32

[030] - Fast Loop Response . . . . . . . . . . . . . . . . . . . 33

5.3 Advanced Programm ng . . . . . . . . . . . . . . . . . . . . . . 33

[101]-[164] - Zone Attrbutes. . . . . . . . . . . . . . . . . . . 33

[165] - Max mum D al ng Attempts . . . . . . . . . . . . . . 33

[166] - Post Dal Wa t For Handshake . . . . . . . . . . . 33

[167] - T-L nk Commun cat ons Wa t for Acknowledge

Delay. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

[168]-[169] - Daylght Sav ng T me . . . . . . . . . . . . . . 33

[170] - PGM Output Tmer . . . . . . . . . . . . . . . . . . . . 34

[171] - Tamper PGM Output T mer . . . . . . . . . . . . . 34

[172] - Settle Delay Tmer. . . . . . . . . . . . . . . . . . . . . 34

[173] - Bell Delay Tmer . . . . . . . . . . . . . . . . . . . . . . 34

[175] - Auto-arm Postpone T mer . . . . . . . . . . . . . . . 34

[176] - Cross Zone/Pol ce Code T mer . . . . . . . . . . . 34

[178] - For Future Use . . . . . . . . . . . . . . . . . . . . . . . 34

[181]-[188] - Auto-arm Schedules. . . . . . . . . . . . . . . 34

[190] - No Act v ty Arm ng Pre-Alert Durat on . . . . . . 34

[191]-[198] - No-Act v ty T mer (Part t on 1-8) . . . . . . 35

[199] - Auto-armng Pre-Alert T me. . . . . . . . . . . . . . 35

5.4 Part ton & Zone Programm ng . . . . . . . . . . . . . . . . . 35

[201] - Partt on Select on Mask . . . . . . . . . . . . . . . . 35

[202]-[265] - Part ton Zone Ass gnments . . . . . . . . . 35

Part tons and Zone Ass gnment . . . . . . . . . . . . . . . . 35

5.5 Commun cator Programm ng . . . . . . . . . . . . . . . . . . 35

Commun cator - Telephone Numbers . . . . . . . . . . . . 35

[301] - Frst Telephone Number. . . . . . . . . . . . . . . . . 35

[302] - Second Telephone Number . . . . . . . . . . . . . . 35

[303] - Thrd Telephone Number . . . . . . . . . . . . . . . . 35

[304] - Call Wa t ng Cancel D alng Str ng . . . . . . . . . 35

Commun cator - Account Codes . . . . . . . . . . . . . . . . 36

[310] - System Account Code . . . . . . . . . . . . . . . . . . 36

[311]-[318] - Part t on 1-8 Account Codes . . . . . . . . . 36

Report ng Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Commun cator - Report ng Codes . . . . . . . . . . . . . . . 36

[320]-[323] - Alarm Report ng Codes, Zones 1 to 64. 36

[324]-[327] - Alarm Restoral Report ng Codes,

Zones 1 to 64. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

[328] - M scellaneous Alarm Report ng Codes . . . . . 36

[329] - Pr or ty Alarm/Restoral Report ng Codes . . . . 36

[330]-[333] - Tamper Report ng Codes, Zones 1 to 64 36

[334]-[337] - Tamper Report ng Codes, Zones 1 to 64 37

[338] - M scellaneous Tamper Report ng Codes . . . . 37

[339]-[340] - Clos ng (Arm ng) Report ng Codes,

Zones 1-32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

[341] - M scellaneous Clos ng (Arm ng) Report ng

Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

[342]-[343] - Open ng (Dsarm ng) Report ng Codes

Access Codes 1 to 32 . . . . . . . . . . . . . . . . . . . . . . . . 37

[344] - M scellaneous Open ng (D sarm ng) Report ng

Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

[345] - Ma ntenance Alarm Report ng Codes. . . . . . . 37

[346] - Ma ntenance Alarm Report ng Codes. . . . . . . 37

[347] - M scellaneous Ma ntenance Report ng Codes 38

[348] - Test Transm sson Report ng Codes . . . . . . . 38

[349] - PC5700 Ma ntenance Reportng Codes. . . . . 38

[350] - Communcator Format Optons . . . . . . . . . . . 38

Report ng Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Contact ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

SIA (Level 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Res dent al D al . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Pr vate Lne Format . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Pager Format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Pulse Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Scantron cs Format . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Robofon Format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

200 Baud FSK (CESA) . . . . . . . . . . . . . . . . . . . . . . . 40

Telephone L ne Mon torng (TLM) . . . . . . . . . . . . . . . 41

[351]-[376] - Commun cator Call D rect ons. . . . . . . . 41

[377] - Communcat on Var ables. . . . . . . . . . . . . . . . 41

[378] - Test Transm sson T me of Day . . . . . . . . . . . 42

[379] - Perod c DLS T me of Day . . . . . . . . . . . . . . . 42

[380] - F rst Commun cator Opton Codes . . . . . . . . . 42

[381] - Second Commun cator Opt on Codes . . . . . . 43

[382] - Th rd Commun cator Opt on Codes . . . . . . . . 44

5.6 Download ng Opt ons . . . . . . . . . . . . . . . . . . . . . . . . 45

Download ng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

[401] - F rst Download ng Opt on Codes . . . . . . . . . . 45

[402] - Download ng Computer’s Phone Number . . . 46

[403] - Download ng Access Code. . . . . . . . . . . . . . . 46

[404] - Panel Identf caton Code . . . . . . . . . . . . . . . . 46

[405] - Double-Call T mer. . . . . . . . . . . . . . . . . . . . . . 46

[406] - Number of Rngs to Answer On . . . . . . . . . . . 46

[499] - Int ate PC-Lnk Commun cat ons . . . . . . . . . . 46

iii

5.7 Programmable Output Programm ng . . . . . . . . . . . . 46

[501]-[514] - Programmable Output Attr butes . . . . . . 46

Ass gnng Part tons to Programmable Outputs . . . . . 46

[551]-[564] - PGM Partt on Ass gnment. . . . . . . . . . . 47

5.8 Internat onal Programm ng . . . . . . . . . . . . . . . . . . . . 47

[700] - Automat c Clock Adjust. . . . . . . . . . . . . . . . . . 47

[701] - F rst Internat onal Opt on Codes . . . . . . . . . . . 48

[702] - Second Internat onal Opton Codes . . . . . . . . 48

[703] - Delay Between D alng Attempts. . . . . . . . . . . 49

5.9 Module Programmng . . . . . . . . . . . . . . . . . . . . . . . . 49

5.10 Specal Installer Instruct ons . . . . . . . . . . . . . . . . . . . 49

[900] - Panel Vers on . . . . . . . . . . . . . . . . . . . . . . . . . 49

[901] - Installer Walk Test Mode Enable / D sable . . . 49

[902] - Reset Module Superv s on . . . . . . . . . . . . . . . 49

[903] - Module Superv s on Feld . . . . . . . . . . . . . . . . 49

[904] - Module Placement Test . . . . . . . . . . . . . . . . . 50

[906] - For Future Use . . . . . . . . . . . . . . . . . . . . . . . . 50

[989][Installer Code] - Default Master Code. . . . . . . . 50

[990][Installer Code] - Installer Lockout Enable . . . . . 50

[991][Installer Code] - Installer Lockout D sable. . . . . 50

[993]-[999] - Factory Defaults. . . . . . . . . . . . . . . . . . . 50

[993][Installer Code] - Restore Alternate Comm.

Factory Default Programm ng . . . . . . . . . . . . . . . . . . 50

[995][Installer Code] - Restore ESCORT5580(TC)

Factory Default Programm ng . . . . . . . . . . . . . . . . . . 50

[996][Installer Code] - Restore PC5132 W reless

Factory Default Programm ng . . . . . . . . . . . . . . . . . . 50

[997][Installer Code] - Restore PC5400 Factory

Default Programmng . . . . . . . . . . . . . . . . . . . . . . . . . 50

[998][Installer Code] - Restore PC5900 Factory

Default Programmng . . . . . . . . . . . . . . . . . . . . . . . . . 50

[999][Installer Code] - Restore Factory Default

Programm ng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Secti n 6: Fire M nit ring 51

6.1 Partt ons and Fre System Conf gurat on . . . . . . . . . .51

F re Conf gurat on 1. . . . . . . . . . . . . . . . . . . . . . . . . . 51

F re Conf gurat on 2. . . . . . . . . . . . . . . . . . . . . . . . . . 51

6.2 F re Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Standard F re Operat on . . . . . . . . . . . . . . . . . . . . . . 51

Auto Verfy F re . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Four-W re Smoke Detector Zones. . . . . . . . . . . . . . . 51

Two-W re Smoke Detector Zones . . . . . . . . . . . . . . . 52

F re Superv sory Zone. . . . . . . . . . . . . . . . . . . . . . . . 52

6.3 Fre System Operat on . . . . . . . . . . . . . . . . . . . . . . . .52

Manual S gnal S lence. . . . . . . . . . . . . . . . . . . . . . . . 52

Automat c Sgnal S lence (Bell Tme-out) . . . . . . . . . 52

Manual Sensor Reset ([*][7][2]). . . . . . . . . . . . . . . . . 52

Subsequent Alarm Operaton . . . . . . . . . . . . . . . . . . 52

Auto-Scroll LCD Keypad Dsplay. . . . . . . . . . . . . . . . 52

F re Trouble Condt ons. . . . . . . . . . . . . . . . . . . . . . . 52

AC Delays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

F re Report ng Codes . . . . . . . . . . . . . . . . . . . . . . . . 53

Secti n 7: Listing Requirements 54

7.1 UL L sted Commercal and Res dent al Installat ons .54

Appendix A: Reporting Codes . . . . . . . . . . . . . . . . . . . . . .56

Contact ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

SIA Format - Level 2 (Hardcoded). . . . . . . . . . . . . . . 56

Contact ID Zone Alarm/Restoral Event Codes . . . . . 57

SIA Format Automat c Zone Alarm/Restoral Codes . 57

Appendix B: Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . .58

B.1 PC1616/PC1832/PC1864 UL/ULC Wiring Diagram . . . . .58

B.2 PC1616/PC1832/PC1864 Standard Wiring Diagram . . . .59

B.3 PC1616/PC1832/PC1864 Europ an Wiring Diagram . . . .60

B.4 PC1616/PC1832/PC1864 and PC5700 Fir Modul

Communications Conn ctions . . . . . . . . . . . . . . . . . . . . . . .61

B.5 S nsor R s t for 2-Wir Smok D t ctors . . . . . . . . . . . .61

B.6 S nsor R s t for 4-wir Smok D t ctors . . . . . . . . . . . .61

B.7 Oth r PGM Conn ctions . . . . . . . . . . . . . . . . . . . . . . . . .61

The below symbols are used to nd cate features that are only avalable n a part cular market. No symbol

ndcates the feature s avalable for all markets.

Europe Italy Un ted States Un ted K ngdom Scandnav a

EN IMQ

CP-

1.1 Ab ut the PC1616/PC1832/PC1864 System

Th s product s n conform ty w th EMC Drect ve 89/336/EEC

based on results usng harmon zed standards n accordance

w th art cle 10(5), R&TTE D rect ve 1999/5/EC based on follow-

ng Annex III of the d rectve and LVD D rect ve 73/23/EEC as

amended by 93/68/EEC based on results usng harmon zed

standards.

Th s product meets the requ rements of Class II, Grade 2 equ p-

ment as per EN 50131-1:2004 Standard. Th s product s su t-

able for use n systems wth the followng not f cat on optons:

• A (use of two warn ng dev ces and nternal d aler

requ red),

• B (self powered warn ng devce and nternal d aler

requ red),

• D (use of DSC model T-L nk TL250 encrypted Ethernet

communcator requ red).

The PC1616/PC1832/PC1864 are hgh end securty sys-

tems. Below are the lst of features for each panel:

The LCD keypad gu des users through the r ava lable

opt ons w th easy-to-understand prompts.

The status of the PC1616/PC1832/PC1864 system can be

montored over telephone l nes, or us ng an alternat ve com-

muncat ng dev ce, nclud ng Skyroute™, T-LINK, GS-3050

and DVACS.

You can program the PC1616/PC1832/PC1864 us ng any

system keypad, or us ng DLS downloadng software and a

computer (see secton 3, ‘How to Program’).

Rev ew the complete manual set before nstall ng the

PC1616/PC1832/PC1864 securty system.

1.2 Ab ut the PC1616/PC1832/PC1864 Manual Set

Reference Manual

Ths manual provdes:

• An overv ew of the system (Sect on 1: “Introduct on”)

• How to nstall and wre the system and ts modules (Sec-

t on 2: “Installat on and W r ng”)

• How to program the system (Sect on 3: “How to Pro-

gram”)

• An ntroduct on to the user nterface and keypad opera-

t on (Secton 4: “Keypad Commands”)

• An overv ew of the ma n system programm ng sect ons

(Section 5: “Programmng Sect ons”).

Installati n Guide

The Installat on Gude provdes the bas c nstallaton, w rng

and programmng nformat on requ red to program the Pow-

erSer es PC1616, PC1832 and PC1864 control panels.

Pr gramming W rksheets

The Programmng Worksheets provd a detaled l st of all

programmng sect ons avalable n the panel and a place to

record your programm ng. Be sure to record all your system

programmng n the Programming Worksheets. If add ng

modules to your PowerSer es Control Panel, refer to the

Installation Instructions that come w th each module.

User Guide

One user gude comes wth the PC1616/PC1832/PC1864

system. The User’s Guide prov des easy to follow nstruc-

tons for end users. Installers should also revew ths manual,

n order to properly nstruct the end-users once the nstalla-

ton s complete.

1.3 C ntr l and Indicating Equipment Specificati ns

Z ne C nfigurati n

• 6 Fully programmable zones (PC1616)

• 8 Fully programmable zones (PC1832/PC1864)

• 34 zone types, 9 programmable zone attr butes

• Zone conf gurat ons ava lable: Normally closed, S ngle

EOL and Double EOL zone superv s on

• Hardw red zone expans on (fully superv sed) avalable

us ng the Model PC5108 (e ght Zone Expander Module)

and the Model PC5700 (F re Module)

• Expandable to 16 zones (PC1616)

• Expandable to 32 zones (PC1832)

• Expandable to 64 zones (PC1864)

• One zone nput ava lable on the keypads

• Wreless zone expans on (fully superv sed) ava lable

us ng the Model PC5132 (RF Recever, operat ng at

433MHz)

NOTE: PC1616 expandable to 16 zones only.

• Up to 2 part t ons (PC1616)

• Up to 4 part t ons (PC1832)

• Up to 8 part t ons (PC1864)

Access C des

• 39 access codes:

• 32 User Codes (Level 2)

• 1 System Master Code (Level 3)

• 2 Superv sor Codes

• 2 Duress Codes

• 1 Ma ntenance/Guard Code

• 1 Installer Code (Level 3)

• Programmable attr butes for each user code (see sec-

tion 4. for detals)

• 1,000,000 access code var at ons (us ng 6-d gt codes)

• Duress codes der ved from user codes plus 1 d g t are

not allowed

Section 1: Introduction

PC1616 PC1832 PC1864

On-board Zones 6 8 8

Hardw red Zones 16 (1xPC5108) 32(3xPC5108) 64 (7xPC5108)

W reless Zones 16 32 32

Keypad Zone

Support 888

On-board PGM

Outputs PGM 1 - 50mA

PGM 2 - 300mA PGM 1 - 50mA

PGM 2 - 300mA PGM 1/3/4 - 50mA

PGM 2 - 300mA

Add t onal PGM

Outputs PC5208 - 8x50mA

PC5204 - 4x500mA PC5208 - 8x50mA

PC5204 - 4x500mA

Keypads 8 8 8

Part t ons 2 4 8

User Codes 32 + Master Codes 32 + Master Codes 32 + Master Codes

Event Buffer 500 Events 500 Events 500 Events

Transformer

Requ red 16.5VAC

40VA 16.5VAC

40VA

Battery Requ red 4Ah / 7Ah / 14Ah 4Ah / 7Ah / 14Ah 4Ah / 7Ah / 14Ah

Bell Output 12V 700 mA

(cont nuous) 12V 700 mA

(cont nuous)

Warning Device utput

• Rated 12VDC, 700mA, (current l m t 2.0A) superv sed

(EOL res stor shall be used)

• Programmable as steady, pulsed or temporal three (as

per ISO 8201) output

• F re alarm not f cat on has pr or ty over burglary alarm

not f cat on

Mem ry

• CMOS EEPROM memory

• Reta ns programm ng and system status on AC and bat-

tery fa lure

• Data Retent on: 200 years m n.

Pr grammable Outputs (PGMs)

• Up to 14 programmable outputs (PGM) w th 21 opt ons

• PGM outputs are open collector type and sw tched to

ground

• Three low current (50mA) PGM outputs on ma n panel

(PGM1, PGM3, PGM4)

NOTE: PGM3 and PGM4 available on PC1864 only.

• One h gh current (300mA) output w th 2-w re smoke

detector capab l ty on the ma n control board (PGM2)

• E ght add t onal low current outputs (50mA) avalable

us ng the Model PC5208

• Four h gh current outputs (1A) ava lable usng the Model

PC5204 (one conf gurable as a superv sed bell output)

P wer Supply

• 1.5A regulated (1.7A for UL/ULC), superv sed and nte-

gral to the control un t

• Type A as per EN50131-6 Standard

• Input ratngs: 120V, 60Hz Class II (220V-240Vac, 50/

60Hz, 200mA for European nstallat ons)

• Transformer requ red, mounted n the same enclosure,

permanently connected for European nstallat ons

• Transformer secondary rat ngs: 16.5Vac, 40VA m n

• AUX Output Voltage: 12VDC, -15%/+10% when AC Input

Voltage s 85% to +110% of rated value and output cur-

rent s 500mA (700mA for UL/ULC) (550mA for IMQ)

• Output r pple voltage: 270mVp-p max.

• Storage dev ce: Rechargeable battery, rated 12VDC

• Battery capac ty: 4Ah, 7Ah, 14Ah (2 x 7Ah) or 24 Ah (2 x

12Ah)

• Battery = One 12V 4Ah battery (For burglary applcatons)

• Battery = Two 12V 7Ah (m n.) rechargeable sealed lead

acd for 24-hr backup (For fre montor ng appl cat ons)

• Max mum standby t me 24Ah (when us ng 14Ah battery

capac ty and AUX current lm ted to 480mA max.).

• Recharg ng t me 48h

• Programmable recharg ng current: Low 400mA, H gh

700mA

• Low battery trouble nd cat on threshold 11.5VDC

• Battery deep d scharge protect on (cut-off at 9.5VDC)

• Ma n board current draw: 85mA (set and unset state)

• Resettable fuses (PTC) used on c rcu t board nstead of

replaceable fuses

• Superv s on for loss of pr mary power source (AC Fa l),

battery fal or battery low voltage (Battery Trouble) w th

ndcat on provded on the keypad

• Internal clock locked to AC power frequency

Operating Envir nmental C nditi ns

• Temperature range: -10°C to +55°C (14°F to 131°F)

• Relat ve hum dty: 93% non condens ng

Keypad Specificati ns

• Each keypad has 5 fully programmable funct on keys

(see Sect on [000] n the programm ng secton.

• “T” vers on keypads have tamper protecton

• Connect up to 8 keypads

• Four w re (Quad) connect on to Keybus

• Bu lt n p ezoelectr c buzzer

Alarm Transmitter Equipment (ATE) Specificati n

• Dg tal d aler ntegral to the ma n control board

• Compl es w th TS103 021-1, -2, -3 Telecom equ pment

requ rements

• Supports the follow ng commun catons formats:

• 10 BPS/20 BPS

• DTMF Contact ID

•SIA FSK

• Pager

• Resdent al D al

• Pr vate L ne

• Scantron cs 4-8-1

• Robofon

• CESA 200

• Splt report ng of selected transm ssons to each tele-

phone number

• 3 programmable telephone numbers

• 1 system account number

• Upto 8 part t on account numbers

• Supports Skyroute™ Cellemetry Commun cat on Trans-

ce ver

• GS3050 GSM Un versal W reless Alarm Commun cator

• DTMF and pulse dal ng

• DPDT l ne se zure

• Ant-jam detect on

• Event- n tated personal pag ng

• T-L nk/T-L nk TL250/T-L nk TL300 Ethernet Commun ca-

t ons (usng PC-L nk) for Intranet/Internet connect v ty.

System Supervisi n Features

The PC1616/PC1832/PC1864 contnuously montors a num-

ber of poss ble trouble cond tons and provdes aud ble and

v sual ndcat on at the keypad. Multple sgnals are nd cated

usng scroll buttons on the LCD keypads (no pr orty

assgned) or by d fferent l ghts on the LED’s keypads. Trou-

ble Cond tons nclude:

• AC Power Falure

• Low Battery Cond t on

• AUX Power Supply Fault

• Bell Output Trouble

• Telephone L ne Trouble

• Falure to Commun cate

• Loss of Internal Clock

• Module Fault (Superv sory or Tamper)

• Trouble by Zone

• F re Trouble

• Tamper by Zone

False Alarm Preventi n Features

• Aud ble Ex t Delay

• Aud ble Ex t Fault

• Urgency on Entry Delay

• Qu ck Ex t

• Swnger Shutdown

• Recent Clos ng Report ng Code

• Cross Zone/Pol ce Code Alarm

• Burglary-Ver f ed T mer

• Commun caton Delay

• Rotat ng Keypress Buffer

Additi nal Features

• Automat c nh bt (swnger shutdown) for Alarm, Tamper,

Trouble s gnals after 3 occurrences n a g ven set per od

(see sect on [377]), Opt [1] alarms, [2] tampers, [3] trou-

bles.

• Programmable keypad lockout opt on (see sect on [012])

• Automat c arm ng by part t on at a spec f ed t me, each

day of the week

• No act v ty arm ng

• Keypad actvated alarm output and commun cator test

• Keypad lockout

• Aud o capab l ty us ng the PC5900 Aud o Ver f cat on

Module and central stat on 2-way l sten- n

• All modules connect to the system v a a 4-w re Keybus,

up to 1000’/305m from the ma n panel

• Event buffer can be pr nted us ng PC5400/PC5401 RS-

232 Ser al Interface module

• Supports the Escort5580(TC) Vo ce Prompt Module,

w th automat on and l ghtng control

• 500 event buffer, t me and date stamped

• Upload ng/downloadng capab lty

• Dayl ght savngs t me opt on

1.4 Additi nal Devices

If a Fault or Tamper cond t on occurs on a zone wh le the

system s dsarmed, a trouble condt on wll be ndcated. If a

Fault or Tamper cond t on occurs on a zone wh le the system

s armed, the bell wll be sounded. Th s appl es to zones and

zone expander modules, and cannot be changed. Th s fea-

ture wll be actve for the followng modules:

• PC5108

• PC5700

• PC5132

• PK55XX wth a zone programmed

• RFK55XX wth a zone programmed

Keypads

A maxmum of 8 keypads can be connected to the control

panel. You can connect any comb naton of the follow ng

lsted.

• PK5500/RFK5500 LCD keypad

• PK5501/RFK5501 ICON keypad

• PK5508/RFK5508 8 Zone LED keypad

• PK5516/RFK5516 16 Zone LED keypad

• LCD5511 F xed Message LCD keypad

• LED5511Z 8 Zone LED keypad

• PC5508Z 8 Zone LED keypad

• PC5532Z 32 Zone LED keypad

• PC5516Z 16 Zone LED keypad

• LCD5500Z L qud Crystal D splay (LCD) keypad

• LCD5501Z LCD-style keypad

PC5100 2-Wire Addressable Interface M dule

The PC5100 module s used to connect 2-wre addressable

devces to the system. Up to 32 2-w re addressable dev ces

can be added to the system.

NOTE: PC5100 v1.0 and lower mod les can only s pport the

first 32 zones on the PC1616/PC1832/PC1864 system.

NOTE: PC1616 expandable to 16 zones only.

PC5108 Eight Z ne Expander M dule

E ght zone expander module can be used to ncrease the

number of zones on the system. Up to 7 modules can be

connected to ncrease the system zones to a maxmum of 64

(see the PC5108 Installation Instruction Sheet.)

NOTE: PC5108 v1.0 and lower mod les can only s pport the

first 32 zones on the PC1616/PC1832/PC1864 system. PC5108

v1.0 and lower mod les enroll as two mod les and se p

two s pervisory slots.

NOTE: Do not mix PC5108 v1.x and lower mod les with

PC5108 v2.0 and higher mod les on the same system.

NOTE: PC1616 expandable to 16 zones only. The PC1832

expandable to 32 zones only.

PC5132 Wireless Receiver M dule

The PC5132 W reless Recever module can be used to con-

nect up to 32 fully superv sed wreless dev ces (see the

PC5132 Installation Manual for details).

NOTE: Only the first 32 zones on the PC1616/PC1832/PC1864

system can be sed as wireless zones.

NOTE: PC1616 expandable to 16 zones only.

PC5200 P wer Supply Output M dule

The PC5200 can provde up to 1 Amp of addt onal power for

modules or devces connected to the control panel. Up to 4

modules can be connected to the system. Each module

requres a 16.5VAC 40VA transformer and 4 AH battery (see

PC5200 Installation Instructions for details).

PC5204 P wer Supply Output M dule

The PC5204 can provde up to 1 Amp of addt onal power for

modules or dev ces connected to the control panel. The

module requres a 16.5VAC 40VA transformer and 4Ah(m n.)

battery. In addt on, the module prov des 4 programmable

hgh current outputs (see PC5204 Installation Instructions for

details).

PC5208 Eight L w Current Output M dule

Adds 8 programmable low current outputs (50mA) to the

control (see the PC5208 Installation Instructions for details).

NOTE: If yo se the main panel and the PC5208 o tp ts,

PGM 3 will work the same as the first PC5208 o tp t, and

PGM 4 will work the same as the second PC5208 o tp t.

Esc rt5580(TC) M dule

Ths Escort5580(TC) module w ll turn any touch-tone tele-

phone nto a fully functonal keypad. The module also

ncludes a bult- n nterface to control up to 32 powerl ne car-

r er type dev ces for lghtng and temperature control (see the

Escort5580( C) Installation Manual for details).

NOTE: An Escort5580(TC) version 3.x or higher is needed to

s pport more than 32 zones and/or 2 partitions.

PC5900 Audi Verificati n M dule

The PC5900 ser es Audo Ver fcaton Modules prov de "Talk/

Lsten-In" capabl ty for aud o ver fcat on of alarms. The

module perm ts the central stat on to mon tor up to four

m crophones and to communcate to the occupants through

2 separate speakers.

PC5400 Printer M dule

Ths PC5400 Pr nter Module allows the panel to pr nt all

events on the system to any ser al pr nter. All events w ll be

pr nted w th the part ton, t me, date and the event that

occurred (see PC5400 Installation Manual for details).

NOTE: The PC5400 v2.x and lower only s pports events on

partitions 1 and 2, and zones 1-32.

PC5401 Serial Interface M dule

The PC5401 Ser al Interface Module can be used to commu-

ncate w th 3’rd party devces (automat on) through a stan-

dard RS-232 seral connecton (see the PC5401 Developer’s

Gude for more nformaton on communcat ng w th the

PC5401 module).

T-Link L cal Area Netw rk C mmunicat r

The T-Lnk Local Area Network Communcator provdes an

effc ent method of commun catng v a a Local Area Network

(LAN). See the T-L nk Installation Manual for more detals.

TL250/TL300 Intranet/Internet C mmunicat rs

The T-L nk Ethernet Commun cator provdes an eff c ent

method of commun cat ng v a Internet/Intranet. See the T-

Lnk TL250/TL300- Installation Manual for more detals.

Alternate C mmunicat rs

Refer to the assocated Skyroute™ Installat on Manual, or

GS3050 Installaton Manual for programmng detals.

PC5700/PC5720 Fire M dule

Ths s a zone expans on f re module that can be used for

ULC Lsted non-resdental fre applcat ons. The PC5720

can be used as an nterface between the control panel and

e ther a ser al pr nter or a DVACs communcat on network.

NOTE: The PC5700/PC5720 enroll as two expander mod les

and se two s pervisory slots each.

NOTE: Do not mix PC5700 v1.x and lower mod les with

PC5108 v2.0 and higher mod les on the same system.

Encl sures/Cabinets

The PC1616/PC1832/PC1864 ma n board can be nstalled

n the followng metal enclosures/cab nets:

Accessor es can be nstalled n separate metal enclosures

as follows:

All cab nets are provded wth means for nstall ng tamper

protecton sw tch (door open ng detect on and/or removal

from the mountng pos ton).

1.5 Battery Standby Times versus AUX L ad

In accordance w th EN50131-1 Standard, for a Power Sup-

ply Type A rated for Grade 2 systems, the battery standby

tme requred n case of falure of the pr me power source

shall be a mn mum of 12 hours.

The table below ndcates the max mum load values applca-

ble to the AUX+/-, Keybus (Red, Black) and PGM 1-4 outputs

that the panel (PC1616/PC1832/PC1864) wll be able to

support when us ng a certa n battery sze for a certa n per od

of tme as appl cable for each nstallaton.

The AUX +/-, Keybus (Red, Blk) and PGM 1-4 outputs are all

shar ng the same load (max. 500mA), (max. 700mA for UL/

ULC), (max. 550mA for IMQ). Please refer to the other

Power Ser es accessor es current ratngs when calculatng

the maxmum load applcable for each nstallat on.

Standard Battery Chargng Current: 400mA (280mA for

IMQ).To be used wth 4Ah or 7Ah batter es.

Hgh Battery Charg ng Current: 700mA. To be used wth

14Ah or 24Ah batter es.

NOTE: Program Section [701] option 7 to ON to enable high

battery charging c rrent, if 14Ah or 24Ah battery is sed.

Refer to the followng table for UL/ULC Applcatons:

NOTE: When two batteries are req ired in order to meet

the minim m standby times, the DSC Enclos re Model Power

UC1 shall be sed.

NOTE: A sealed, rechargeable, lead acid battery or gel type

battery is req ired to meet UL req irements for power

standby times.

NOTE: UL Residential/Commercial B rglary installations

req ire 4Hrs Power Standby time.

NOTE: UL/ULC Residential Fire & Home Care installations

req ire 24 Hr power standby. ULC Commercial B rglary and

Fire monitoring installations req ire 24 Hr power standby.

NOTE: Replace batteries every 3-5 years.

NOTE: Battery capacity will deteriorate with age and n m-

ber of charge/discharge cycles.

Enclosure Descr pt on/D mens ons

PC500C Descripti n: Alternate Ma n Control Cab net (House-

hold Burglary).

Appr ximate Dimensi ns: 213mm x 235mm x 76mm /

8.4” x 9.25” x 3.0”

PC5002C Descripti n: Cabnet to house the PC5204 Power Sup-

ply Output Module.

Appr ximate Dimensi ns: 213mm x 235mm x 76mm /

8.4” x 9.25” x 3.0”

PC5003C

(Rem vable

D r)

Descripti n: Man Control Cabnet for the PC1616/

PC1832/PC1864 man panel wth removable door. (UL/

ULC Household Fre & ULC Commerc al Burglary) Made

w th 22Ga steel.

Appr ximate Dimensi ns: 287mm x 297mm x 76mm /

11.3” x 11.7” x 3.0”

PC5003C

(Hinged D r) Descripti n: Man Control Cabnet for the PC1616/

PC1832/PC1864 ma n panel w th removable door. Made

w th 1.2mm th ck steel.

Appr ximate Dimensi ns: 287mm x 297mm x 76mm /

11.3” x 11.7” x 3.0”

PC5004C Descripti n: Cabnet to house the Escort5580(TC)

Module and PC5400 Pr nter Module.

Appr ximate Dimensi ns: 229mm x 178mm x 66mm /

9.0” x 7.0” x 2.6”

PC5001C Descripti n: Cabnet to house the PC5108 Zone

Expander Module and the PC5208 Eght Low Current

Output Module.

Appr ximate Dimensi ns: 152mm x 122mm x 38mm /

6.0” x 4.8” x 1.5”

PC5001CP Descripti n: Plast c Cabnet to house the PC5108 Zone

Expander Module and the PC5208 Eght Low Current

Output Module.

Appr ximate Dimensi ns: 146mm x 107mm x 25mm /

5.75” x 4.2” x 1.0”

PUC-1 Descripti n: Man control cab net for the PowerSer es

panel. Made wth 18Ga steel.

Appr ximate Dimensi ns: 318mm x 318mm x 102mm

/ 12.5” x 12.5” x 4.0”

CMC-1 Descripti n: Alternate Ma n Control Cab net (Commer-

c al Burglary)

Appr ximate Dimensi ns: 287mm x 297mm x 76mm /

11.3” x 11.7” x 3.0”

Multi-3 Descripti n: Cab net to house the PC5937.

Appr ximate Dimensi ns: 287mm x 297mm x 76mm /

11.3” x 11.7” x 3.0”

HS-CAB1000B Descripti n: Structured wr ng cab net for PC1616/

PC1832/PC1864 man panel, wth a w re raceway n the

center of the cab net.

Appr ximate Dimensi ns: 362mm x 362mm x 102mm

/ 14.25” x 14.25” x 4.0”

Appr ximate Dimensi ns f C ver: 389mm x 389mm

/ 15.3” x 15.3”.

HS-CAB3000LDR Descripti n: Structured w r ng cabnet for PC1616/

PC1832/PC1864 man panel, wth a w re raceway n the

center of the cab net.

Appr xmiate Dimensi ns: 724mm x 362mm x 102mm

/ 28.5” x 14.25” x 4.0”

Appr ximate Dimensi ns f C ver: 752mm x 389mm

/ 29.6” x 15.3”.

HS-CAB4000LDR Descripti n: Structured w r ng cabnet for PC1616/

PC1832/PC1864 man panel, wth a w re raceway n the

center of the cab net.

Appr ximate Dimensi ns: 1086mm x 362mm x

102mm / 42.75” x 14.25” x 4.0”

PC4050C Descripti n: Alternate Ma n Control Cab net (UL/ULC

Household F re & ULC Commercal Burglary) for the

PC1616/PC1832/PC1864 ma n panel.

Appr ximate Dimensi ns: 305mm x 376mm x 124mm

/ 12.0” x 14.8” x 4.9”

PC4050CR Descripti n: Alternate Ma n Control Cab net (UL Com-

merc al F re) for the PC1616/PC1832/PC1864 man

panel.

Appr ximate Dimensi ns: 305mm x 376mm x 124mm

/ 12.0” x 14.8” x 4.9”

PC4050CAR Descripti n: Alternate Ma n Control Cab net (ULC

Commerc al Burglary) for the PC1616/PC1832/PC1864

ma n panel.

Appr ximate Dimensi ns: 305mm x 376mm x 124mm

/ 12.0” x 14.8” x 4.9”

Enclosure Descr pt on/D mens ons

PC4003C Descripti n: S ngle expander cab net made of 18Ga

steel, panted, h nged door, we ght: 1050g.

Appr ximate Dimensi ns: 229mm x 178mm x 64mm /

9.0” x 7.0” x 2.5”

PC4051C Descripti n: Cab net made of 18Ga steel, pa nted,

h nged door, we ght: 3600g.

Appr ximate Dimensi ns: 427mm x 264mm x 106mm

/ 16.8” x 10.4” x 4.18”

Battery

Capacity

Standby Times

4hrs 12hrs 24hrs 36hrs

4Ah 500mA 220mA - -

7Ah 500mA 480mA 150mA -

14Ah - 500mA 480mA 280mA

24Ah - - 500mA 500mA

Battery

Capacity

Standby Times (UL/ULC)

4hrs 24hrs

4Ah 700mA -

7Ah 700mA 180mA

14Ah (2x7Ah n parallel) 700mA 470mA

The followng sect on prov des a descrpt on of how to w re and confgure dev ces and zones.

2.1 Installati n Steps

The follow ng steps are provded to assst w th the nstalla-

ton of the panel. It s suggested that you read over th s sec-

ton br efly to get an overall understand ng of the order of

nstallat on. Once th s s done carefully work through each

step. Workng from th s plan w ll help reduce problems and

reduce the overall nstallat on t me requred.

Step 1 Create a Lay ut

Draw a rough sketch of the buldng and nclude all alarm

detecton devces, zone expanders, keypads and all other

modules that are requred.

Step 2 M unting the Panel

Locate the panel n a dry area, preferably located near an

unsw tched AC power source and the ncomng telephone

l ne. Before attach ng the cab net to the wall be sure to press

the f ve crcu t board mount ng studs nto the cab net from the

back.

NOTE: Complete all wiring before applying AC or connect-

ing the battery.

Step 3 Wiring the Keybus

W re the Keybus to each of the modules follow ng the gu de-

l nes prov ded n Secton 2.4.

Step 4 Assigning Z nes t Z ne Expanders

If zone expander modules are be ng used the modules must

be conf gured so the panel knows whch zones are ass gned

to each expander. Follow the gu del ne prov ded n Sect on

2.6 to ass gn zones to expanders.

Step 5 Z ne Wiring

Power down the control panel and complete all zone w r ng.

Follow the gudelnes prov ded n secton 2.10 to connect

zones usng normally closed loops, sngle EOL resstor, dou-

ble EOL resstors, Fre zones and Keyswtch Armng zones.

Step 6 C mpleting Wiring

Complete all other w r ng ncludng bells or s rens, telephone

l ne connectons, ground connectons or any other w r ng

necessary. Follow the gudelnes prov ded n secton 2.2 “Ter-

m nal Descr ptons”.

Step 7 P wer up the C ntr l Panel

Once all zone and Keybus w r ng s complete, power up the

control panel.

NOTE: The panel will not power p if only the battery is con-

nected.

Step 8 Keypad Assignment

Keypads must be ass gned to d fferent slots to be properly

superv sed. Follow the gu del ne provded n secton 2.7 to

ass gn keypads.

Step 9 C nfirming M dule Supervisi n

By default, all modules are superv sed upon nstallaton.

Superv son s enabled at all t mes so that the panel can nd-

cate a trouble f a module s removed from the system.

To confrm that each module s properly superv sed, follow

the gudel nes prov ded n secton 2.8.

Step 10 Pr gramming the System

Sect on 4.0 prov des a complete descr pton of how to pro-

gram the panel. Sect on 5.0 contans complete descr ptons

of the varous programmable features, what opt ons are

avalable and how the optons funct on. The Programmng

Worksheets should be f lled out completely before attempt-

ng to program the system.

Step 11 Testing the System

Test the panel completely to ensure that all features and

functons are operatng as programmed.

2.2 Terminal Descripti ns

AC Power Terminals

The panel requ res a 16.5V, 40VA transformer. Connect the

transformer to these term nals.

The panel can be programmed to accept a power lne fre-

quency of e ther 50Hz AC or 60Hz AC n programmng sec-

ton [701], opt on [1].

NOTE: Do not connect the transformer ntil all other wiring

is complete.

Battery C nnecti n

The battery s used to provde back up power n the event of

an AC power fa lure and to prov de add t onal current when

the panel demands exceed the power output of the trans-

former, such as when the panel s n alarm.

NOTE: Do not connect the battery ntil all other wiring is

complete.

Connect the RED battery lead to the pos tve of the battery,

the BLACK battery lead to the negat ve.

The High Current Charge/Standard Battery Charge

opton (sect on [701], opt on [7]) allows you to choose

between a hgh current battery charge and the standard bat-

tery charge rate.

High Curr nt/Standard Batt ry Charg . . . . . . . . .S ction [701]: [7]

Auxiliary P wer Terminals - AUX+ and GND

These term nals provde up to 500mA of current at 12 VDC

(700mA of current at 12VDC for UL/ULC) (550mA of current

at 12VDC for IMQ) for devces requ r ng power (rated 11.6-

12.6 VDC f r UL residential applicati ns). Connect the

post ve s de of any devce requ r ng power to the AUX+ ter-

mnal, the negat ve s de to GND. The AUX output s pro-

tected; f too much current s drawn from these term nals

(wr ng short) the panel w ll temporar ly shut off the output,

untl the problem s corrected.

NOTE: When sing a 12V 14Ah battery, the maxim m AUX

capacity for 24-ho r standby is 470mA.

Bell Output Terminals - BELL+ and BELL-

These term nals provde up to 2A of current at 12VDC (w th

standby battery; 700 mA cont nuous) for power ng bells,

s rens, strobes or other warn ng type equ pment. Connect

the pos tve s de of any alarm warn ng devce to BELL+, the

negat ve s de to BELL–. The BELL output s protected; f too

much current s drawn from these term nals (wr ng short)

the BELL PTC w ll open.

The Bell output s superv sed. If no alarm warn ng devce s

be ng used connect a 1KΩ resstor across BELL+ and

BELL– to prevent the panel from d splay ng a Bell Trouble

cond t on.

NOTE: The Bell o tp t is c rrent limited with a 2A PTC.

NOTE: Steady, P lsed and Temporal Three Pattern alarms

are s pported.

Section 2: Installation and Wiring

Keybus Terminals - RED, BLK, YEL, GRN

The Keybus s used by the panel to communcate w th mod-

ules and by modules to communcate wth the panel. Each

module has four Keybus term nals that must be connected to

the four Keybus term nals on the panel.

Pr grammable Outputs - PGM1 t PGM4

Each PGM output s des gned so that when act vated by the

panel, the term nal wll sw tch to ground

PGM1, PGM3, and PGM4 can each snk up to 50 mA of cur-

rent. These PGMs can be used to act vate LEDs or a small

buzzer. Connect the pos tve s de of the LED or buzzer to

AUX+, the negatve sde to the PGM.

PGM2 s a h gh current output (300mA) and operates s m-

larly to PGM1. If more than 300 mA of current s requred, a

relay must be used. Refer to the d agram. PGM2 can also be

confgured as an nput.

Z ne Input Terminals - Z1 t Z8

Each detecton devce must be connected to a zone term nal

on the system. It s suggested that each zone have one

detecton dev ce however t s possble to w re multple detec-

ton devces to the same zone.

For zone wr ng deta ls, see sect on 2.10 ’Zone W rng’ .

Teleph ne C nnecti n Terminals - TIP,RING,T-1,R-1

If a telephone l ne s requ red for central stat on commun ca-

ton or downloadng, connect an RJ-31X jack n the follow ng

manner:

Connect the PC1616/PC1832/PC1864 and modules that

use the telephone lne(s) n the followng order:

NOTE: Ens re that all pl gs and jacks meet the dimension,

tolerance and metallic plating req irements of 47 C.F.R. Part

68, S bPart F. For proper operation there m st be no other

telephone eq ipment connected between the control panel

and the telephone company facilities.

NOTE: Do not connect the alarm panel comm nicator to

telephone lines intended for se with a FAX machine. These

lines may incorporate a voice filter which disconnects the line

if anything other than FAX signals are detected, res lting in

incomplete transmissions.

2.3 Wire R uting f r P wer & N n-P wer Limited

All w rng entry po nts are desgnated by the arrows. All c r-

cuts are class fed UL nstallat on power l m ted except for

the battery leads wh ch are not power lm ted.

A mn mum ¼” (6.4mm) separaton must be ma ntaned at all

ponts between power l mted and non-power lm ted w rng

and connectons.

NOTE: Wire entry for power limited wiring m st be sepa-

rated by a different entry access from non-power limited wir-

ing.

2.4 Keybus Operati n and Wiring

The Keybus s used by the panel to communcate w th all

modules connected and by the modules to talk to the panel.

The RED and BLK term nals are used to provde power whle

YEL and GRN are clock and data.

The 4 Keybus term nals of the panel must be connected to

the 4 Keybus term nals or w res of all modules.

The followng cond tons apply:

• Keybus should be run w th m nmum 22 gauge quad

(0.5mm), two pa r twsted preferred

• The modules can be home run to the panel, connected n

ser es or can be T-tapped

• Any module can be connected anywhere along the Key-

bus, you do not need a separate Keybus wre run for key-

pads, zone expanders etc.

• No module can be more than 1,000'/305m (n wre length)

from the panel

NOTE: Shielded wire sho ld not be sed for Keyb s wiring.

Example of Keybus Wiring

Module (A) s wred correctly

as t s wth n 1,000'/305m of

the panel, n wre dstance.

Module (B) s wred correctly

as t s wth n 1,000'/305m of

the panel, n wre dstance.

Module (C) s NOT w red cor-

rectly as t s further than

1,000'/305m from the panel, n wre d stance.

2.5 Current Ratings - M dules & Access ries

In order for the PC1616/PC1832/PC1864 system to operate

properly, the power output capab lt es of the ma n control

and expanson dev ces must not be exceeded. Use the data

presented below to ensure that no part of the system s over-

loaded and cannot functon properly.

PC1616

PC18xx PC5900

PC Board

Cab net

Stand Off

Pr mary:120VAC/60Hz.

Secondary: 16.5VDC 40VA

DSCPTD 1640U

Class II Transformer

NOTE:Do not connect

transformer to receptacle

controlled by a swtch

CON1

BAT+BAT-

POWER LIMITED

NON-POWER LIMITED DSC M del BD7-12

r equivalent

Battery

StandbyTime:

24Hrs min.

BLACK

RED

TB-2

AC AC RED BLK YEL GRN Z1 COM Z2 Z3 COM Z4 Z5 COM Z6 Z7 COM Z8

AUX+ BELL+

AUX- BELL- PGM1 PGM3 EGND TIP T-1

PGM2 PGM4 RING R-1

DSC

UA503

Cable Te (not suppl ed) recommended

PC1864

Only PC1864

PC1832

Only

PC1616/1832/1864

HighV ltage. Disc nnect AC P wer

and teleph ne lines bef re servicing

WARNING:

12V / 7 AHr 12V / 7 AHr

N rth America Only

Autres manuels pour PC1616

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Digital Security Controls Système de sécurité

Digital Security Controls

Digital Security Controls WLS9000 Manuel utilisateur

Digital Security Controls

Digital Security Controls PC1616 Manuel utilisateur

Digital Security Controls

Digital Security Controls PC1575 Manuel utilisateur

Digital Security Controls

Digital Security Controls PC585 Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur