CFM Conference Mixer Product Manual
2Copyright © 2009 Digispider. All rights reserved.
www.digispider.net
Thanks for your purchasing CFM conference mixer developed by our company.
Human and high-tech essences are fused in our products. CFM series will give
you one brand-new application experiences.
Please follow the steps to protect your products, work area and personal safety,
in order to avoid the potential danger of damage.
When you are using CFM equipments:
Please follow the steps when you are using CFM equipments,
Warning: Don’t operate CFM equipments when you demount the
covers (including cover, front panel, and back panel and so on).
zPlease make sure the Voltage of the CFM according to local AC voltage
standard, in order to avoid to damage CFM equipments.
--There are 115V/60Hz in most of countries and districts in South America,
North America and Far East, e.g. Japan, Korea and Taiwan.
--There are 230V/50Hz in most of countries in Europe, Middle East and Far
East.
zPlease make sure the electrical outlet is unplugged before interior setup of
CFM equipments, in order to avoid to damage main board of CFM
equipments. Some main boards are electrified still when the equipment is
plugged.
zInstallation and servicing should be performed by qualified and experienced
personnel.
zPlease make sure all the cables of CFM equipments and peripheral
equipment are connected to the correct ground electrical outlets, in order to
avoid electrical shock. All the cables are equipped three-phrase plug to
ensure they are grounded correctly. Don’t use the unidirectional plug and
don’t remove the pins from the cable. Please use three-phrase cable with
correct ground electrical outlet if you need to use extension cords.
zDon’t use CFM equipments in thunderstorm, in order to avoid the potential
risk of electrical shock.
zDon’t connect or disconnect any cable and don’t repair or reconfigure the
product in thunderstorm, in order to avoid the potential risk of electrical
shock.
zPlease make sure the connection of CFM equipments and electrical outlet is
severed before cleaning.
zMake sure that CFM equipment’s power is off when you clean it. Clean your
CFM equipment exterior casing regularly with a soft and dry cloth or a fluff
brush. Do not use liquid or aerosol cleaners which maybe include caustic or
flammable substance.
zWait for a period about ten seconds before severing the connection of
peripheral equipment and CFM equipment, in order to avoid damage to the
system board.
