ATTENTION: the only way to disconnect the decoder from the mains is to remove the power supply
plug from the socket. High voltage is present even when the appliance is in stand-by mode.
Read the manual carefully before starting to use the decoder. Keep the instructions for future reference.
Do not open the appliance, touching the internal components could cause electric shock. Contact with a
voltage of 110-240 V AC can be fatal. Before connecting the decoder to the power supply, make sure that
all connections have been made correctly. Always disconnect the decoder from the power outlet before
connecting or disconnecting cables. Failure to observe these precautions can result in damage, fire or
electric shock, possibly resulting in serious injury!
POWER NETWORK. The purchased model requires a power supply: the user is required to use the one
supplied with the decoder in order to avoid damage to the device itself. The use of a power supply other
than the one supplied will result in the automatic exemption from any liability for the manufacturer
(distributor). Connect to mains power supply AC 220V, 50/60 Hz. Consult your energy manager if you are
unsure of the characteristics of your electrical network. Do not attempt to repair or splice the power cord.
Do not tamper with the power cord or plug. Make sure before use that the power cord is not damaged,
knotted or pinched. It is advisable to disconnect the decoder from the power supply if it is not used for a
long period of time, during thunderstorms or particular phenomena. Never remove the plug from a socket
by pulling on the cable, avoid touching the pins. Do not perform connection or disconnection operations
with wet hands or bare feet. Do not use objects such as levers to remove the plug from an outlet. The
power cord should be protected by a plastic cover to prevent it from being damaged or stepped on.
Immediately disconnect the decoder from the power supply if you notice a smell of burning or smoke:
contact support. The socket must be easily accessible in order to allow quick disconnection of the receiver
in case of need.
OVERLOAD. Do not overload the power outlet, extension cord or adapter, as this may cause a fire or
electric shock. Always use certified standard cables. Do not connect or modify cables while the decoder is
connected to the power supply. Do not use damaged power extension cords - they could cause electric
shock or fire.
LIQUIDS. Do not expose the product to drops or splashes of liquids and do not place any objects with
liquid inside, such as vases or the like, on the apparatus. Do not place in humid places and never touch
with wet or damp hands or during thunderstorms. If a liquid enters the decoder, disconnect it immediately
and contact a technician. Do not touch the device with your hands before it has been disconnected.
CLEANING. Before cleaning the receiver, disconnect the power cord from the outlet. For dusting, always
use a slightly damp cloth (without solvents or detergents).
VENTILATION. Receiver slots should be left uncovered to allow for proper ventilation. Leave enough
space around the appliance to ensure proper ventilation or in close contact with other equipment, to allow
adequate ventilation it is advisable to provide a minimum distance of 10 cm on both sides and 15 cm
above the appliance. The ventilation slots must be free, not obstructed by the presence of objects such as
newspapers, tablecloths, upholstery fabrics, curtains, carpets, etc. Do not place the appliance on carpets
or similar.
OBJECTS. Never insert objects into the slots of the receiver. Falling objects into the unit through the
ventilation slots can cause serious damage. If this happens, disconnect the decoder and contact a
technician.
USE RESERVED FOR ADULTS. The purchased good is a sophisticated electronic device which is
absolutely unsuitable for use by minors. We are not liable for damage to persons and property resulting
from the use of the goods by minors. Keep the appliance out of the reach of children. Plastic bags in
packaging can be dangerous. To avoid suffocation, keep the
