DIGIPDU SMLW 16 Series Manuel utilisateur

RoHS information | BellWin Information

RoHS information

This product complies with RoHS specification.

Safety information

Caution Sign Please read carefully the notes and

instructions in the manual to avoid any personnel injuries or

device damages.

Dangerous Voltage High voltage may exists in this product,

so avoid touching.

Atriangle with flash sign and an arrow inside is to alert users

the presence of uninsulated dangerous voltage within the

product’s enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

Mechanical Grounding

Warning: In order to avoid a fire hazard or risk of electrical shock, do not

expose the product to rain or moisture. Dangerous high voltage exists inside

the device enclosure. Please do not open the enclosure. Only qualified

personnel can perform maintenance of this product.

Important Safety Instructions

1. Please comply strictly with all the alarms and operation instructions in this

manual and on the device, and keep this manual properly. Please do not

operate this device prior to reading all the instructions on safety and

operation.

2.Please set the maximum power-off protection allowed by power circuit as

per the rated current information indicated on the device with reference to

the local state rules, safety procedures and disconnector deviation.

3. The unit can only be connected to a grounded power outlet or system.

4. Make sure the total current output of all the connected systems within the

rated current indicated on the device.

5. Replacement with wrong types of battery may result in explosion, and used

batteries should be disposed as per relevant regulations.

6. The test results of this device may be inaccurate giving instable power

supply.

7. Avoid using this device in places near water or moisture environments.

Warning: In order to avoid a fire hazard or risk of electrical shock, do not

expose the product to rain or moisture.

8. Wipe with cry cloth only.

9. Use the attachments/accessories specified by the manufacturer only.

10. All repairs and maintenances should be performed by qualified personnel.

The unit should be sent to professional personnel for maintenance

whatever damage it has, such as:

-damage of power cord or plug;

- SpilLCD by liquid or items dropping into the device;

- Failures of device due to exposure to rain or moisture, or fall-off.

Notices | BellWin Information

Please do not attempt to maintain this device personally. Open the device

enclosure may expose operators to dangerous voltages or other risks.

Please contact dealers for relevant information.

11. Please avoid any items or liquids entering the device because their contact

with dangerous voltage points or short-circuit parts may cause a fire or

electric shock.

12. For relevant safety signs, please see the device enclosure.

13. Anyone else besides the qualified service personnel shall not adjust or

repair this device.

Notices

The Manufacturer reserves the right to revise and modify the information,

files, and specification forms contained in this manual without giving any notice

in advance. The Manufacturer will not guarantee, express implicitly or explicitly,

or declare legally the content or particularly deny the marketability and

applicability of this product used for a specific purpose. These rules shall also

be applicable to any software sold or authorized by the manufacture

mentioned in this manual.

If the software application was proved to be defected after purchase,

buyers (and non-manufacturers, their deals and buyers) shall assume the

service fees, repair charge, occasional incidents and indirect damages arising

from software defects.

The manufacturer of this device is exempted from the duties of eliminating

radio and/or TV interferences arising from any unauthorized adjustment of this

device, in which users should self-correct such interferences.

The manufacturer is free from any damages arising from incorrect setting

of operation voltage. Users are required to make sure the voltage is correctly

set before use.

Notices

Our factory hereby guarantees to users (buyers) that the product will be

free from any defects due to material or manufacturing technologies within 1

year since being purchased During the warranty period and by virtue of the

purchase proof, our factory will determine the reasons of any failures on its

own to judge if the defect is caused by manufacturing technologies and/or

materials. If so, the defected product or components will be repaired or

replaced without charging any fees for the replaced parts or labor to resume it

to a normal operating state if necessary. Any of the replaced items is of the

functionally equivalent with or even has higher value than the original one, yet

the specific items for such replacement shall be self-determined by the

manufacturer. However, this is not applicable to products with expired warranty,

altered, misused, modified or damaged because of natural disasters or

improper operation.

This warranty will not apply to any defects or discomformity in

product/component due to negligence in installation, use and operation, and/or

improper use by the third party (including but not limited to clients), alteration

without verification with the manufacturer, maintenance inconsistent with the

instructions on the user manual, normal wearing, disassembling, connection of

the product with other incompatible devices or software, change, transfer or

integration of the products with other systems beyond the use purpose

specified by the manufacturer, connection of other incompatible hardware

and/or software with the product, and the virus spread through computer

network, route change, modification or disruption by telecommunication work

staff and/or service provider, maintenance by non-official personnel etc..

If your device is not functioning properly, please contact the service

providers as indicated on the warranty card inside the device package.

Content | BellWin Information

Content

RoHS information............................................................................................................................... 2

Safety information ............................................................................................................................. 2

Important Safety Instructions ............................................................................................................ 3

Notices...............................................................................................................................................4

Content ..............................................................................................................................................6

Chapter 1 Product Introduction.......................................................................................................... 9

1-1 Product Introduction .....................................................................................................................9

1-2 Application scope ..........................................................................................................................9

1-3 Product features ............................................................................................................................9

1-4 System requirements...................................................................................................................10

1-5 Hardware Description ..................................................................................................................11

1-6 Product packaging .......................................................................................................................12

Chapter 2 Hardware installation ...................................................................................................... 13

2-1 Horizontal rack installation ..........................................................................................................13

2-2 Vertical rack installation...............................................................................................................14

2-3 Product installation......................................................................................................................15

Chapter 3 Panel operation ............................................................................................................... 16

3-1 Panel description .........................................................................................................................16

3-2 Panel operation ...........................................................................................................................18

Chapter 4 First Operation................................................................................................................. 20

4-1 Network connection ....................................................................................................................20

4-2 Setup Wizard ...............................................................................................................................20

Language selection.................................................................................................................... 21

Account Setting........................................................................................................................... 21

Host setting ................................................................................................................................. 22

DNS setting................................................................................................................................. 23

Web Server ................................................................................................................................. 24

Time Server Setting ................................................................................................................... 25

Time zone.................................................................................................................................... 26

Time Format................................................................................................................................ 26

Content

Overtime setting ......................................................................................................................... 26

Setting completion...................................................................................................................... 27

4-3 Sign in .......................................................................................................................................... 27

4-4 Main menu .................................................................................................................................. 28

Chapter 5 Monitor ........................................................................................................................... 29

5-1 Peripheral state............................................................................................................................29

Chapter 6 System Setup Menu ......................................................................................................... 31

6-1 Network setting ...........................................................................................................................31

6-2 E-mail server ................................................................................................................................33

6-3 SMS server ...................................................................................................................................35

6-4 SNMP setting ...............................................................................................................................38

6-5 SYSLOG Record.............................................................................................................................41

6-6 IDCView ....................................................................................................................................... 42

6-7 Peripheral Parameters .................................................................................................................44

6-8 Other............................................................................................................................................45

Chapter 7 Firewall menu .................................................................................................................. 46

7-1 IP Filter.........................................................................................................................................46

7-2 MAC filter..................................................................................................................................... 47

Chapter 8 Account Management...................................................................................................... 48

8-1 New User .....................................................................................................................................48

8-2 Outlet Authority...........................................................................................................................49

8-3 Email ............................................................................................................................................ 50

8-4 SMS .............................................................................................................................................. 51

8-5 Modify Account ........................................................................................................................... 52

8-6 Delete Account ............................................................................................................................52

Chapter 9 Time ................................................................................................................................ 53

Chapter 10 Chart Statistics Menu ..................................................................................................... 55

Chapter 11 Event.............................................................................................................................. 56

Chapter 12 Firmware Upgrade ......................................................................................................... 57

12-1 Firmware Upgrade ..................................................................................................................... 57

12-2 Save/Update Profile ................................................................................................................... 59

Chapter 13 IP Search Utility.............................................................................................................. 61

13-1 Windows....................................................................................................................................61

Content | BellWin Information

13-2 Java ............................................................................................................................................63

Appendix ......................................................................................................................................... 65

Set back to factory default values......................................................................................................65

HTTP Message API example ...............................................................................................................66

Message format Explanation:................................................................................................... 68

Product Specification Sheet ...............................................................................................................69

Product Information ..........................................................................................................................72

Magnetic...................................................................................................................................... 72

circuit breakers ........................................................................................................................... 72

Warranty Clause................................................................................................................................. 73

Chapter 1 Product Introduction

1-1 Product Introduction

DigiPDU SMLW series (hereinafter referred to as SMLW series)

consolidates current monitoring, device temperature monitoring, web page

management, message, e-mail, and SNMP functions together to enable MIS

staff to be informed with the power supply, temperature of equipment, and

thereby to remotely deal with the relevant problems through Internet. In this

way, problems can be solved timely, helping to reduce the losses of

enterprises.

SMLW series allows managers to manage hundreds of SMLW series

products at a single interface through IDCView central control software,

accordingly greatly simplifying the issue of device network IP management.

1-2 Application scope

Power monitoring and management of Computer room and rack.

Power monitoring in the computer centers of various organs and units.

Power control of machinery equipment in plants

Power monitoring of network devices

Power monitoring of other power supply devices

1-3 Product features

LCD panel displays current information, max alarm current, device

temperature and network information.

Five sides button provides upper and lower, left and right to see the

information; the middle button can setup parameter.

Support Multi browser (IE, Mozilla, Firefox, Safari, Opera, and

Netscape).

Web page supports 1024-bit SSL security encryption transmission.

Web Page supports multi-national languages.

Provide guidance daemon to ease users' setting of parameters.

User permission divided into system administrator/manager/ordinary

user.

Chapter 1 Product Introduction | BellWin Information

Provide multi-group account numbers so that different users can control

different power switch.

Message and email alerts for real-time detection and alarm of important

devices.

Support to send different messages to different email addresses and

message receivers.

Record operations and warning messages, user can check messages

afterward

Build-in chart to search temperature and other relevance info.

IP and MAC filtering to restrict the operation computer of devices.

SYSLOG support

SNMP (V1/ V2/ V3) and SNMP Trap support.

Support Web API.

Support online firmware upgrade to renew equipment functions.

1-4 System requirements

The computer BIOS connecting to the power outlet should support

Wake on LAN or System after AC Back in order to smoothly turn on the

computer power supply.

Use windows operation system (XP, 2000 and above) in order to safely

shut down the computer.

Safe shut-down program should be instalLCD and executed on the

computer (downloaded from web pages or gain from the software CD

attached with the product) .

Ce manuel convient aux modèles suivants

Table des matières

Manuels Unité de distribution d'énergie populaires d'autres marques

hager

hager SP 015 Manuel utilisateur

Pakedge

Pakedge PowerPak 9 Manuel utilisateur

Pts

Pts 9042 Series Manuel utilisateur

Shure

Shure WA405 Manuel utilisateur

CORNING

CORNING CCH 4U Manuel utilisateur

Panamax

Panamax M4LT-EX Manuel utilisateur

PANCONNECT

PANCONNECT FLAT 3M Manuel utilisateur

Raytheon

Raytheon 138-118 Manuel utilisateur

D&R ELECTRONICS

D&R ELECTRONICS PDU-6SS Manuel utilisateur

Botex

Botex PSA 322-6 DL Manuel utilisateur

GE QuiXtra 4000 Guide de démarrage rapide

RDL

RDL EZ Series Manuel utilisateur

StarTech.com

StarTech.com RKPW161915 Manuel du système

Vertiv

Vertiv Knürr DI-Strip Rack PDU Manuel utilisateur

ABB

ABB PSBS0065 Manuel

Baumuller

Baumuller BFN 3-1-0007-001 Manuel

Eaton

Eaton StructuredWiringSolutions ESWT41600 Manuel

GE GEK-45404F Manuel utilisateur