Digico SD10 Manuel utilisateur

SD10 Operation Manual

0-1

User Manual

UserManualVersionAforSoftwareVersions1.0.415+

SD10 Operation Manual

0-2

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any

language in any form by any means without the written permission of Digico UK Ltd. Information in this manual is subject to

change without notice, and does not represent a commitment on the part of the vendor. Digico UK Ltd shall not be liable for any

loss or damage whatsoever arising from the use of information or any error contained in this manual.

All repair and service of the SD10 product should be undertaken by Digico UK Ltd or its authorised agents. Digico UK Ltd cannot

accept any liability whatsoever for any loss or damage caused by service, maintenance, or repair by unauthorised personnel.

Software License Notice

Your license agreement with Digico UK Ltd, which is included with the SD10 product, specifies the permitted and prohibited uses

of the product. Any unauthorised duplication or use of Digico UK Ltd software, in whole or in part, in print or in any other storage

and retrieval system is prohibited.

Licenses and Trademarks

The SD10 logo and SD10 name are trademarks, and Digico UK Ltd and the Digico UK Ltd logo are registered trademarks of Digico

UK Ltd. Microsoft is a registered trademark and Windows is a trademark of Microsoft Corp.

Digico (UK) Ltd

Unit 10

Silverglade Business Park

Leatherhead Road

Chessington

Surrey

KT9 2QL

England

Telephone: +44 (0)1372 845600

Fax: +44 (0)1372 845656

Email: [email protected]

WWW: http://www.digiconsoles.com

Manual Issue and Date: Issue A - March 2011 - For Version 1.0.415+ Software

Licence Agreement

"Product": SD10 software product produced by Digico UK Ltd intended for use on Target Platform identified below.

"Target Platform": Digico SD10 Digital Console system.

In return for the payment of the one-time fee, the Customer (identified at the end of this Agreement) receives from Digico UK

Ltd a licence to use the Product subject to the following terms and conditions.

1. The Product may be used without time limit by the Customer on the Target Platform.

2. The Customer must register the Product with Digico UK Ltd. Registering the Product is deemed an acceptance of the terms and

conditionsinthisagreement.

3. The Productanditslicence arenot transferable,andtheCustomer isnot permittedtoonward-licenseto anythird party. TheCus-

tomerindemnifies DigicoUK Ltdagainstany andallclaims andactionsarising fromthird partyuseof copiesofthe Productmadeby

theCustomer.

4. TheCustomeragreesnottoattempttodecompiletheobjectcodeoftheProductotherwisethanincircumstancesspecificallyprovided

forbylaw, andthenonly after consultationwithDigico UKLtd.

5. TheCustomeragrees notto use,orlicence theProduct foruse, withequipment otherthan theTarget Platform.

6. TheCustomer agreesnot tomodify theProductwithout theprior writtenconsentof DigicoUK Ltd.

7. ThisAgreementappliestoanyenhancementorupgradesthatmaybecomeavailablefortheProduct.

8. ThisAgreementdoes nottransfer anyright, title,or interest inthe Productto Customerexcept asspecifically setforth herein.

9. DigicoUKLtdreservestherighttoterminatethisAgreementuponbreach,inwhicheventCustomershallthereafteronlybeauthorised

tousetheProducttotheextentthatitscontractualcommitmentstothirdpartiesrequireand thenonlywheresuchcommitmentsrelate

touseoftheProductasauthorisedinthe foregoingprovisionsoftheAgreement.

LIMITED WARRANTY - Digico UK Ltd warrants for a period of 1 year from the date of purchase of the Product, the Product will reason-

ablyexecuteitsprogramminginstructionswhenproperlyinstalledontheTargetPlatform. Inthe eventthatthisProductfailstoexecuteits

programminginstructionsduringthewarrantyperiod,theCustomer'sremedyshallbetoreturnthe ProducttoDigicoUKLtdforreplace-

mentor repairatDigico UKLtdoption. Digico UKLtdmakes nootherexpress warranty,whetherwritten ororalwith respectof this

Product.

LIMITATIONOFLIABILITY-Exceptasotherwiseexpresslyprovidedbylaw,(a)theremediesprovidedabovearetheCustomer'ssole

andexclusiveremediesand(b)DigicoUKLtdshallnotbeliableforanydirect,indirect,special,incidental,orconsequentialdamages

(includinglostprofitwhetherbasedonwarranty,contract,tort,oranyotherlegaltheory.)

ThisagreementismadeundertheLawsof England.

LICENCE NO:..................... ..........................................................

REGISTRATION DATE:..... ..........................................................

SD10 Operation Manual

0-3

Contents

1.1 Introduction .............................................................................. .......1-3

1.2 Manual Overview ..................................................................... .......1-3

1.3 Before You Start ....................................................................... .......1-4

1.3.1 Worksurface Layout .............................................................1-4

1.3.2 Screen Assignment ..............................................................1-5

1.3.3 Layers and Banks.................................................................1-6

1.3.4 Using the Control Surface ...................................................1-6

1.3.5 The Assigned Channel .........................................................1-7

1.3.6 The Master Fader ..................................................................1-7

1.3.7 Other Centre Section Controls ............................................1-8

1.3.8 Channel Types ......................................................................1-8

1.4 Hardware Configuration.......................................................... .......1-9

1.4.1 Connections..........................................................................1-9

1.4.2 Audio I/O Panel....................................................................1-10

1.5 Configuring a Session .......................................................... .......1-13

1.5.1 Session Structure ...............................................................1-13

1.5.2 Assigning Faders to the Worksurface....................... .......1-14

1.6 Saving and Loading Sessions ............................................. .......1-15

1.7 Audio Sync .............................................................................. .......1-16

1.8 Routing Basics ..............................................................................1-17

1.8.1 Selecting Inputs & Outputs ................................................1-17

1.8.2 Ripple Channels .................................................................1-18

1.9 Presets..................................................................................... .......1-19

1.10 Naming Channels and Busses..................................................1-20

1.11 Channel Processing............................................................ .......1-21

1.11.1 EQ.......................................................................................1-21

1.11.2 Dynamics...........................................................................1-22

1.11.3Auxiliaries ..........................................................................1-22

1.12 The Matrix............................................................................. .......1-23

1.13 Control Groups .................................................................... .......1-24

1.14 Solo Setup............................................................................. .......1-25

SD10 Operation Manual

0-4

2.1 Introduction to Channel Types .............................................. .......2-2

2.2 Channel Input Setup - Common Elements ........................... .......2-2

2.2.1 Channel Strip InputArea ......................................................2-2

2.2.2 Channel Names ....................................................................2-2

2.2.3 Channel Safes.......................................................................2-3

2.2.4 Channel Settings ..................................................................2-3

2.2.5 Channel Solos ......................................................................2-5

2.3 Channel Output and Inserts - Common Elements............... .......2-6

2.3.1 Channel Strip OutputArea ...................................................2-6

2.3.2 Channel Strip InsertAreas ...................................................2-7

2.3.3 Console Output and Insert Routing ....................................2-7

2.3.4 Creating and Configuring FX Modules ...............................2-7

2.4 Input Channel Specific Functions ....................................... .......2-10

2.4.1 Trim and Track ....................................................................2-10

2.4.2 Input Routing ......................................................................2-10

2.4.3 Input Configuration ............................................................2-10

2.4.4 Output Routing ............................................................ .......2-11

2.4.5 Aux Busses and Assignable Controls ....................... .......2-11

2.4.6 Group Outputs ....................................................................2-12

2.4.7 Direct Outputs .....................................................................2-12

2.5 Group Channels Specific Functions................................... .......2-13

2.6 Aux Channels Specific Functions ..............................................2-13

2.7 Matrix Channels Specific Functions ..........................................2-14

2.8 Channel Signal Processing.................................................. .......2-14

2.8.1 Channel Filters (Input Channels Only) ..............................2-14

2.8.2 Channel EQ .........................................................................2-14

2.8.3 Channel Dynamics .............................................................2-16

2.9 LCD Functions...............................................................................2-17

2.9.1 Introduction to LCD Functions..........................................2-17

2.9.2 Solo......................................................................................2-17

2.9.3 Solo Choice.........................................................................2-17

2.9.4 GANG ...................................................................................2-17

2.9.5 JOIN CG ...............................................................................2-18

2.9.6 Assign Faders .....................................................................2-19

2.9.6 Unassign Faders ................................................................2-19

2.9.8 Copy Bank From.................................................................2-20

2.9.9 Copy Bank To .....................................................................2-20

2.9.10 Clear Bank.........................................................................2-20

SD10 Operation Manual

0-5

3.1 System Menu............................................................................ .......3-2

3.1.1 Diagnostics ...........................................................................3-2

3.1.2 Oscillator ...............................................................................3-2

3.1.3 Security .................................................................................3-2

3.1.4 Clear Over Indicators............................................................3-4

3.1.5 Overview Clear Screen.........................................................3-4

3.1.6 Keyboard Help ......................................................................3-4

3.1.7 F10: Reset FX........................................................................3-4

3.1.8 F11: Reset Engine ................................................................3-4

3.1.9 F12: Reset Surfaces .............................................................3-4

3.1.10 Set Date & Time ..................................................................3-4

3.1.11 Shutdown ............................................................................3-4

3.2 Files Menu................................................................................. .......3-5

3.2.1 Session Structure .................................................................3-5

3.2.2 Load Session ........................................................................3-7

3.2.3 Save Session ........................................................................3-7

3.2.4 Save As New File ..................................................................3-7

3.2.5 Load Presets .........................................................................3-8

3.2.6 Save Presets .........................................................................3-9

3.2.7 Global Set To Defaults ..........................................................3-9

3.2.8 Session Notes.....................................................................3-10

3.2.9 Session Report ...................................................................3-10

3.3 Layout Menu........................................................................... .......3-11

3.3.1 Fader Banks................................................................. .......3-11

3.3.2 Channel List ........................................................................3-12

3.3.3 Transport Control ...............................................................3-12

3.4 Snapshots Menu .................................................................... .......3-13

3.4.1 Storing a Snapshot.............................................................3-13

3.4.2 Recalling a Snapshot .........................................................3-14

3.4.3 Replacing a Snapshot ........................................................3-14

3.4.4 Editing Multiple Snapshots ................................................3-14

3.4.5 Moving a Snapshot.............................................................3-15

3.4.6 Renaming a Snapshot........................................................3-15

3.4.7 Renumbering Snapshots...................................................3-15

3.4.8 Deleting a Snapshot ...........................................................3-15

3.4.9 Snapshot Undo...................................................................3-15

3.4.10 Snapshot Groups .............................................................3-15

3.5.11 Global Recall Scope.........................................................3-17

3.5.12 Individual Snapshot Recall Scope .................................3-17

3.5.13 Snapshot Crossfades ......................................................3-18

SD10 Operation Manual

0-6

3.5.14 Snapshot Recall Times ....................................................3-19

3.5.15 Introducing Snapshots and MIDI.....................................3-19

3.5.16 Snapshot Control by MIDI ................................................3-19

3.4.17 MIDI Devices......................................................................3-20

3.4.18 MIDI Program and MIDI List..............................................3-20

3.4.19 GPOs and Snapshots.......................................................3-21

3.4.20 Surface Offline & Snapshot Editing ................................3-22

3.4.21 Snapshots and Transport Automation............................3-22

3.4.22 Auto Update ......................................................................3-22

3.5 Options Menu ......................................................................... .......3-23

3.5.1 Surface ................................................................................3-23

3.5.2 Faders..................................................................................3-24

3.5.3 Solo......................................................................................3-24

3.5.4 Disable.................................................................................3-25

3.5.5 Brightness...........................................................................3-25

3.5.6 Meters ..................................................................................3-25

3.5.7 Session................................................................................3-26

3.5.8 Status...................................................................................3-26

3.6 Matrix Menu.......3-28

3.6.1 The Matrix Panel .................................................................3-28

3.6.2 Matrix Presets .....................................................................3-29

3.7 Graphic EQs Menu .......................................................................3-29

3.7.1 Graphic EQ Panel................................................................3-29

3.7.2 Ganging Graphic EQs.........................................................3-30

3.7.3 Graphic EQ ALLButton ......................................................3-30

3.7.4 Graphic EQ Presets ............................................................3-30

3.8 Solos Menu............................................................................. .......3-31

3.8.1 The Solo Panel....................................................................3-31

3.8.2 The No Solo Setup Display ................................................3-32

3.8.3 Assigning Solo Busses to Worksurface Controls ...........3-33

3.8.4 Solo Outputs Routing................................................. .......3-33

3.8.5 Headphone Outputs ...........................................................3-33

3.9 Setup Menu....................................................................................3-34

3.9.1Audio I/O ..............................................................................3-34

3.9.2 Port Selection......................................................................3-34

3.9.3 Port Hardware Configuration.............................................3-34

3.9.4 Port Control.........................................................................3-35

3.9.5 The Socket Display.............................................................3-35

3.9.6 Socket Conforming ............................................................3-35

SD10 Operation Manual

0-7

3.9.7 Group and Socket Names ..................................................3-36

3.9.8 Socket Options ...................................................................3-36

3.9.9Audio Sync ..........................................................................3-36

3.9.10 Timecode & Transport......................................................3-37

3.9.11 Macros ...............................................................................3-37

3.9.12 The Macro Editor ..............................................................3-38

3.9.13 Talkback ............................................................................3-39

3.10 Screen and Light Brightness ............................................. .......3-40

4.1 Network and Mirroring ............................................................ .......4-2

4.1.1 Network Configuration.........................................................4-2

4.1.2 Mirroring for the first time.....................................................4-2

4.2 Multi-console Setups............................................................... .......4-4

4.2.1 FOH and Monitors sharing a stage rack .............................4-4

5.1 Troubleshooting ...................................................................... .......5-2

5.1.1 Starting the console .............................................................5-2

5.1.2 Audio not passing on certain channels ..............................5-2

5.1.3 Snapshots not recalling as expected..................................5-2

5.1.4 Snapshots not inserting as expected .................................5-2

5.1.5 Assigning console controls .................................................5-2

5.1.6 Console controls not affecting the audio ...........................5-2

5.1.7 Channels not appearing on the worksurface.....................5-3

5.1.8 No signal from the Solo buss ..............................................5-3

5.1.9 Signal from the Solo buss when nothing is soloed ...........5-3

5.1.10 External keyboard ..............................................................5-3

5.1.11 Resetting the console.........................................................5-3

5.1.12 Talkback ..............................................................................5-3

5.1.13 Meters ..................................................................................5-3

5.1.14 Console lighting..................................................................5-3

5.1.15 Joystick not responding as expected...............................5-3

5.1.16 Features not yet implemented ...........................................5-3

5.1.17 Diagnostics .........................................................................5-4

SD10 Operation Manual

0-8

Chapter 1 - Getting Started

1-1

SD10 Operation Manual

Chapter 1:

Getting Started

Chapter 1 - Getting Started

1-2

Table des matières

Autres manuels digico Équipement d'enregistrement

digico

digico S Series Manuel utilisateur

Manuels Équipement d'enregistrement populaires d'autres marques

KV2 Audio

KV2 Audio 500 Series Manuel utilisateur

Robotics Technologies

Robotics Technologies microBus-Cam II Manuel utilisateur

Seca

Seca 460 Manuel utilisateur

Cognex

Cognex MVS-8000 Series Manuel utilisateur

Mect

Mect MPNC006 Series Manuel utilisateur

Bad Caf

Bad Caf THE LEASH Manuel utilisateur

Strymon

Strymon NIGHTSKY Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuel utilisateur

Tews Technologies

Tews Technologies TPMC465 Manuel utilisateur

Honeywell

Honeywell Excel 50 Manuel utilisateur

SeaLevel

SeaLevel COMM+8.LPCI Manuel utilisateur

Arturia

Arturia AUDIOFUSE STUDIO Manuel utilisateur

Rukra

Rukra RK-1240 Manuel utilisateur

Samson

Samson SCOM Manuel utilisateur

Dynacord

Dynacord DPS260 Manuel utilisateur

Nice

Nice Core Manuel utilisateur

Pyle Pro

Pyle Pro PSS8 Manuel utilisateur

RF-System

RF-System TinyGate Manuel d'utilisation et d'entretien

digico SD10 Manuel utilisateur

Manuels Équipement d'enregistrement populaires d'autres marques