Page 3
3. In general
3.1 LNB
We do not recommend, that you connect more than one SMATV 112 to one
universal LNB. We recommend, that you use a quattro or twin LNB instead.
4. Display
When the receiver is not beeing programmed, it will show information about:
CHANNEL NAME
TEMPERATURE (how warm is the receiver)
PERIOD SINCE LAST RESTART
BIT ERROR RATE
NOTICE! If the display is ashing, the receiver has had a problem, and
has been restartet (via the Watchdog function).
5. Menu
Press ENTER to activate the menu, and then press ENTER again to open the
menu. In the display you will always be able to see, which possibility you have
to navigate. If p and q is shown in the display, then you are able to navigate up
and down in the menu. The same goes for t and u if shown, you can navigate
left and right in the menu.
5.1 1-LNB Setup
5.1.1 1-1-DiSEqC
With Æ you can choose between the following possibilities:
None = No DiSEqC
1 = DiSEqC input 1
2 = DiSEqC input 2
3 = DiSEqC input 3
4 = DiSEqC input 4
5.1.2. 1-2-LNB Type
Press ENTER and type in a value:
Universal - 9.75 GHz - 10.00 GHz - 10.05 GHz - 10.60 GHz - 10.75 GHz
DR1
UP:00000:20
29 C
BER:007%
p
q
1-1-DiSEqC
t 1 u
p
q
1-2-LNB Type
Universal u
