digi-tech XC4833 Manuel utilisateur
Model.: XC4833
USB 2.0 TO IDE & SATA Adapter
1.Characteristics
• Support SATA spread-spectrum transmitter
• Support SATA II Asynchronous Signal Recovery (Hot Plug) feature
• Compliance with USB 2.0 (Hi-Speed USB) electrical specification
• Compliance with USB Mass Storage Class Bulk-Only Transport Specification
• Support 480Mbps High Speed (HS) and 12Mbps Full Speed USB operation
• Support ATA/ATAPI-7
• Support ATA/ATAPI Ultra DMA Mode
• Support ATA/ATAPI PACKET command feature set
• Support ATA/ATAPI LBA48 addressing mode
• Support dual LUN (Logic Unit Number) for USB to ATA/ATAPI
• Support Windows 98se, Windows ME, Windows 2000, Windows XP, Windows Vista
• Need driver installation under Windows 98se
2. Software Installation
Windows 98se
1) Please put the enclosed CD into the CD-ROM
2) Please plug this USB HDD in the USB port of your computer.
3) The system will detect it and display the "Add New Hardware Wizard" dialog,
please press "Next"
1
4) When the following screen displays, please check "Search for the best driver for
your device (Recommended)" and press "Next".
5) When the following screen displays, please locate the driver folder included by the
driver CD-ROM shipped with this USB HDD
2
6) When the following screen displays, please press "Next"
7) When the following screen displays, please press "Finish"
Windows ME/2000/XP
No need driver installation in those OS platform.
3. Verification
Please track the path "My computer” and "My computer” -- > “System Properties”
-- > “Device Manager" and expand the item "Hard disk controllers”, you should meet
the following screen.
3
4. If you use a all new HDD
1) Please use " Fdisk " to set the capacity of your HDD, but this will destroy all the data
in the HDD.
2) Format your HDD by standard procedures, if you can't find your new HDD, please
following the steps in FAQ-1
Note: "Fdisk" or "Format" will destroy all the data and program in the HDD you select.
Please make sure there is not any data in it, or all the data have a backup copy.
5. FAQ
Q: I could see the icon at the right down comer on the screen, but I still couldn't find my
external HDD.
A: a. Please make sure your HDD has been installed correctly.
b. Please make sure your HDD has been set in "Master" position,
c. Please make sure you have installed correct driver for this USB HDD.
d. Please make sure your HDD has been formatted. If no, please format your hard
drive first.
e. If you are sure you have installed correctly all the hardware and software, please
follow the steps as below to catch your HDD.
i. Enter "Control Panel" and enter "System" icon
ii. Double click it to find a "System Manager".
iii. Find a "Disk drivers" category. There should be 3 drivers, double click the HDD
iV. Find the "Setting" button and choose the option “Removable Drive”
V. Your computer will automatically assign a new letter to this USB HDD after
restarting your computer
6. Caution!!
a. If you are not sure what OS you are using, please contact your PC dealer.
b. Please don't put this USB HDD in a humid or high-temperature environment.
c. If your first installation is failed, please firstly remove the wrong device through the
path as below: path=Control Panel > System > System Properties > Device Manager >
Please remove the items with "?" or "!" mark.
4
ONE TOUCH BACKUP
User's Manual
Notice
• The type of file system is able to support FAT32 and NTFS both.
• When users operate the PCClone EX Lite, the login must be from Administrator; it
can not login from the Guest or any authorized account.
• Does the hard disk happen to the bad sector? Please confirm in advance that can
prevent an improper operating of backup or restore.
• The File Backup doesn’t support the external HD button operating if the operating
system is Windows 98/ Me, please use the hot key instead of.
Software installation
Step
1. Please put PCClone EX CD into CD
ROM drive, the program directly goes
on the screen of PCClone Setup
Wizard.(In case the screen doesn’t
come out, please operate the window
box of “setup.exe”)
2. Click “install”.
3. Please read the license agreement
in detail.
4. If users accept the agreement, please
click “Agree” to install.
5
5. Please setup the installing pathway,
and then click “Install” to next.
6. The installation is completed, please
click “ OK” to exit.
7. “PCClone Ex” icon will displays in the
notification area after setup; users can
double- click the icon or press the right
key of the mouse to execute PCClone
EX.
6
Create Partition
If your USB HDD has managed already, please skip this part and move on next context.
Steps
-------------------------------------------------------------------------------------------------------------------
1. Please plug USB HDD. (Turn on the USB power.)
2. Please right click "My computer", and point
"manage".(It also can click in succession as"
Start"->"Control Panel"-> "Administrative Tools"->
"Computer management")
(If your USB HDD has managed already, please skip
this part and move on next context.)
3. Please click "disk management"
as the left window, and then find
the disk management as the right
window.
4. Please right click the disk of "
unallocated", and point the "new
Partition".
( In order to make sure the disk of "
Unallocated" whether the USB disk
uses this area or not, users can find
out by removing and plugging the
port of USB connection.)
5. Follow up the installation of "Partition
Wizard" to operate the disk of partition
and format.
7
6. Also, you can format USB hard disk by
"FNet FAT32 Utility" and then you can
start the backup function.
(The detail format steps please refer to
the section of "FNet FAT32 Utility".)
8
1. Please plug USB HDD, and turn
on the computer.
2. Click "Start" -> "All programs" -> "
PCClone EX" -> "FNet FAT32 Format
FAT32 Format Utility
For the current HDD capacity is getting bigger, the Fat32 Format Utility in Windows
2000 / XP is not able to support the HDD size exceeding 32GB;FNet recommends
FNet Fat 32 Format Utility, which can format the large capacity to be FAT32 Format
rapidly and fully, the size even maximums up to 4 TB (4000GB).
(Attention: all data in USB HDD will be deleted if you use this function)
Step
-------------------------------------------------------------------------------------------------------------------
3. Confirm the “ USB Device” and “Drive
to Format” in the FAT32 Format Utility,
and then press “start”.
4. Tick “ Quick Format” and click “Start”
for executing.
(Attention: all data in USB HDD will be
deleted if you use this function)
9
Table des matières
Autres manuels digi-tech Adaptateur
