Dickey-John HydraDrive Manuel utilisateur

INSTALLATION INSTRUCTIONS

HydraDrive

11001-1452-201702 Rev B

Safety Notices ..................................................................................................... 1

HydraDrive ........................................................................................................... 3

Specifications .................................................................................................................... 3

General ............................................................................................................................................ 3

Electrical ........................................................................................................................................... 3

Hydraulic Connections ..................................................................................................................... 3

Components ......................................................................................................................4

Assembly .......................................................................................................................... 4

Implement Installation ........................................................................................ 7

Hydraulic Connections ....................................................................................... 9

Closed-Center Hydraulics ................................................................................................. 9

Connecting Multiple HydraDrives (Closed-Center Hydraulics) ........................................................ 9

Open-Center Hydraulics ................................................................................................. 11

Pre-check ........................................................................................................................ 13

Manual Override ............................................................................................................................. 13

Warranty ..............................................................................................................15

INSTALLATION INSTRUCTIONS

HydraDrive

11001-1452-201702 Rev B

II /

INSTALLATION INSTRUCTIONS

HydraDrive

11001-1452-201702 Rev B

SAFETY NOTICES / 1

SAFETY NOTICES

Safety notices are one of the primary ways to call attention to potential

hazards.

This Safety Alert Symbol identifies important safety messages in this

manual. When you see this symbol, carefully read the message that

follows. Be alert to the possibility of personal injury or death.

Use of the word WARNING indicates a potentially hazardous

situation which, if not avoided, could result in death or serious

injury.

Use of the word CAUTION with the Safety Alert Symbol indicates a

potentially hazardous situation which, if not avoided, may result in

minor or moderate injury.

Use of the word CAUTION without the safety alert symbol

indicates a potentially hazardous situation which, if not avoided,

may result in equipment damage.

INSTALLATION INSTRUCTIONS

HydraDrive

11001-1452-201702 Rev B

2 / SAFETY NOTICES

INSTALLATION INSTRUCTIONS

HydraDrive

11001-1452-201702 Rev B

HYDRADRIVE / 3

HYDRADRIVE

The HydraDrive is a hydraulic motor with an integrated flow control valve

that delivers high torque at low speeds while consuming minimal hydraulic

oil. Hydraulic ports on the drives allow multiple HydraDrives to be

connected.

SPECIFICATIONS

GENERAL

RPM Operating Range: 4 to 180 RPM

Hydraulic Oil Usage: 4.9 in 3/rev (80 cc/rev)

Max Hydraulic Oil Usage: 4 gpm (15 LPM)

Maximum Torque: 1400 inch pounds (160 Nm)

Dimensions: 10.2 x 5.0 x 6.3 in (260 x 127 x160 mm)

Weight: 19.8 lbs (9.0 Kg)

ELECTRICAL

Control Signal: 12 Volts pulse width modulated

Control Frequency: 200 Hz

Maximum Current: 1.5 Amps

HYDRAULIC CONNECTIONS

Tractor Hydraulics: Closed Center or Open Center

HydraDrive Hydraulics:

Pressure port 1/2” SAE (7/8 UNO)

Return port 1/2” SAE (7/8 UNO)

INSTALLATION INSTRUCTIONS

HydraDrive

11001-1452-201702 Rev B

4 / HYDRADRIVE

COMPONENTS

HydraDrive components consist of the following items that must be

assembled prior to installation.

• Hydraulic motor

• Valve manifold

• Valve cartridge

•(4)bolts

A bracket will be required to attach the HydraDrive to the implement.

Figure 1

HydraDrive Components

ASSEMBLY

The mounting position of the manifold onto the motor will affect:

• Direction the motor will turn (clockwise or counterclockwise). The

motor direction is identified on the type and bottom of the manifold.

• Pressure and return inlets

To Assemble the HydraDrive:

1. Remove the red blocking plugs from the hydraulic motor and verify

o-rings are fitted within the pressure and return inlets.

IMPORTANT: Ensure the hydraulic motor mounting surface is clean

with no dust particles before attaching to the manifold.

Hydraulic Motor

Valve Manifold

Valve Cartridge

4 Bolts

INSTALLATION INSTRUCTIONS

HydraDrive

11001-1452-201702 Rev B

HYDRADRIVE / 5

Figure 2

Verify O-rings

Mounting of the manifold determines which direction the motor

will turn. Motor direction is identified on the top and bottom of the

manifold.

Figure 3

Secure Manifold to Motor

2. Determine the appropriate motor direction and align the valve manifold

mounting holes to the hydraulic motor.

3. Insert bolts into manifold holes and use an Allen wrench to tighten and

secure to motor.

Remove plugs and

verify o-rings are in place

Remove plugs and

verify o-rings are in place

Align valve

to motor.

Insert bolts to

secure placement.

INSTALLATION INSTRUCTIONS

HydraDrive

11001-1452-201702 Rev B

6 / HYDRADRIVE

4. Place the valve cartridge into the side hole of the valve manifold and

screw in until secure.

Figure 4

Valve Cartridge Placement

The motor is now ready to install to implement.

Figure 5

Assembled HydraDrive

INSTALLATION INSTRUCTIONS

HydraDrive

11001-1452-201702 Rev B

IMPLEMENT INSTALLATION / 7

IMPLEMENT INSTALLATION

To attach the HydraDrive to the implement, a heavy-duty bracket is required

either by making or purchasing from a dealer or distributor. The typical

mounting location is the center of the implement above the final planter

drive.

To Install HydraDrive to the Implement:

1. Attach steel bracket to implement frame to accommodate mounting of

HydraDrive.

2. Mount the HydraDrive to the bracket.

3. Attach appropriate drive sprocket on the 1” keyed output shaft of the

HydraDrive.

4. Install application rate sensor and coupler onto the 1” output shaft of

the HydraDrive.

Figure 6

Bracket Mounted to Implement

Drive

Sprocket

Application

Rate Sensor

Coupler

Bracket Mounting

Holes

INSTALLATION INSTRUCTIONS

HydraDrive

11001-1452-201702 Rev B

8 / IMPLEMENT INSTALLATION

Table des matières

Manuels Moteur populaires d'autres marques

Rotax

Rotax 125 senior MAX evo Manuel utilisateur

Kohler

Kohler K361 Manuel utilisateur

MTD

MTD OHV Series Manuel utilisateur

Kohler

Kohler COMMAND CH18-745 Manuel utilisateur

Mercury

Mercury D4.2L D-Tronic Manuel utilisateur

Selve

Selve SE Plus-RC Series Manuel utilisateur

Perkins

Perkins 1206E-E66TA Manuel utilisateur

Skov

Skov DA 174 Manuel

Rossi

Rossi TX11 Series Manuel utilisateur

Siemens

Siemens SIMOTICS T-1FW3 Feuille d'instructions

AL-KO

AL-KO PRO 350 Manuel utilisateur

MTU

MTU 12 V 4000 Lx4 Manuel utilisateur

Nanni

Nanni N3.30 Manuel d'instructions

Nanni

Nanni N5.160 CR2 Manuel utilisateur

KSB

KSB SuPreme Series Instructions d'installation

Hiwin

Hiwin EM1 Series Manuel utilisateur

Rotax

Rotax 912 i series Mode d'emploi

Siemens

Siemens SIMOTICS XP 1MB1 Manuel utilisateur