R00A_201909 5/7
1. Assembly the Filter Pan and put appropriate amount of
coffee on a Filter Paper.
2. Slide the Filter Pan into position.
3. Pour a pot of cool water into the water tank.
4. Place an empty Decanter or Pots at the correct position
under Filter Pan.
5. Switch the power ON, the “Brewing” Indicator lights up; a
process of brewing has begun.
6. Coffee start flows into the Decanter or Pots.
7. When “Brewing” Indicator lights off and there is no more coffee
flows out from the unit, a brewing cycle has completed.
8. The warmer on the base will continue heat up, until user turn the
switch off.
9. For the unit without warmers, please turn power OFF, and lock the
cap of Pot or Thermos. Apot of coffee can now be served.
10. Although the machine has an overflow pipe for the Reservoir
in case the amount of water in Reservoir exceeds. But, user
should be careful that the water does not exceed 2.2 liter to
avoid over flow.
11. Since there is always some water remaining in the unit at hoses or
boiler etc. If the Machine will not be used for some time, or if
the Machine to be removed, please pour out the remaining
water and clean it before storage.
12. When the Machine is to be used again after a long period,
please repeat steps of Installation.
13. If the Machine is not to be used for a short time, please clean the Machine with fresh water
before using again.
14. If the Warning indicator lights up, it to remind user to de-scale in time.
Caution! Remove the Brew Chamber carefully and slowly when
it hot!
Caution! Hot Surface!
DO NOT keep EMPTY decanter on Warming Plate.
