Diamond Digital DV1772FD Manuel utilisateur
DIAMOND DIGITAL®
DV1772FD / DV1772FDB
Colour Monitor
17” (43 cm) CRT Size
16” (40.6 cm) Viewable Area
User’s Manual
Diamond Digital is a registered trademark of Mitsubishi Electric Australia Pty. Ltd.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
Apple and Macintosh are registered trademarks of Apple Computer, Inc.
All other trademarks remain the property of their respective owners.
UG/MON1770H/0102/1
i
Table of Contents
1
1Important Safety Instructions .......................................... 1
2
2Features.............................................................................2
3
3Unpacking the Monitor .....................................................3
4
4Installation.........................................................................4
Drivers for Windows 95, 98, 2000, XP and Millennium Edition......5
5
5Adjusting the Monitor....................................................... 6
Selecting Functions and Making Adjustments...............................7
Contrast Hotkey..............................................................................7
Brightness Hotkey...........................................................................7
The Main Menu...................................................................................8
Making Adjustments........................................................................8
Timing and Refresh Rate Setting ...................................................11
Factory Preset Timings ................................................................111
6
6Troubleshooting............................................................ 122
7
7Specifications................................................................ 144
8
8Service Contacts........................................................... 166
Australian Service Contacts ........................................................166
ii
Copyright Notice
Copyright 2005, Mitsubishi Electric Australia Pty. Ltd. All rights reserved. No
part of this publication may be reproduced, transmitted, transcribed, stored in
a retrieval system or translated into any language or computer language, in
any form or by any means, electronic, mechanical, magnetic, optical,
chemical, manual or otherwise, without the prior written permission.
Disclaimer
Mitsubishi Electric Australia Pty. Ltd. makes no representations or
warranties, either expressed or implied, with respect to the contents hereof
and specifically disclaims any warranties, merchantability or fitness for any
particular purpose. Further, Mitsubishi Electric Australia reserves the right to
revise this publication and to make changes from time to time in the contents
hereof without obligation to notify any person of such revision or changes.
Reference Information
For future reference, write the following information about your monitor in
the space below. The serial number is on the back of the product or on the
bottom of its stand.
Monitor Information
Product Name: DV1772FD / DV1772FDB
Serial Number:
Date of Purchase:
Dealer Information
Dealer:
Telephone
Number:
Address:
1
1
1
Important Safety
Instructions
Please read the following safety instructions before installing or cleaning your
Diamond Digital monitor:
1. This monitor must be operated from the type of power source indicated
on the rating label. If you are not sure of the type of power available in
your area, consult your dealer or local electricity supply company.
2. This monitor must be operated with a 3 wire electrical cable that has a
plug with a third (grounding) pin. The plug must only be connected to a
grounded power outlet. This is a safety feature. Australian and New
Zealand customers should use the power cable supplied with the
monitor.
3. Make sure that the power outlet that you plug the monitor into is easily
accessible.
4. Unplug the monitor’s power cable from the wall outlet before cleaning.
Do not use liquid or aerosol cleaners. Use a soft cloth to clean the
monitor housing and screen.
5. Slots and openings on the back or top of the cabinet are provided for
ventilation. They must not be blocked or covered. This product should
never be placed near or over a radiator or other heat source, or in a
built-in installation unless proper ventilation is provided.
6. Never push objects of any kind, or spill liquid of any kind into the
monitor.
7. Do not attempt to service the monitor yourself as opening or removing
covers may expose you to dangerous voltages or other risks. Removing
the cover of the monitor may void warranty.
8. If any abnormal operation or an accident (such as dropping the unit)
occurs, disconnect the monitor from the wall power outlet and contact a
Mitsubishi Authorised Service Centre (see chapter 8 for details).
2
2
2
Features
Your Diamond Digital DV1772FD Monitor has the following features:
♦Plug and Play Compatibility
With DDC-2B™, the DV1772FD is compatible with the Plug and Play
features of Microsoft®Windows®95, 98, 2000, XP and Millennium
Edition.
♦Compatible with PC, Apple®Macintosh®and most other computer
systems.
♦Flicker-free Image
The monitor supports VESA standard graphics signals with flicker-free
refresh rates at resolutions up to 1024 x 768 pixels at 85Hz.
♦Larger Viewable Size
With its 40.6 cm (16”) diagonal viewable screen size, the DV1772FD
offers a larger viewable screen area than many other 17” CRT
monitors.
♦Easy to Use On Screen Display
The On-Screen Display (OSD) allows you to adjust all settings simply
with on-screen menus.
♦Low Power Consumption
Maximum power consumption is 75 watts. Most other 17” CRT
monitors use 100 watts or more. The power management complies
with VESA DPMS standard. When the system is idle (off mode), the
monitor automatically cuts its power consumption to less than 2 watts.
♦On Screen Display
Allows you to adjust all settings simply using on-screen menus.
♦Green Commitment
No CFCs are used in the manufacturing process of your monitor.
3
3
3
Unpacking the Monitor
Please check that the following items are included with your monitor. If they
are missing or damaged, please contact your place of purchase immediately.
♦Monitor with attached signal cable
♦Tilt/swivel base
♦Power cord
♦User’s manual
Locate the model name and the serial number label on the back of your
monitor and write the details of the monitor and your place of purchase in the
space on page (ii) of this manual for future reference.
4
4
4
Installation
Your monitor is equipped with an automatic power supply with a voltage
range from 100 to 240 Volts AC at a frequency of 50 to 60 Hz.
Install Remove
Connecting Cables
1. Power Cord 2. Signal Cable
To install your Diamond Digital DV1772FD monitor:
1. Make sure that the computer system’s power is turned off.
5
2. Place the monitor on its top on a soft surface, then use the arrow guides
to fit the swivel base onto the bottom of the display.
3. Place the monitor on its base and connect the power cord to the monitor,
then attach it to a power socket.
4. Connect the computer end of the D-SUB cable to the 15-pin output
connector on the video card of your computer.
5. Turn the monitor and the computer on.
If you wish to connect the monitor to an older-type Apple Macintosh
computer, you will need to use a Macintosh cable adaptor (sold separately).
The adaptor connects the video signal cable of your monitor to the video port
of the computer. Your computer dealer should be able to supply you with a
suitable adaptor.
Drivers for Windows 95, 98, 2000, XP and Millennium Edition
Windows will detect the Diamond Digital DV1772FD monitor the first time
you turn the computer on after installing it. The Add New Hardware wizard
will prompt for drivers. Install the standard Windows Plug & Play Monitor
driver. This driver will work correctly and allow you to use the monitor with its
optimal resolutions and refresh rates.
6
5
5
Adjusting the Monitor
You can adjust the monitor using its On-Screen Display (OSD) menu system.
There are 4 buttons that control the monitor:
To turn the monitor on and off
1. Power
2. POWER INDICATOR
3. MENU Activates OSD function or function adjustment
confirmation
4. / > Moves to another menu item or increases the
selected parameter. Hotkey for contrast adjustment.
5. / < Moves to another menu item or decreases the
selected parameter. Hotkey for brightness
adjustment.
Exit a function or OSD menu
6. EXIT
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Diamond Digital Moniteur
Diamond Digital
Diamond Digital DV50P1 Manuel utilisateur
Diamond Digital
Diamond Digital DiamondDigital DV260 Manuel utilisateur
Diamond Digital
Diamond Digital DX-DI92 Manuel utilisateur
Diamond Digital
Diamond Digital DV191 Manuel utilisateur
Diamond Digital
Diamond Digital DIAMOND DIGITAL DV197 Manuel utilisateur
Diamond Digital
Diamond Digital DV151J Manuel utilisateur
Diamond Digital
Diamond Digital DiamondDigital DV420 Manuel utilisateur
Diamond Digital
Diamond Digital DV196BW Manuel utilisateur
Diamond Digital
Diamond Digital DV1965B Manuel utilisateur
Diamond Digital
Diamond Digital Diamond Digital DV201B Manuel utilisateur
Diamond Digital
Diamond Digital DV321 Manuel utilisateur
Diamond Digital
Diamond Digital DV226BW Manuel utilisateur
Diamond Digital
Diamond Digital DV155 Manuel utilisateur
Diamond Digital
Diamond Digital DV177 Manuel utilisateur
Diamond Digital
Diamond Digital DX-D191P Manuel utilisateur
Diamond Digital
Diamond Digital DV300 Manuel utilisateur
Diamond Digital
Diamond Digital DiamondDigital DV42P1 Manuel utilisateur
Diamond Digital
Diamond Digital Diamond Digital DV171J/B Manuel utilisateur
Diamond Digital
Diamond Digital DV998FD Manuel utilisateur
Diamond Digital
Diamond Digital DV150J Manuel utilisateur
