DGTEC DG-HD0810 Manuel utilisateur

THE FUTURE OF HOME ENTERTAINMENT

HIGH DEFINITION SET TOP BOX – PVR READY

INSTRUCTION MANUAL MODEL NUMBER: DG-HD0810

BC80048

After Sales Support

TEL : 1800 189 941

After Sales Support TEL：1800189941 1

WARRANTY

High Definition Set Top Box – PVR Ready

What your 1 year warranty means

Great care has gone into the manufacture of this product and it should therefore

provide you with years of good service when used properly. In the event of product

failure within its intended use over the course of the first 1 year after the date of

purchase, we will remedy the problem as quickly as possible once it has been brought

to our attention. In the unlikely event of such an occurrence, or if you require any

information about the product please contact us via our after sales support services,

details of which can be found in this manual and on the product itself.

After Sales Support TEL：1800189941 2

WELCOME SECTION

High Definition Set Top Box – PVR Ready

Congratulations on choosing to buy a DGTEC™ product.

Our products are manufactured to the highest standards of performance and safety,

and are backed by our comprehensive 1 Year Warranty.

We hope you will enjoy using your DGTEC™ product for many years to come.

After Sales Support TEL：1800189941 3

INDEX

WARRANTY ..................................................................................................................1

WELCOME SECTION ...................................................................................................2

INDEX ............................................................................................................................3

GENERAL INFORMATION AND SAFETY INSTRUCTIONS .......................................4

ASSEMBLY AND PARTS LIST .....................................................................................5

1.1 PARTS LIST.............................................................................................................5

1.2 FRONT PANEL ........................................................................................................6

1.3 REAR PANEL ..........................................................................................................7

1.4 REMOTE CONTROL UNIT......................................................................................8

1.5 INSTALLING THE BATTERIES IN THE REMOTE CONTROL................................9

1.6 CONNECTING TO EQUIPMENT ..........................................................................10

GETTING STARTED ...................................................................................................12

INSTRUCTIONS ..........................................................................................................14

2.1 INSTRUCTIONS ....................................................................................................14

2.2 PROGRAM ............................................................................................................14

2.3 PICTURE ...............................................................................................................16

2.4 CHANNEL SEARCH..............................................................................................17

2.5 TIME ......................................................................................................................18

2.6 OPTION .................................................................................................................19

2.7 SYSTEM ................................................................................................................19

2.8 USB........................................................................................................................21

2.9 REC QUICK START GUIDE ..................................................................................23

FAQ..............................................................................................................................25

TROUBLE SHOOTING ...............................................................................................26

SPECIFICATION .........................................................................................................27

MEMO..........................................................................................................................28

After Sales Support TEL：1800189941 4

GENERAL INFORMATION AND SAFETY

INSTRUCTIONS

SAFETY

．Never place the unit in hot, humid or excessively dusty places.

．Do not install the unit where it may be exposed to mechanical vibrations.

．This product should be operated only from the type of power source indicated on the

rear of the unit.

．Do not touch the power cord with a wet hand or continue to use a damaged power

cord. It may cause an electric shock.

．Never open the cover. High voltage in the unit may result in electrocution.

．Disconnect the power cord to the unit before connecting any cables.

CAUTION

．To prevent fire or electrical shock do not expose the appliance to water.

．Ensure that objects filled with liquids, such as vases, are not placed on the

apparatus.

．If an object or liquid gets into the unit, disconnect the plug and ask an approved

technician to check the unit.

．Never place the unit in a confined space such as a bookcase or built-in cabinet

unless proper ventilation is provided. Leave a 10cm gap around the unit.

．The recommended operating temperature is from 0 ~ 40℃℃and humidity should be

under 95%.

．For your own safety, do not touch any part of the unit, power lead or aerial

lead during a lightning storm.

．Use a damp cloth to clean the unit.

．Do not use liquid cleaners, solvent or abrasive products, etc.

This symbol indicates that high voltage is present inside. It is dangerous to

make contact with any part inside the case.

This symbol alerts you of important information concerning operation and

maintenance of this product.

Never allow children to play with electrical equipment.

After Sales Support TEL：1800189941 5

ASSEMBLY AND PARTS LIST

1.1 Parts List

Please make sure the following accessories are supplied with the STB.

① High Definition Digital Set Top Box

② Remote Control

③ RCA Composite Video/Audio Cable

④ Batteries (AAA Size)

⑤User Manual

⑥Quick Start Guide

After Sales Support TEL：1800189941 6

ASSEMBLY AND PARTS LIST

1.2 Front Panel

1. Front Panel Display

Front panel window displays information concerning current operation such as CH

number. The green LED lights up when the channel is locked in. A hidden sensor

senses infrared signal from the remote control.

2. Volume -/+ Button

Moves the cursor left/right when menu is selected, or adjusts the volume level in

operational mode.

3. CH -/+ Button

Moves the cursor down/up when in the menu or changes the current program to the

next/previous channel in operational mode.

4. Standby Button

Press to switch between operation and standby modes.

After Sales Support TEL：1800189941 7

ASSEMBLY AND PARTS LIST

1.3 Rear Panel

1. ANT OUT

Used to loop to an extra analogue or digital device.

2. ANT IN

Used to connect an antenna.

3. YPbPr

Connects component video to HD Monitors (YPbPr Type).

4. VIDEO (Yellow Connector)

Connect to a TV with video input.

5. AUDIO L/R (White / Red RCA)

Connects to a TV audio input, HD Monitors audio input or an External Audio

Amplifier.

6. DIGITAL AUDIO (S/PDIF / Optical)

Connects to an External Audio Amplifier with S/PDIF / Optical Digital Audio

(optional).

7. HDMI Connector

Connects High-Definition Multimedia output to HD Monitors (HDMI Type).

8. USB

USB port is used for viewing external files (MP3 audio files and JPEG or BMP

images), recording contents to an external USB memory device, playback of

contents recorded by this device and for software upgrades. (Software upgrades

only when advised by service technician.)

9. POWER CABLE

This is used to connect to your main power supply.

After Sales Support TEL：1800189941 8

ASSEMBLY AND PARTS LIST

1.4 Remote Control Unit

All STB features can be operated with the remote control.

1. POWER: Press to switch between

operation and standby mode.

2. USB: Press to enter the USB menu. You

can playback the recording files.

3. NUMERIC KEYS: Press to input

Channel Numbers, Passwords or Letters.

4. TV/RADIO: Switch between TV or

RADIO mode.

5. MUTE:Press to mute the sound.

6. EPG: Displays the Electronic Program

Guide. You can book a recording.

7. EXIT: Press to return to the previous

menu or to exit from the current mode.

8. ASPECT RATIO: Press to select aspect

ratio mode.

9. FAV: Press to display Favorite Channel

List.

10. Up▲/ Down▼: Changes the channel

or moves the cursor in the menu.

11. Left◄/ Right►: Adjusts volume or

moves the cursor in the menu.

12. MENU: Press to display the Main

Menu.

13. PAGE +/ PAGE–: Press to page

up/down in the channel list.

14. OK: Press to select the item in the

menu or to list the TV/Radio channels.

15. INFO: Displays the information of the

current program.

16. TIMER: Enter the schedule menu. You can book a timer event.

17. AUDIO: Selects the audio mode.

18. RECALL: Press to return the previous channel.

19. FREEZE: Freezes the video output of the STB.

20. SCAN: Auto scan.

21. GOTO: Go to the designated point in a media file.

22. SUBTITLE: Press to view subtitles (Closed Captioning).

23. SPECIAL FUNCTION KEYS: Special keys designated for playing MP3s on a

USB drive, or for recording/playing programs to a USB drive.

After Sales Support TEL：1800189941 9

ASSEMBLY AND PARTS LIST

1.5 Installing the batteries in the remote control

1. Press down on the retaining catch on the lid of the battery recess on the remote

control and slide downward to remove the lid.

2. Insert two AAA batteries into the recess.

3. Replace the lid over the recess and gently push down on the lid and slide upward

until it snaps firmly into place.

Caution

1. Keep batteries out of the reach of children.

2. Do not attempt to recharge, short-circuit, disassemble, heat or throw the batteries

into a fire.

3. Always replace both batteries at the same time. Never mix new and old batteries

or batteries of a different type.

4. If you don’t intend to use the remote control for an extended period, remove the

batteries to prevent possible leakage and corrosion.

5. Do not drop, apply shock or step on the remote control.

6. Do not spill water on the remote control.

Note: If the STB does not respond when operating the remote control from a

close range, you will need to replace the batteries.

Using the Remote Control

1. To use the remote control, point it towards the front of the STB.

2. The remote control has a range of up to 7 metres from the STB at an angle of up

to 60 degrees.

3. The remote control will not operate if its path to the sensor on the front panel of the

STB is blocked.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels DGTEC Décodeur

DGTEC

DGTEC DG-HD500PVR Manuel utilisateur

DGTEC

DGTEC DG-SD3401 Manuel utilisateur

DGTEC

DGTEC DG-HD3040 Manuel utilisateur

DGTEC

DGTEC DG-HD8040 Manuel utilisateur

Manuels Décodeur populaires d'autres marques

VBrick

VBrick 8000-0188 Manuel utilisateur

Kogan

Kogan KGNPVR500VAA Manuel utilisateur

Asus

Asus O!PLAY MEDIA PRO Manuel utilisateur

Samsung

Samsung ICU 100 Manuel utilisateur

VECTORMAX

VECTORMAX A12E Manuel utilisateur

DStv

DStv Explora Manuel utilisateur

Ace Digital TV

Ace Digital TV ADB 3800 Manuel utilisateur

Cisco

Cisco 4398DVB Manuel utilisateur

Polaroid

Polaroid KHA-01651B Manuel utilisateur

Samsung

Samsung GX-SM530CF Manuel utilisateur

BT Business Total Broadband Manuel utilisateur

Megasat

Megasat HD 720 plus Manuel utilisateur

Sungale

Sungale STB608 Manuel utilisateur

Amino

Amino Amigo 7X Manuel utilisateur

Geniatech

Geniatech ATV225 Manuel utilisateur

Android

Android Androidminibox mx2 se Manuel utilisateur

Hama

Hama Internet TV Box Manuel utilisateur

Ariva

Ariva T650i Manuel utilisateur