DFI WM343-SD Series Manuel utilisateur
1
WM343-SD Series Installation Guide
•
One WM343-SD330/WM343-SD331 system unit
•
1 SATA data cable
•
1 CPU cooler and 1 system fan
• HDD mounting screws
•
1 Quick Installation Guide
•
1 CD disk includes:
-Drivers / Manual
Package Contents
Panel
Front View
DFI reserves the right to change the specifications at any time prior to the product's release. For the latest revision and for a more
details of the installation process, please refer to the user's manual on the website.
www.dfi.com
Expansion card slot
DVI-I
(DVI-D signal)
DP++
SATA
drive bay
Line-in (optional)
Line-out
Mic-in
LAN 1 LAN 2
USB 3.0 1-4
Rear View (WM343-SD330/WM343-SD331)
Optical drive bay
(optional)
PS/2 KB/MS
USB 2.0
COM1
VGA
2
Opening the Chassis
Please observe the following guidelines and follow the procedure to open
the system.
1. Make sure the system and all other peripheral devices connected to it have
been powered off.
2. Disconnect all power cords and cables.
3. Remove the top cover by uninstalling the thumb screws.
Thumb screw
3
Installing a DIMM
To access the DIMM sockets, first remove the CD tray by uninstalling the screws
from the rear panel and inside the chassis.
CD tray screw
CD tray screw
4
1. Align the notch on the DIMM with the tab in the DIMM connector.
2. Press down on the DIMM until the release tabs spring back to secure the
DIMM in place.
The installed DIMM
Notes:
1. The WM343-SD330 is equipped with two or four DDR4 (dual channel) sockets depending
on the chipset.
2. The WM343-SD331 is equipped with four DDR4 (dual channel) sockets.
5
Installing a 3.5" SATA Drive
1. Remove the thumb screws that secure the HDD drive bay to the chassis and
remove the drive bay.
Thumb screw
3.5" SATA Drive
2.
Secure the hard drive to the drive bay. Align the mounting holes on the SATA
drive with the mounting holes on the HDD drive bay. Use 4 mounting screws
to install the hard drive onto the HDD drive bay.
Drive bay
Mounting screw
Mounting screw
6
3. Slide the HDD drive bay back to the system and secure it with the thumb screws.
4. Connect the SATA data cable and power cable to the connectors on the SATA
drive. And connect the other end of the SATA data cable on the motherboard.
2.5" SATA Drive
Use the same HDD drive bay to secure a 2.5" hard disk to the system. Refer to the
pictures below for the location of mounting holes.
Mounting screw
Mounting screw
SATA data and
power cable
SATA Port
7
Installing More Than One SATA Drive (Optional)
To install more than one 2.5" SATA drive, use the 5.25" optical drive bay. And to
install more than one 3.5" SATA drive, order another HDD drive bay, which will
replace the optical bay in the system.
Use the following procedure to install a second and third 2.5" HDD/SSD:
1. Attach 4 standoffs to the 2.5" HDD or SSD.
Mounting screw
Mounting screw
2. Secure the hard drive to the optical drive bay. Align the standoffs on the HDD
with the mounting holes on the optical drive bay. Use 4 mounting screws to
install the hard drive onto the optical drive bay.
Mounting screw
Mounting screw
8
3. Install the optical drive bay back to the system.
4. Connect the SATA data cable and power cable to the connectors on the SATA
drive. And connect the other end of the SATA data cable on the motherboard.
SATA data and
power cable
SATA data and
power cable SATA Port
9
Installing a PCI or PCIe Expansion Card
Screw
Use the following procedure to install a PCIe expansion card:
1. Remove the mounting screws to uninstall the card slot bracket.
2. Insert the expansion card in the connector on the
motherboard
and press
down until secured.
PCIe card
Card slot bracket
10
Rear View
PCIe card
3. Reinstall the card slot bracket to secure the expansion card in place.
Notes:
1. The WM343-SD330 is equipped with one PCIe x16, one PCIe x4 and two PCI slots.
2. The WM343-SD331 is equipped with two PCIe x16 and two PCIe x4 slots.
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels DFI Ordinateur de bureau
DFI
DFI EC700-AL Manuel utilisateur
DFI
DFI EC531-KH Manuel utilisateur
DFI
DFI EC800 Series Manuel utilisateur
DFI
DFI EC800 Series Manuel du propriétaire
DFI
DFI DT122-CR Manuel utilisateur
DFI
DFI WM343-MB Manuel utilisateur
DFI
DFI KS190-KH Manuel utilisateur
DFI
DFI BPC370-BW Manuel utilisateur
DFI
DFI WM343-KD330 Manuel utilisateur
DFI
DFI EC70A-SU-394 Manuel utilisateur
DFI
DFI EC221-BT Manuel utilisateur
DFI
DFI EMBEDDED ES300 Manuel utilisateur
DFI
DFI DT122-CR Manuel utilisateur
DFI
DFI WM342-KD Series Manuel utilisateur
DFI
DFI DT122-HD Manuel utilisateur
DFI
DFI OPS100-SH Manuel utilisateur
DFI
DFI DT122-SD Manuel utilisateur
DFI
DFI DT122-HR Manuel utilisateur
DFI
DFI DT122-HR Manuel utilisateur
DFI
DFI RM641 Manuel utilisateur
