DEWESOFT DS-CAM 600 Manuel du produit
DS-CAM 600
TECHNICAL REFERENCE MANUAL
DS-CAM 600 V20-1
1
DS-CAM 600
TECHNICAL REFERENCE MANUAL
1. Table of contents
1. Table of contents 2
2. About this document 3
2.1. Legend 3
3. Key features 4
3.1. System Requirements 4
3.2. Naming 5
4. Technical data 6
4.1. Specification 6
4.2. Connections 8
4.2.1. Connectors and pinout 8
4.2.2. SIRIUS connection example 9
4.2.3. Connecting to existing DEWETRON systems 9
4.3. Resolutions / Framerates 11
5. Installation 13
5.1. Installation – in DEWESoft X 13
5.2. Installation – in DEWESoft 7.1 13
5.2.1. Required files 13
5.2.2. Step-by-step instruction 14
6. FAQ 19
6.1. Reference list 22
7. Warranty information 23
7.1. Calibration 23
7.2. Support 23
7.3. Service/repair 23
7.4. Restricted Rights 23
7.5. Printing History 24
7.6. Copyright 24
7.8. Trademarks 24
8. Safety instructions 24
8.1. Safety symbols in the manual 24
8.2. General Safety Instructions 24
8.2.1. Environmental Considerations 25
8.2.2. Product End-of-Life Handling 25
8.2.3. System and Components Recycling 25
8.2.4. General safety and hazard warnings for all Dewesoft systems 25
9. Documentation Version 28
DS-CAM 600 V20-1 2/27
DS-CAM 600
TECHNICAL REFERENCE MANUAL
2. About this document
2.1. Legend
The following symbols and formats will be used throughout the document.
Important
It gives you important information about the subject.
Please read carefully!
Hint
It gives you a hint or provides additional information about a subject.
Example
Gives you an example of a specific subject.
DS-CAM 600 V20-1 3/27
DS-CAM 600
TECHNICAL REFERENCE MANUAL
3. Key features
The DS-CAM-600 is a high-speed Gigabit-Ethernet camera with following key data:
●600fps @ VGA (640x480)
●Full HD resolution 1920x1080
●Real-time data streaming with full resolution
●Monochrome
●Power-over-Ethernet (PoE)
●Real-time JPEG compression
●Sync (Triggered and free-run mode)
●Adjustable shutter time
●Standard C-Mount
●Small compact form factor
●Ruggedized (high-shock and vibration resistant, aluminium housing)
The camera supports the high-performance industrial standard “GigE Vision”. The standard introduced
in 2006 provides a framework for transmitting high-speed video and related control over Ethernet
networks.
The benefits are: high speed data transfer rates up to 1GBit/s (based on 1000Base-T) connectible to every
standard GigE Ethernet port and cable lengths up to 100m.
Dewesoft uses Smartek GigE SDK for communication with cameras that support GigE Vision standard.
Important
For best performance we recommend using a Core i5 CPU or better, 4 GB RAM and SSD for
storing data.
3.1. System Requirements
●1 Gigabit-Ethernet port
●Good PC performance (Core i5 CPU or better recommended, 4 GB RAM)
●DEWESoft X or 7.1
●Smartek GigE Vision SDK 2.6.2
●DEWESoft GigE driver (cdv) 2.0
3.2. Naming
For simplification the camera is called “DS-CAM-600” in this document. The correct name is “DS-CAM
GigE1-600”.
DS-CAM 600 V20-1 4/27
DS-CAM 600
TECHNICAL REFERENCE MANUAL
4. Technical data
4.1. Specification
DS-CAM-600
Color option
Color
✓
Monochrome
-
Optical specifications
Image sensor
CMOSIS CMV2000 2E5M1PP
Sensor type
CMOS
Resolution
VGA 640x480
FPS
300 FPS @ 1920x1080
600 FPS @ 640x480
Optical size
Diagonal 12.7 mm (2/3'')
Pixel size (in μm)
5.5 x 5.5
Dynamic range
60 dB
Shutter
Electronic Global Shutter
Shutter time
210 ns - 90 s
Color correction
Color (DS-CAM-600c):✔
B&W (DS-CAM-600bw):
❌
Mechanical specifications
Operating temperature
0 .. +50°C
Operating humidity
25% - 80% (no condensation)
Dimensions
54 x 40 x 92mm
(2.13 x 1.57 x 3.63in)
Lens mount
C-mount (1'' 32G thread)
Connectors
Gigabit Ethernet: RH45
Conformoty
CE
EN55022, class A
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-6
FCC Part 15, class A RoHS
GigE Vision 1.2
Power specifications
Supply voltage
Power-over-Ethernet (42-57V)
DS-CAM 600 V20-1 5/27
DS-CAM 600
TECHNICAL REFERENCE MANUAL
Power-over-Ethernet
✔
Power consumption
6 W
Illustration 1: Mechanical Drawing
DS-CAM 600 V20-1 6/27
DS-CAM 600
TECHNICAL REFERENCE MANUAL
4.2. Connections
4.2.1. Connectors and pinout
On the backside of the camera there are two connectors. For the trigger input there is a 4 pin Lemo 00
(called “IO connector”), for the data transfer an Ethernet connector. The pinout of the Ethernet
connector is according to the standard.
Illustration 2: Connectors
Illustration 3: IO connector pinout
Note that pins 3 and 4 are used for clocking the camera. Pins 1 and 2 are reserved for synching multiple
DEWESoft instruments!
4.2.2. SIRIUS connection example
In this picture you see a typical SIRIUS device consisting of a S-Box unit (integrated PC) on bottom and
one SIRIUS slice on top (from rear side).
DS-CAM 600 V20-1 7/27
DS-CAM 600
TECHNICAL REFERENCE MANUAL
The camera is powered via PoE (Power over Ethernet, via LAN connector), therefore a Power injector is
required (Gigabit-LAN port of computer → PoE injector → camera).
The second cable provides the trigger, connected to the SYNC port of the SIRIUS slice. The camera
frames are now in perfect sync with the analog data acquired by DEWESoftTM.
Note: Even if the camera is connected, synching to other SIRIUS devices is still possible, because there
are different pins used on the Sync-Connector for triggering/synching (see also IO connector pinout).
Illustration 4: SIRIUS S-Box with one SIRIUS on top, connected to the DS-CAM-600 (PoE injector in between)
4.2.3. Connecting to existing DEWETRON systems
The DS-CAM-600 is also compatible with existing DEWETRON systems.
Please consider the system requirements:
●See chapter System requirements
●DEWETRON instruments must not have DI-ISO option (isolated inputs/outputs)! In this case
clocking is not possible, only free-run (the CLK pin is not available on the connector).
Free-run operation (without clocking) is easy, just connect the camera over PoE injector to the GigE LAN
port.
DS-CAM 600 V20-1 8/27
DS-CAM 600
TECHNICAL REFERENCE MANUAL
If you want to trigger the camera, you have to use a special cable for the trigger/clock line. Usually every
DEWETRON instrument is equipped with a 37pin DSUB connector, please see DEWETRON manual for
pinout, here for example is the pinout for the Orion-1622-100 (see Reference List (b)).
●Connect EXT_CLK1 (pin 17) to CLK of the Lemo 00 connector of the camera (pin 3).
●Connect DGND (pin 37) to GND of the Lemo 00 connector (pin 4)
●Set the pin EXT_CLK1 to “Video” in DEWESoft hardware setup
Illustration 5: DEWETRON Orion-1622-100 DSUB 37 pinout
DS-CAM 600 V20-1 9/27
DS-CAM 600
TECHNICAL REFERENCE MANUAL
Illustration 6: Clockout setup of EXT_CLK1 pin in DEWESoft
4.3. Resolutions / Framerates
Sensor type
CMV2000
Active pixels
2048 x 1088
STANDARD RESOLUTIONS
Resolution
Active pixels
MAX. FRAME RATE
Full frame 4.2M
2048 x 2048
N/A
Full frame 2.2M
2048 x 1088
333 FPS
2K
2048 x 1080
336 FPS
HD 1080
1920 x 1080
336 FPS
SXGA
1280 x 1024
355 FPS
XGA
1024 x 768
471 FPS
HD 720
1280 x 720
502 FPS
DS-CAM 600 V20-1 10/27
Autres manuels pour DS-CAM 600
1
Table des matières
Autres manuels DEWESOFT Caméra de sécurité
