Dewenwils HCSL06B Manuel utilisateur
SKU: HCSL06B
[Instruction Manual]
LED String Lights
Thank you for your purchase.
Please contact us if you have any questions.
We will get back to you within 24 hours.
Email: [email protected]
Please attach your Order ID so that
we can assist you better.
1.Keep the product out of reach for babies, children and pets in case of fire,
burns and electric shock.
2.Do not turn unwrapped or messy lights on as the accumulative heat
couldn't give out promptly and cause fire.
3.Do not place the string lights near gas, heaters, fireplaces, candles or
other ignitions. It is forbidden to be put on carpets, curtains and other
furniture or cover it with cloth, paper, and any other material while the
power is on.
4.Do not secure wires with staples, nails or sharp hooks. Please close
doors or windows carefully to prevent insulating layer damage.
5.Do not hang ornaments on the product as they the wires may break off
due to heavy weight.
SAFETY WARNINGS
Inspect the product carefully before using. Discard the product if there is
any damage to the wires or lights.
This LED String Light is rated 2.4 Watts. Connect other decorative outfits
up to 216 Watts in total. Do not overload during use.
This product adopts overload protection (fuse). A blown fuse indicates an
overload or short circuit situation. If the fuse blows, unplug the string lights
and any additional strings that connected to it. Replace the fuse according
to the replacement instruction, then check if it works. If the replacement
fuse blows again, it may show short circuit and you should discard the
product.
Do not use it with bulbs missing and missing bulbs should be added
immediately.
When hanging on a tree, the tree should be well secured and stable.
After use, remove the product gently to avoid any scratches to the wires or
lights.
Do not perform any troubleshooting or maintenance for broken lamps when
the power is on.
When not in use, unplug the product, keep it in a cool dry place and avoid
direct sun exposure.
DAILY USE AND MAINTENANCE
01
REPLACEMENT INSTRUCTION
02
1.Unplug the product before changing fuses. Grasp the plug and remove it
from the outlet instead of pulling the cord.
2.To avoid risk of fire, do not replace attachment plug. Discard product if
the attachment plug is damaged.
a.Open the fuse cover on the plug and remove the burn fuse.
b.Install the new 3 Amp 125 Volt fuse.
C.Close fuse cover. Make sure the fuse is fully covered by the lid.
Fuse Replacement
Specifications:
125V USE
USE NLY
3A AX.
125VU
S
E
U
S
E NLY
3A A
X.
125VUSE
USE NLY
3A AX
.
T
ING SHEN
TS 23
10cm 20cm 10cm
One Year Limited Warranty
DEWENWILS warrants this product to be free from defects in material and
workmanship for a period of one year from the date of purchase.
Warranty will be void if damage is due to misuse or improper installa- tion.
Please contact us if you have any questions.
Email: [email protected].
03
- Bulb Quantity: 50 pcs
- Bulb Spacing: 7 7/8'' (20 cm)
- Lead Length: 0.67ft
- Lighted Length: 32.63ft
- Total Length: 33.3ft
- Input Voltage: 120VAC 60Hz
Table des matières
Autres manuels Dewenwils Équipement d'éclairage
Manuels Équipement d'éclairage populaires d'autres marques
Qazqa
Qazqa Suplux SL 3 Black 103062 Manuel utilisateur
Commercial Electric
Commercial Electric 54568141 Manuel utilisateur
CREE LIGHTING
CREE LIGHTING 304 Series Manuel utilisateur
Goobay
Goobay 49867 Manuel utilisateur
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Manuel utilisateur
Alkalite
Alkalite Krypton KT-81 Manuel utilisateur
