Devolo DLAN duo Manuel utilisateur

Autres manuels pour dLAN duo

2

Table des matières

Autres manuels Devolo Adaptateur

Devolo

Devolo 200 AVplus Manuel utilisateur

Devolo

Devolo 200 AV Wireless G Manuel utilisateur

Devolo

Devolo TV Sat Manuel utilisateur

Devolo

Devolo MicroLink dLAN ADSL Modem Manuel utilisateur

Devolo

Devolo dLAN duo Manuel utilisateur

Devolo

Devolo dLAN 550 WiFi Manuel utilisateur

Devolo

Devolo dLAN 650 triple+ Manuel utilisateur

Devolo

Devolo dLAN 1200 triple Plus Manuel utilisateur

Devolo

Devolo 200 AV Wireless G Manuel utilisateur

Devolo

Devolo Magic 2 WiFi next Manuel utilisateur

Devolo

Devolo dLAN 500 AVtriple+ Manuel utilisateur

Devolo

Devolo dLAN 200 AVpro Manuel utilisateur

Devolo

Devolo 200 AVplus Manuel utilisateur

Devolo

Devolo dLAN 500 WiFi Manuel utilisateur

Devolo

Devolo Highspeed Ethernet II Manuel d'instructions

Devolo

Devolo dlan 550 duo+ Manuel utilisateur

Devolo

Devolo 200 AVdesk Manuel utilisateur

Devolo

Devolo dLAN 500 duo+ Manuel utilisateur

Devolo

Devolo Magic Series Manuel utilisateur

Devolo

Devolo dLAN 1200+ Manuel utilisateur

Devolo

Devolo dLAN 500 AVplus Manuel utilisateur

Devolo

Devolo Magic WiFi 2-1-2 Manuel utilisateur

Devolo

Devolo dLAN 500 AVpro+ Guide d'installation

Devolo

Devolo 200 AV Wireless G Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur

Version: 24.11.11

devolo AG . Charlottenburger Allee 60 . 52068 Aachen . Tel.: +49 (0) 241 182 79 0 . Fax: +49 (0) 241 182 79 999 . www.devolo.com . info@devolo.com

The dLAN® encryption button

All dLAN® products are shipped with encryption (128-bit

AES) activated. To enable easy setup, all products have

the password "HomePlugAV". For this reason, all

adapters form a network after being plugged in.

To increase the security even more, you can assign your

network an individual password using the encryption

button.

The dLAN® AV products have an encryption button. This is usually located on the bottom next to the

network jack (refer also to the product manual). To assign your network a random password, please

proceed as follows:

Plug both adapters into a power outlet.

Press the encryption button on one adapter.

The power LED of the adapter begins to flash.

Now press the encryption button of the second

adapter before 2 minutes pass.

After the power LED on both adapters are

continuously light again, the procedure is

completed.

To add another adapter to the network, proceed as follows:

Prepare the new adapter by plugging it into a power outlet and holding down the encryption

button for 10 seconds. The power LED goes out for a short moment, all LEDs light up briefly and

then the power LED lights up again and remains lit. Now the adapter is prepared.

Now press the encryption button on one of the adapters which is already in the network.

Now press the encryption button of the new adapter again briefly before 2 minutes pass.

After the power LED on both adapters are continuously light again, the procedure is completed.

To remove an adapter from the network, proceed as follows:

Hold down the encryption button of the adapter you want to remove for 10 seconds. The power LED

goes out for a short moment, all LEDs light up briefly and then the power LED lights up again and

remains lit. Now the adapter is removed from the network.

Version: 24.11.11

devolo AG . Charlottenburger Allee 60 . 52068 Aachen . Tel.: +49 (0) 241 182 79 0 . Fax: +49 (0) 241 182 79 999 . www.devolo.com . info@devolo.com

Tips:

The encryption button functions as follows:

0.1 – 3 seconds: Start encryption mode

3 – 10 seconds:Buffer time without function

>10 seconds: Generate a new random password

Exit encryption mode

Encryption mode begins after briefly pressing the encryption button. It can be ended in three ways.

After successful encryption with another adapter

After 2 minutes have passed without successful encryption

By briefly pressing the encryption button again

Easy encryption

Plug the adapters you want to encrypt into a power strip together and

carry out the encryption process as described above. Now you can carry

out the encryption without haste and then position the adapters in the

correct power outlet. The adapters do not lose their password after being

unplugged.

Multiple networks in the mains supply

You can set up multiple, logically disconnected networks by assigning the adapters different

passwords.

To do so, simply carry out the encryption process as described above separately for both networks.