After each use, allow the helmet to air dry and then store in a cool, dry
place. Excessive heat can damage the helmet. In direct sunlight, the
back ledge of car, behind rear window and other places that can get hot
enough, will cause heat damage. Damaged helmets will appear to have
uneven or bubbly surfaces. DO NOT USE HEAT DAMAGED HELMETS.
The helmet should be adjusted to ft the user, e.g. the straps positioned so
that they dot not cover the ears, the buckle positioned away from the
jawbone and the straps and buckle adjusted to be both comfortable and
firm; how the helmet should be positioned on the head to ensure the
intended protection is provide (e.g. that it should be placed so as to
protect the forehead and not be pushed too for over the back of the
head); to protect the forehead and not be pushed too for over the back of
the head); a helmet cannot always protect against injury; a helmet
subjected to a severe impact should be discarded and destroyed; a
statement of the danger of modifying or removing any of the original
component parts of the helmet other than as recommended by the
manufacturer, and that helmets should not be adapted for the purpose of
fitting accessories in a way not recommended by the manufacturer.
Certified by: Intertek Testing Services Shenzhen Ltd.
West Side of 1/F and 3,4,5/F of Bldg. 1, 1-5/F of
Bldg.3, Yuanzheng Science and Technology Industri-
al Park, No.4012, Wuhe Ave. North, Bantian Street,
Longgang District, Shenzhen
This helmet is in conformity with the regulation (EU)
2016/425 and (US) CPSC 1203.
STORING YOUR HELMET:
Manufacturer: Dongguan Flying Sports Goods Co., Ltd.
Address: No. 14 Zhongkeng Nongchang Road, Shipai
Town, Dongguan, Guangdong Province, China, 523000
Made in China
