Shenzhen Dericam Technology Co.,LTD QuickInstallationGuide
10
First of all, please make sure whether your ISP (Internet Service Provider) provides a
Static WAN IP address service or a Dynamic WAN IP address service.
We divide two sections of the Remote Access Settings by Static WAN IP Service
and Dynamic WAN IP Service.
If your ISP provides Static WAN IP Service please go to Section A (Column below).
If your ISP provides Dynamic WAN IP Service please go to Section B directly (Page 11).
①Step 1, Get to know the WAN IP address of the router
Login the third party website http://www.whatismyip.com to obtain the WAN IP of the router. Then
it will tell you the WAN IP address of your router showed as below. See examples as Fig5.2, it
shows the WAN IP of the router is 183.37.19.183
Fig5.2 Get to you the WAN IP address of the router
②Step 2, Make Port Forwarding of the HTTP Port of the camera
What is port forwarding?
If you have no concept of Port Forwarding, please open the webpage
http://portforward.com/help/portforwarding.htm to learn some knowledge of Port Forwarding.
How to do port forwarding within the router
Example: The camera’s LAN IP address is http://192.168.1.35:88 ,
Firstly, login the router, goes to the menu of Port Forwarding or Port Trigger (or named
Virtue Server on some brands of router). Take Linksys brand router as an example, Login
the router, and goes to Applications & Gaming->Single Port Forwarding.
Secondly, Create a new column by LAN IP address & HTTP Port No. of the camera within the
router showed as below.
Note
Get Started Remote Access Setup
Section A: Remote Access Setup—Static WAN IP Service
