Denwa Communications DW-V-AXT Manuel utilisateur
www.denwaip.com
VIDEO
DOOR
PHONE
DW-V-AXT
DW-V-AXT
VIDEO DOOR PHONE
www.denwaip.com
TABLE OF CONTENT
Production Overview
1. Production Description
2. Features
Configuration
1. Web Login
1.1. Obtaining the IP address
1.2. Login the Web
2. Status
3. Language
4. Network configuration
5. Account
6. Push Button
7. Phone
7.1. Call Feature
7.2. Voice
7.3. Country Ringtone
8. PhoneBook
8.1. Call Log
9. Security
9.1. Web Password Modify
9.2. Web Server Certificate
10. Upgrade
10.1. Basic upgrade
10.2. Advanced Upgrade
4
4
4
6
6
6
6
7
8
8
11
14
15
15
16
18
19
19
20
20
20
22
22
23
www.denwaip.com
1. Production Description
The Denwa DW-V-AXT is the video door phone, that you can connect with your Denwa IP
Phones for remote unlock control and monitoring. You can operate the indoor handset to com-
municate with visitors via voice and video, and unlock the door if you wish. It’s applicable in
apartment, villas, Office, building and so on.
Production Overview
www.denwaip.com
·Video resolution: 320 x 240, with 20pics per second
·Wide angle lens and IR LEDs for night vision Crystal sound quality
·Remote door opening
·Integrated microphone and speaker
·Water-proof outdoor unit: IP55
·Support all the VoIP Phones
IP-PBX Features
·Video Codec: H.264
·Audio Codec: PCMU
·VAD, CNG , Echo Canceller
Network Features
·SIP v1(RFC2543), V2(RFC3261)
·Static IP/DHCP for IP configuration
·3 DTMF modes: In-Band, RFC2833, SIP INFO
·HTTP/HTTPS Web Server for Management
·NTP for Auto Time Setting
·TFTP/FTP/HTTP/HTTPS client API
Administration Features
·Auto provisioning using FTP/TFTP/HTTP/HTTPS/PnP
·Dial through IP PBX Using Phone Number
·Dial through IP PBX Using URL Address
·Conguration Managements with Web, keypad on the phone, and Auto
Provisioning
Security Features
·Support HTTPS (SSL)
·Support SRTP for Voice Data Encryption
·Support Login for Administration
·Sip Over TLS
www.denwaip.com
Configuration
1. Web Login
1.1. Obtaining the IP address
The Denwa DW-V-AXT uses a DHCP by default.
If the IP address is unknown, press the call button when the door phone is initialing, after a short
period of time, the phone will announce its IP.
(The Denwa DW-V-AXT in old firmware, use a Static IP by default, and the default IP address is 192.168.1.100)
1.2. Login the Web
Open a Web Browser, enter the corresponding IP address. Then, type the default user name and
password to log in. The default User Name and Password are as below,
User name: admin
Password: admin
www.denwaip.com
Item Function Description
Configuration
2. Status
Status, including product information, network information and Account information, can be
viewed from, Status > Basic.
To display the device’s information such as Model name,
MAC address (IP device’s physical address), Firmware
version and Hardware firmware.
To display the device’s Networking status(LAN Port),such
as Port Type(which could be DHCP/Static/PPPoE), Link
Status, IP Address, Subnet Mask, Gateway, Primary
DNS server, Secondary DNS server, Primary NTP server
and Secondary NTP server(NTP server is used to syn-
chronize time from INTERNET automatically).
Product Information
Network Information
DescriptionSections
www.denwaip.com
3. Language
Web Language can be configured from, Phone > Time/Lang.
Select the desire language from the pull-down list of Type. The default language is English.
4. Network configuration
To configure the basic network settings, go to Network > Basic.
To display device’s Account information and Registration
status (account username, registered server’s address,
Register result).
Account Information
DescriptionSections
www.denwaip.com
To display and configure LAN Port settings.
· DHCP: If selected, IP phone will get IP address, Subnet
Mask, Default Gateway and DNS server address from
DHCP server automatically.
· Static IP: If selected, you have to set IP address, Subnet
Mask, Default Gateway and DNS server manually.
· PPPoE: Use PPPoE username/password to connect to
PPPoE server.
LAN Port
DescriptionSections
To display and configure Local RTP settings.
·Max RTP Port: Determine the maximum port that RTP
stream can use.
·Min RTP Port: Determine the minimum port that RTP
stream can use.
Local RTP
DescriptionSections
For advanced settings, go to Network > Advanced
www.denwaip.com
5. Account
To display and configure TR069 settings.
·Active: To enable or disable TR069 feature.
·Version: To select supported TR069 version (version
1.0 or 1.1).
·ACS/CPE: ACS is short for Auto configuration servers
as server side, CPE is short for Customer-premise equip-
ment as client side devices.
·URL: To configure URL address for ACS or CPE.
·User name: To configure username for ACS or CPE.
·Password: To configure Password for ACS or CPE.
·Periodic Inform: To enable periodically inform.
·Periodic Interval: To configure interval for periodic
inform.
Note: TR-069(Technical Report 069) is a technical speci-
fication entitled CPE WAN Management Protocol (CWM-
P).It defines an application layer protocol for remote
management of end-user devices.
TR069
DescriptionSections
www.denwaip.com
To display and configure the specific Account settings.
·Status: To display register result.
·Display Name: Which is sent to the other call party for
displaying.
·Register Name: Allocated by SIP server provider, used
for authentication.
·User Name: Allocated by your SIP server provide, used
for authentication.
·Password: Used for authorization
To display and configure Primary SIP server settings.
·Server IP: SIP server address, it could be an URL or IP
address.
·Registration Period: The registration will expire after
Registration period, the IP phone will re-register automa-
tically within registration period.
SIP Account
SIP Server 1
DescriptionSections
To configure your SIP account, go to Account > Basic.
Table des matières
Autres manuels Denwa Communications Système d'interphone
