Denver MRD-166 Manuel utilisateur
1
CLASSICAL TURNTABLE WITH DAB/FM RADIO, CASSETTE
PLAYER & USB/SD SLOT
MRD-166 music centre with dual external speakers
Operating and Instruction Manual
2
LOCATIONS OF CONTROLS AND INDICATORS
1 Dust cover
2 Turntable
3 Mode (EQ) button
4 Menu/Info button
5 Program button
6 Record button
7 Auxiliary input
8 Delete button
9 3.5mm headphone socket
10 USB socket
11 SD/MMC socket
12 LCD display
13 DECK 1 button
14 Disk tray door
15 Play/Pause button
16 FM Tuning knob
17 Power ON/OFF/Volume
18 Skip up button
19 Standby/power light (beside display)
20 Stop button (beside display)
21 Skip down button (beside display)
22 Tape button
23 Aux button
24 CD/USB/SD button
25 Phono button
26 FM/DAB button
27 Remote control receiver
28 Deck 2 button
29 CD open/close button
3
PHONOGRAPH
30 45 rpm adaptor
31 Lift lever
32 Auto stop control
33 Tone arm lock
34 Speed selector (33/45/78
rpm)
35 Tone arm
BACK PANEL
36 Dust cover hinge
37 Line out R/L
38 Speaker jack R/L
39 FM wire antenna
40 AC power cord
REMOTE CONTROL
41 Power
42 Mute
43 Skip down button
44 Play/Pause
45 Skip up button
46 EQ
47 volume down
48 Phono
49 volume up
50 FM/DAB+
51 CD/USB/SD
52 Aux-in
53 Tape
54 Menu
55 Prog
56 Tuning/folder up
4
57 Tuning/folder down
OPERATING INSTRUCTIONS
DAB radio
Press FM/DAB button to choose DAB Mode
If the system is switched on for the first time, it will automatically enter into the DAB mode
and perform an auto scan function. During the scan the display will show “Scanning …”
together with a slide bar that indicates the progress of the scan and the amount of stations
that have been found so far. Once the scan has finished, the radio will select the first
alphanumerically found station. You can now press the “PROG”button to explore the found
stations followed by pressing the button to select the station of your choice.
Phono Operation
1. Press the volume/power ON/OFF knob to turn the equipment on.
2. Use the function selector to select PHONO mode.
NOTE: Should your record stop before the last track finishes, set the auto stop control to
OFF. Your record will now play to the end, but you will have to stop the turntable rotation
manually. (Return the tone arm to its rest manually and if the turntable is still rotating, switch
off the unit via the volume control knob. Then set the auto stop control back to ON.)
Encoding
1. Set the function button to PHONO, CD, AUX or Cassette mode.
2. Press the record REC button one time to read the memory device, then the USB
or SD icon will flash on the LCD display,when set the function button to CD mode.
Press the record REC button two times to read the Memory device, then the
USB or SD icon will flash on the LCD display,when set the function button to
PHONO,AUX or Cassette mode.
3. Press the skip up or skip down button to select the desired mode (USB
or SD) for encoding/recording, then press the record REC button again to
confirm.
5
(You can skip this step if only a USB drive or an SD/MMC card is inserted.)
4. The system will start in encoding/recording mode after a few seconds.
5. Start playback of the music you want to encode/record.
6. To finish encoding/recording, press the stop button. The display will show “END” and
return to PHONO mode.
NOTE:
The recording speed is 1:1. Recording time is governed by how long it takes for the
music to play to its end.
The recording format is preset at the MP3 bit rate of 128 Kbps.
CD & Cassette Operation
1. Press the VOLUME knob to turn the equipment on.
2. Choose the mode you wish to use (CD or Cassette)
3. Start playback of the music
The USB Port and SD Card Slot
Playback of music in MP3/WMA format via USB device or memory card
The system is able to decode and playback all MP3/WMA files stored in the memory
media connected to the USB port or SD/MMC card slot.
1. Press the VOLUME knob to turn on the equipment.
2. Set the function selector to CD/USB/SD mode. (If you have both a USB device and a
memory card inserted, press the same button to toggle between CD/USB and SD
mode.) The system will start reading the storage medium automatically after mode
selection and will display the total number of folders and MP3/WMA files.
3. The system will then start audio playback from the media storage device (USB or SD
card) automatically.
The auxiliary input
1. Press the VOLUME knob to turn the equipment on.
2. Use the function selector to select AUX mode, then connect the external audio device
6
(such as a CD player) to the AUX IN socket on the front of the equipment. The audio
signal from the external audio device will now be played through the system.
7
Please notice - All products are subject to change without any notice. We take reservations
for errors and omissions in the manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S
Electric and electronic equipment contains materials, components and substances that can
be hazardous to your health and the environment, if the waste material (discarded electric
and electronic equipment) is not handled correctly.
Electric and electronic equipment is marked with the crossed out trash can symbol, seen
above. This symbol signifies that electric and electronic equipment should not be disposed
of with other household waste, but should be disposed of separately.
All cities have established collection points, where electric and electronic equipment can
either be submitted free of charge at recycling stations and other collection sites, or be
collected from the households. Additional information is available at the technical
department of your city.
Hereby, Inter Sales A/S declares that the radio equipment type MRD-166 is in compliance
with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at
8
the following internet address: www.denver-electronics.com and then click the search ICON
on topline of website. Write model number: MRD-166. Now enter product page, and RED
directive is found under downloads/other downloads.
Operating Frequency Range: FM:87.5-108MHz DAB:168-240MHz
Max Output Power: 2*2W
DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics
1
KLASSISCHER PLATTENSPIELER MIT DAB/UKW-RADIO,
KASSETTENDECK UND USB/SD-ANSCHLUSS
Musikzentrum MRD-166 mit zwei externen
Lautsprechern
Bedienungsanleitung
2
BEDIENELEMENTE
1 Schutzhaube
2 Plattenspieler
3 Modus (EQ)
4 Menü/Info
5 Programm
6 Aufnahme
7 Aux-Eingang
8 Löschen
9 3,5 mm Kopfhörerbuchse
10 USB-Port
11 SD/MMC-Kartensteckplatz
12 LCD-Display
13 Kassettendeck 1
14 CD-Laufwerk
15 Wiedergabe/Pause
16 UKW-Sendersuche
17 Ein/Aus/Lautstärke
18 Sprung vorwärts
19 Standby/Licht (neben Display)
20 Stopp (neben Display)
21 Sprung zurück (neben Display)
22 Kassette
23 Aux-Eingang
24 CD/USB/SD
25 Phono
26 UKW/DAB
27 Empfänger Fernbedienung
28 Kassettendeck 2
29 CD-Laufwerk öffnen/schließen
Table des matières
Langues :
Autres manuels Denver Système stéréo
Denver
Denver MCB-600 Manuel utilisateur
Denver
Denver MCU-5501 Manuel utilisateur
Denver
Denver MCA-160 Manuel utilisateur
Denver
Denver MDA-250 Manuel utilisateur
Denver
Denver MCI-103 Manuel utilisateur
Denver
Denver MRP-141 Manuel utilisateur
Denver
Denver MCD-30 Manuel utilisateur
Denver
Denver MCA-171 Manuel utilisateur
Denver
Denver MRP-161 Manuel utilisateur
Denver
Denver MC-5230DAB+ Manuel utilisateur
Denver
Denver MC-7150 Manuel utilisateur
Denver
Denver MCB-700 Manuel utilisateur
Denver
Denver MCA-54 Manuel utilisateur
Denver
Denver MMP-360 Manuel utilisateur
Denver
Denver MCU-5301 Manuel utilisateur
Denver
Denver MCD-63 Manuel utilisateur
Denver
Denver MC-5400 Manuel utilisateur
Denver
Denver MCA-190 Manuel utilisateur
Denver
Denver MDA-260 Manuel utilisateur
Denver
Denver MRP-131 Manuel utilisateur
