Denver DSB-4010 Manuel utilisateur
Sound Bar User Manual
Operating Introduction
a. Place the Soundbar on a flat and solid surface. Alternatively, you can wall mount the Soundbar with the
screws provided. You can hear audio through the Soundbar using ONE of the following connections.
1. onnect to your television using one of the connectors.
HDMI-AR connector on the TV (using an HDMI cable)
Optical output connector on the TV (using an optical cable)
Headphone jack (using the supplied audio cable with 3.5mm plug)
2. onnect to a Bluetooth enabled device.
3. onnect to a USB drive (stick) loaded with music files
b. Illustration of the Soundbar connectors for different connections
EN EN
OPTI AL IN OPTI AL IN
LINE IN LINE IN
D 19V IN D 19V IN
Note: To hear TV audio through the Soundbar via Optical or HDMI- RC connection,
make sure that the LINE IN jack on the Soundbar is not plugged in.
c. The control panel on the Soundbar
Press the /MODE button to switch the Soundbar on or to standby.
When the LINE IN jack is plugged in, press and hold the /MODE button to
toggle the sources: Line In -> Bluetooth -> USB Drive.
When the LINE IN jack is not plugged in, press and hold the /MODE button to
toggle the sources: Bluetooth -> USB Drive -> HDMI- RC -> Optical In.
Press the / MUTE button to start or pause play.
Press and hold the / MUTE button to mute or restore volume.
Press the VOL+/ button to increase volume.
Press and hold the VOL+/ button to skip to next audio file during USB play.
Press the VOL-/ button to decrease volume.
Press and hold the VOL-/ button to skip to previous audio file during USB
play.
d. Source selection shown on the LED display
Line In source
Bluetooth source
USB source when connecting to a USB drive. USB
source cannot be selected if no USB drive is
connected.
HDMI-AR source
Optical In source
Notes:
“bt” (Bluetooth) flashes if the Soundbar is not paired or connected to a Bluetooth device.
“bt (Bluetooth) lights up if the Soundbar is paired or connected to a Bluetooth device.
When the Soundbar is switched to standby, the red light is turned on.
e. Remote control buttons
Switch the product on or to standby
Mute or restore volume
Increase volume
Decrease volume
Skip to previous audio file during USB play
Skip to next audio file during USB play
Start or pause play during USB play
Repeat audio play during USB play
EQ Select different preset sound settings
MODE Select an audio source
Press the EQ button to toggle different preset sound
settings shown below.
Display EQ mode
Eq0 Normal
Eq1 Rock
Eq2 Pop
Eq3 lassic
Eq4 Jazz
Eq5 ountry
Technical Specifications
Power/Amps:: Input: A 110~240V, 50/60Hz; Output: D 19V, 1.5A
Power consumption: 36W/Hour
Operating frequency range: 40hz-16Khz
Max output power: 40W (RED Standard)
Soundbar measurement: 80 x 6 x 6cm
Bluetooth name: DSB-4010
Packing List
Soundbar
User manual
Audio cable (3.5 to 3.5mm)
Screws x 2
Remote control with batteries
Power adapter
Please notice - All products are subject to change without any notice. We take
reservations for errors and omissions in the manual.
ALL RIGHTS RESERVED, OPYRIGHT DENVER ELE TRONI S A/S
Electric and electronic equipment contains materials, components and
substances that can be hazardous to your health and the environment, if the
waste material (discarded electric and electronic equipment) is not handled
correctly.
Electric and electronic equipment is marked with the crossed out trash can
symbol, seen above. This symbol signifies that electric and electronic equipment
should not be disposed of with other household waste, but should be disposed of
separately.
All cities have established collection points, where electric and electronic
equipment can either be submitted free of charge at recycling stations and other
collection sites, or be collected from the households. Additional information is
available at the technical department of your city.
Hereby, Inter Sales A/S declares that the radio equipment type DSB-4010 is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address: www.denver-
electronics.com and then click the search ICON on topline of website. Write
modelnumber: SB-4010.Now enter product page, and red directive is found under
downloads/other downloads
Operating Frequency Range: 40hz-16Khz
Max Output Power: 40W
Table des matières
Autres manuels Denver Système de haut-parleurs
Denver
Denver BTS-300 Manuel utilisateur
Denver
Denver BTS-300 Manuel utilisateur
Denver
Denver IFI-160 Manuel utilisateur
Denver
Denver DJ-200 Manuel utilisateur
Denver
Denver DSS-7020 Manuel utilisateur
Denver
Denver DSB-2010MK2 Manuel utilisateur
Denver
Denver DSB-4020 Manuel utilisateur
Denver
Denver DSB-2010 Manuel utilisateur
Denver
Denver TP04-180200E Manuel utilisateur
Denver
Denver DSB-4020 Manuel utilisateur
Manuels Système de haut-parleurs populaires d'autres marques
Sondpex
Sondpex Active Speaker System and Digital Music... Manuel utilisateur
JVC
JVC NX-PN7 Manuel utilisateur
Marshall Amplification
Marshall Amplification AR-DM61-BT Manuel utilisateur
Yamaha
Yamaha NX-A01 - Speaker Sys Manuel utilisateur
SE Audiotechnik
SE Audiotechnik I-LINE Manuel utilisateur
Gemini
Gemini WRX-843 Series Manuel utilisateur