Introduction
Thank you for choosing one of our precision instruments. Your balance is
designed and manufactured to the most rigorous standards in order to give
you years of service. First, check the contents of the shipping carton. You
should find the following:
• Manual • Balance • AC Adapter • Cover Pan
Next, follow the instructions for installing your balance.
Now you’re ready to begin using your balance. To take advantage of its many
features, carefully read your operating manual. It contains step-by-step pro-
cedures, examples, and other vital information.
Finally, remember to return your completed warranty card within ten days and
to record all purchase information in the space provided on the back cover
of your manual.
Warning: Use of this product in a manner not specified by the manufacturer
may impair any safety protection provided by the equipment!
Specifications
Model XP-300 XP-600 XP-1500 XP-3000
Range 300g 600g 1500g 3000g
Readability 0.01g 0.02g 0.05g 0.1g
Linearity ±0.01g ±0.02g ±0.05g ±0.1g
Pan 5” x 7” 5” x 7” 5” x 7” 5” x 7”
Dimensions (127 x 178mm) (127 x 178mm) (127 x 178mm) (127 x 178mm)
Permissible
Calibration 200g 500g 1000g 2000g
Weights
Temperature 15 - 40 °C
Humidity 80% for temperature to 31°C, decreasing linearly to 50% relative
humidity at 40°C
Altitude 3000m
Common Specifications: Unit dimensions (L x W x H) 8.2 x 8.3 x 2.7” (208 x 211 x 69mm);
Net Weight: 3.75 lbs. (1.7 kg). Power: 15 VDC, 100mA, AC adapter included. Mains sup-
ply voltage fluctuations not to exceed ±10% of nominal supply voltage. Equipment id
suitable for continuous operation with AC adapter/charger. Pollution degree:2;
Installation category: II; Sound Pressure Level emitted by equipment does not exceed
ambient noise. Storage/Transport Temperature: -20° – +40°C.
NOTE: The battery is not a user serviceable part. If the battery does not
recharge with use of AC adapter, contact an authorized service technician.
Caution: Use AC adapter/charger supplied with unit only!
Consult Denver Instrument Company for replacement.
!
!
Maintenance and Troubleshooting
Display Shows: Cause: Remedy:
I/O key pressed Press the I/O key.
to turn OFF Displays.
Power cord not Connect cord.
connected.
No power to outlet or Check power supply.
improper voltage. Check power supply
and voltage switch.
Temporary fault Disconnect and reconnect
power cord. (Wait at least five
seconds before reconnecting.)
Weight exceeds Reduce weight.
balance capacity.
Pan obstructed. Move balance.
Air movement Move balance.
around balance.
Balance operating error. Re-calibrate balance.
Pan obstructed. Check pan placement.
Cleaning Instructions
The exterior surfaces of the product may be cleaned with a mild water-
based detergent and a lint-free nonabrasive cloth. Alternatively, isopropyl
alcohol may be used. Do not immerse the product in any liquid.
Warning
Never lift balance by the weighing pan as this may cause
damage to internal mechanisms.
Always lift and transport the balance by its base.
Note
This unit contains no user serviceable parts.
All replacement parts should be obtained from the
manufacturer. Please refer to the inside front cover
of this manual for the phone number of your sales
and service representative.
(Blank Screen)
(No stability indicator)
!
