DeLonghi TRH0715 Manuel utilisateur

IMPORTANT

SAFEGUARDS

When using any electrical appliance, some basic safety

precautions should always be observed to reduce the risk

of re, electric shock, and/or injury to persons. Read all in-

structions carefully before using the appliance. Specically:

Danger!

Failuretoobservethewarningmayresult inlife threatening

injury by electric shock.

- Do not operate any heater with a damaged

cord or plug or after the heater malfun-

ctions, has been dropped or damaged in any

manner.

If heater has leaked any oil, discontinue

using the heater and contact the service

centre as indicated in the instruction leaet.

Return heater to authorized service facility

for examination, electrical or mechanical

adjustment, or repair.

- This heater is not intended for use in bathro-

oms, laundry areas, or similar indoor loca-

tions. Never position the appliance where it

may fall into a bathtub or come in contact

with water.

- Use this appliance only as described in this

manual. Any other use not indicated by the

manufacturer may cause re, electric shock,

or injury to persons.

- CAUTION: To prevent electric shock, make

sure the wide prong of the plug is inserted

in the wide slot of the outlet.

Important!

Failure to observe the warning could result in injury or

damage to the appliance.

- The appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless

they have been given supervision or in-

struction concerning use of the appliance by

a person responsible for their safety.

Children should be supervised to ensure

that they do not play with the appliance.

- Extreme caution is necessary when any he-

ater is used by or near children or invalids

and whenever the heater is left operating

and unattended.

- Do not wrap the cord around the appliance

immediately after use.

- To prevent current overload and blown fu-

ses, make sure that no other appliance is

plugged into the same outlet or into ano-

ther outlet wired into the same circuit.

- If the power cord is damaged, to reduce the

risk of malfunction it must be replaced by

the manufacturer, its service agent, or a li-

censed and qualied professional.

- Do not use this appliance with an extension

cord or outlet strip. Connect the appliance

directly to a suitable outlet.

Danger of burns!!

Failure to observe the warning could result in burns or

scalds.

- This appliance gets very hot when in use.

To prevent burns, do not touch hot surfa-

ces with bare skin. Use the handle when

moving the appliance. Keep all ammable

materials, such as furniture, pillows, bed-

ding, paper, clothing, and curtains at least

3 feet (90 cm) from the front and top of the

appliance, also avoid contact with the sides

and back.

- Do not run the power cord under carpeting.

Do not cover cord with throw rugs, runners,

or the like. Keep the cord away from any

passageways where it could be tripped over.

- Do not insert or allow foreign objects to get

into the air intake or air outlet grille, as this

may cause electric shock or re, or damage

the appliance.

- To prevent a possible re, do not block air

intake or air outlet grille in any way. Do not

use the appliance on soft surfaces, such as

beds, where the openings may become blo-

cked.

- Do not cover the appliance while it is fun-

ctioning in order to avoid overheating and

the risk of re.

- The internal parts of the appliance can

become very hot or produce sparks during

operation. Do not use the appliance in areas

where gasoline, paints, or other ammable

liquids are used or stored.

- It is normal for heater’s plug and cord to

feel warm to the touch. However, an exces-

sively hot or deformed plug or cord is not

normal and may be the result of a defective

electrical outlet. Defective outlets must be

replaced before using the heater. Plugging

the heater into a worn outlet may result in

overheating of the power cord or may cause

the risk of re.

- Do not place the heater near a bed because

objects such as pillows or blankets can fall

o the bed and be ignited by the heater.

Please note:

This symbol indicates recommendations and important

information for the user.

- If your radiator is equipped with a

polyethylene tape used as a carry handle,

remove it before connecting appliance to

the outlet.

- Always disconnect the plug from the power

outlet when the appliance is not in use.

- Do not use the appliance outdoors.

- To completely turn o the appliance, push

the ON/OFF button, and then unplug the

heater.

- Connect to properly polarized outlets only.

- Make sure that the plug is fully inserted

into the outlet. Wall outlets may deteriorate

with time, so check the plug periodically for

signs of overheating or deformation. If the

outlet has deteriorated, stop using it and

have it repaired.

- Check that neither the appliance nor the po-

wer cord have been damaged during ship-

ping.

- Make sure that no styrofoam or other pa-

cking materials remain in the appliance.

- Make sure that no pieces of polystyrene or

other packaging material have been left

between one element of the appliance and

another. It may be necessary to pass over

the appliance with a vacuum cleaner.

- The rst time the appliance is used, run it at

the maximum power for at least two hours.

During this time, ventilate the room thorou-

ghly to eliminate the “new” smell released

by the appliance. It is completely normal for

the appliance to emit“creaking”sounds the

rst time it is run.

- Extreme caution is necessary whenever the

heater is left operating unattended.

- Do not open the appliance. No user-service-

able parts inside.

SAVE THESE

INSTRUCTIONS

THIS PRODUCT IS FOR HOUSEHOLD USE

ONLY

DESCRIPTION

(see g. 1)

AThermostat

B Switches

C Cord holder

USE

“Easy wheel”system

Turn the radiator upside-down on a rug or a soft surface

in order to prevent damaging the paint nish. Fully unfold

the castors by turning them outwards (see gure).

Turn the radiator back to its upright position.

Please note: Always operate the heater in upright

position only (wheels on the bottom, controls on top). Any

other position could create hazardous situation.

Watts economizer

For more economical use, the Min. or Med. Watt switches

may be used individually, after unit has reached the ope-

rating temperature.

With pilot lights ON, the heater is ON.

Location

Place heater on the oor beneath the coldest window in

the room, or any other location. Your heater will reduce

the eect of cold drafts. The heater should not be placed

immediately below a power outlet. Do not use this radiator

in rooms with a oor area of less than 43 square feet (4

sq. m.).

Connection

The radiator should be connected to a properly polarized

A/C 120 V household outlet in perfect working conditions.

Keep loose clothing or bedding, furniture and ammable

material away from the heater’s wall outlet.

Turning on two-switch models

Turn the thermostat clockwise to its maximum position.

Push down both switches. The switch lights stay on in-

dependently of the thermostat cycling. When room rea-

ches the desired temperature, turn the thermostat knob

counter-clockwise very slowly and carefully until you hear

a click. This should set your heater to maintain the desired

temperature by cycling on and o as required.

Please note: The heater normally requires about 15

minutes to reach the desired temperature.

Use of thermostat

The thermostat operates according to room air temperatu-

re, rather than radiator temperature.

Turning it counter-clockwise to smaller numbers would

decrease the temperature; clockwise to greater numbers

would increase the temperature.

Antifreeze function

Turn the thermostat dial to the position and push the

switches on.The appliance will maintain a minimum room

temperature of approximately 41°F (5°C), thus preventing

freezing while conserving energy.

Please note:To completely shut the heater o, MIN/

MED switches must be set in the“0”position.

Your product is equipped with a polarized alter-

nating current line plug (a plug having one blade

wider than the other). There is only one way it can

be plugged into a power supply. This is a safety fea-

ture. If you are unable to insert the plug fully into

the outlet, try again by turning it the other way. If

it would still not go in, it is probably due to an obso-

lete outlet which should be replaced. Do not temper

with the plug or outlet to defeat the purpose of this

safety mechanism.

A safety device

A safety device switches the heater o in the event of

overheating. To restart the heater, call the nearest Service

center.

MAINTENANCE AND SERVICE

Always unplug the heater from the power outlet and allow

the radiator to cool. Wipe radiator with a soft damp cloth;

do not use detergents and abrasives. Should the radiator

not be in use over a certain length of time, roll the cable

around the holder and store it in a dry place (see g. on

front page).

This appliance has been built to last for many years of trou-

ble-free service. In case of malfunction or doubt, do not try

to repair the heater by yourself: this might increase the risk

of re and electric shock. Contact the De'Longhi Customer

Service.

TROUBLESHOOTING

PROBLEM CAUSE SOLUTION

The display doesn't work Be sure it is plugged in and that the

electrical outlet is working

Check for any obstruction

The switches are in the OFF position

The thermostat may be set too low

Plug into the power outlet

Remove the obstruction. Let the appliance

cool down then reinsert the plug into the

mains. If the appliance doesn't work please

contact the

De'Longhi Customer Service

Switch on the appliance

Turn the thermostat to a higher setting

until the heater restarts

Please check it is correctly positioned

Autres manuels pour TRH0715

Autres manuels DeLonghi Chauffage

DeLonghi

DeLonghi DCH5915ER Manuel utilisateur

DeLonghi

DeLonghi HCA324FS Manuel utilisateur

DeLonghi

DeLonghi TRRSE Series Manuel utilisateur

DeLonghi

DeLonghi FAN HEATER Manuel utilisateur

DeLonghi

DeLonghi HEX60 Series Manuel utilisateur

DeLonghi

DeLonghi TRD40615E-6A Manuel utilisateur

DeLonghi

DeLonghi TRD40615EBK Manuel utilisateur

DeLonghi

DeLonghi HFX30 Series Manuel utilisateur

DeLonghi

DeLonghi CERAMIC FAN HEATER Manuel utilisateur

DeLonghi

DeLonghi Holmo Fluid Manuel utilisateur

DeLonghi

DeLonghi TRH0715ECA Manuel utilisateur

DeLonghi

DeLonghi TRD40615T-6A Manuel utilisateur

DeLonghi

DeLonghi RCH150 Manuel utilisateur

DeLonghi

DeLonghi HVY1030 Manuel utilisateur

DeLonghi

DeLonghi TCH8093ER Manuel utilisateur

DeLonghi

DeLonghi TRRS0715ECA Manuel utilisateur

DeLonghi

DeLonghi Electric oil filled radiator Manuel utilisateur

DeLonghi

DeLonghi DCH7093ERBCA Manuel utilisateur

DeLonghi

DeLonghi HX65L22 Manuel utilisateur

DeLonghi

DeLonghi FAN HEATER Manuel utilisateur

DeLonghi

DeLonghi HWB5050T Manuel utilisateur

DeLonghi

DeLonghi DL2401TF Manuel utilisateur

DeLonghi

DeLonghi TRN0812T Manuel utilisateur

DeLonghi

DeLonghi HVE 3332 Manuel utilisateur

Manuels Chauffage populaires d'autres marques

oventrop

oventrop Regucor Series Manuel utilisateur

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuel utilisateur

ELMEKO

ELMEKO ML 150 Manuel utilisateur

BN Thermic

BN Thermic 830T Manuel utilisateur

KING

KING K Series Mode d’emploi

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guide de démarrage rapide

Well Straler

Well Straler RC-16B Manuel utilisateur

EUROM

EUROM 333299 Manuel utilisateur

Heylo

Heylo K 170 Manuel utilisateur

Eterna

Eterna TR70W Manuel utilisateur

Clarke

Clarke GRH15 Mode d’emploi

IRSAP

IRSAP The Radiator Company Ovali Manuel utilisateur

Empire Heating Systems

Empire Heating Systems WCC65 Manuel utilisateur

Wetekom

Wetekom 92 86 43 Manuel utilisateur

Desa

Desa SPC170-F Manuel utilisateur

Watlow

Watlow Watrod Electric Tubular Heaters Manuel utilisateur

Haverland

Haverland ECO-DRY GPS Series Manuel de la liste des pièces

Stelpro

Stelpro ASILVC2060 Series Manuel utilisateur