Dell PowerApp .cache 100 Manuel utilisateur
This document provides information on installing tab covers on Dell PowerApp 100
appliances.
To install tab covers on a Dell PowerApp 100 system, perform the following steps for
each tab.
CAUTION: The system’s 2-post flush mount slide-rail mechanism does not have
a safety stop. Use care when sliding the system in and out of the rack; the sys-
tem could fall out of the rack, possibly resulting in bodily injury and damage to
the system.
1. Push the system completely into the rack.
2. Center the thumbscrew on the tab cover with the clearance hole on the server
tab.
3. Align the tab cover slot with the opening on the server tab (see Figure 1).
4. Hold the tab cover firmly onto the server tab and engage the thumbscrew with
the receiving fastener on the slide bracket.
This completes the installation of the tab cover.
server tab
thumbscrew
____________________
Information in this document is subject to change without notice.
© 2000 Dell Computer Corporation. All rights reserved. Printed in the U.S.A.
Trademarks used in this text: Dell, the DELL E COM logo, and PowerApp are trademarks of Dell
Computer Corporation. Other trademarks and trade names may be used in this document to
refer to either the entities claiming the marks and names or their products. Dell Computer
Corporation disclaims any proprietary interest in trademarks and trade names other than its own.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Dell Accessoires
Dell
Dell Latitude L400 Advanced Port Replicator Manuel utilisateur
Dell
Dell DJ MP3 Manuel utilisateur
Dell
Dell PW7018LC Manuel utilisateur
Dell
Dell 2700R Manuel utilisateur
Dell
Dell PH45W17-BA Manuel utilisateur
Dell
Dell Power Companion PW7015MC Manuel utilisateur
Dell
Dell Premium Active Pen Manuel utilisateur
Dell
Dell PowerVault 114T 2U Feuille d'instructions
Dell
Dell Active Pen PN557W Manuel utilisateur
Dell
Dell C3504 Manuel
