3
TO AVOID SEVERE PERSONAL INJURY OR PROPERTY DAMAGE
BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD READ AND STUDY THIS MANUALTOUNDERSTANDAND
FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. FAILURE TO FOLLOW WARNINGS COULD RESULT IN DEATH OR
SERIOUS INJURY. KEEP THESE INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE.
SAFETY INSTRUCTIONS:
EYE PROTECTION which conforms to ANSI/ CE specifications and provides protection against flying particles both from the
FRONT and SIDE should ALWAYS be worn by the operator and others in the work area when connecting to air supply,
loading, operating or servicing this tool. Eye protection is required to guard against flying fasteners and debris, which
could cause severe eye injury.
The employer and/or user must ensure that proper eye protection is worn. Eye protection equipment must conform to
the requirements of the ANSI Z87.1 and 89/686/EEC, and provide both frontal and side protection. NOTE: Non‐side
shielded spectacles and face shields alone do not provide adequate protection.
CAUTION: Additional Safety Protection will be required in some environments. For example, the working area may include
exposure to noise level which can lead to hearing damage. The employer and user must ensure that any necessary hearing
protectionisprovidedandusedbytheoperatorandothersintheworkarea.Some environments will require the use of head
protection equipment. When required, the employer and user must ensure that head protection conforming to ANSI Z89.1/ CE is
used.
AIR SUPPLY AND CONNECTIONS
Do not use oxygen, combustible gases, or bottled gases as a power source for this tool as tool may explode possibly
causing injury.
Do not use supply sources which can potentially exceed 200 PSI (14 kg/cm2) as tool may burst, possibly causing injury.
SAFETY INSTRUCTIONS
Alwayswearbreathingprotectionduetoparticlesthatcouldbecomesuspendedintotheair.
Alwaysoperatethetoolinasafemannerandbecarefulforthesafetyofothersintheworkareaaroundyou.
Alwayskeepthetoolproperlymaintained.
Alwayskeephandsawayfrommovingparts.
Alwaysholdthetoolawayfromclothingandhairtoavoidthepossibilityofbecomingentangled.
Alwayskeeptoolawayfromanyelectricalsourcetoavoidelectricshockbeingtransmittedthroughthetool’saluminum
housingoranyotherportionofthetoolorit’sattachments.
Neverleavethetoolconnectedtotheaircompressorwhennotinuse.
Neveroperatethetoolnearflammablesubstances.
OnlyuseRepairPartsandAttachmentsrecommendedbythemanufacturerofthistool.
MJH‐A1ManualFeb26,2021
