Dekolink Deko2119 Manuel utilisateur

ABOUT THIS MANUAL

This Product Manual provides the following information:

•Description of the Mini-Repeater

•Procedures for setup, configuration and checking the proper operation of

the Mini-Repeater

•Maintenance and troubleshooting procedures

TO WHOM IT IS INTENDED:

This Product Manual is intended for experienced technicians and engineers. It is

assumed that the customers installing, operating, and maintaining Dekolink Mini-

Repeaters are familiar with the basic functionality of Repeaters.

NOTICE Confidential - Authorized Customer Use

This document may be used in its complete form only and is solely for the use of

Dekolink Wireless Ltd. employees and authorized Dekolink Wireless Ltd. channels

or customers. The material herein is proprietary to Dekolink Wireless Ltd. Any

unauthorized reproduction, use or disclosure of any part thereof is strictly

prohibited.

All trademarks and registered trademarks are the property of their respective

owners.

DISCLAIMER OF LIABILITY

Contents herein are current as of the date of publication. Dekolink Wireless Ltd.

reserves the right to change the contents without prior notice. The information

furnished by Dekolink Wireless Ltd. in this document is believed to be accurate

and reliable. However, Dekolink Wireless Ltd. assumes no responsibility for its

use. In no event shall Dekolink Wireless Ltd. be liable for any damage resulting

from loss of data, loss of use, or loss of profits and Dekolink Wireless Ltd. further

disclaims any and all liability for indirect, incidental, special, consequential or

other similes damages. This disclaimer of liability applies to all products,

publications and services during and after the warranty period.

EXCLUSIVE REMEDIES

The remedies provided herein are the Buyer’s sole and exclusive remedies.

Dekolink Wireless Ltd. shall not be viable for any direct, incidental, or

consequential damages, whether based on contract, tort, or any legal theory.

Dekolink Wireless

International Headquarters

16 Bazel St., Kiryat-Arieh,

Petah-Tikvah 49001

ISRAEL

Tel.: +972 3 918-0180

Fax: +972 3 918-0190

E-mail: marketing@dekolink.com

Website: www.dekolink.com

Dekolink USA, Inc.

Americas Group

550 Club Drive

Ste. 470

Montgomery, Texas 77316-3094, USA

Tel: +1-936-582-7100

Fax: +1- 936-582-7108

E-mail: [email protected]

Website: www.dekolink.com

Publication No.: 313-2006 Rev. 2.01S

Page b Proprietary Data Pub. 308-2005 Rev. 2.00S

SAFETY WARNINGS AND ADMONISHMENTS

Throughout this manual, important safety warnings and admonishments are included to

warn of possible hazards to persons or equipment. A safety warning identifies a possible

hazard and then describes what may happen if the hazard is not avoided. The safety

warnings – in the form of Dangers, Warnings and Cautions must be followed at all times.

These warnings are flagged by the use of a warning icon, usually the triangular alert icon

seen below. The exclamation point within the triangular alert icon is intended to warn the

operator or service personnel of operation and maintenance from factors elating to the

product and its operating environment, which could pose a safety hazard.

GENERAL SAFETY WARNINGS CONCERNING USE OF THIS SYSTEM

Always observe standard safety precautions during installation, operation and

maintenance of this product. Only a qualified and authorized personnel should carry out

adjustment, maintenance or repairs to the components of this equipment.

Danger: Electrical Shock

This equipment is intended to be installed indoor. Wet conditions increase the

potential for receiving an electric shock when installing or using electrically

powered equipment. To prevent electrical shock when installing or modifying

the system power wiring, disconnect the wiring at the power source before

working with uninsulated wires or terminals.

Caution: RF Exposure

Installation of an antenna must comply with the FCC RF exposure

requirements. See paragraph 4.9.

PRODUCT MANUAL MINI-REPEATER DEKO2119 DEKOLINK WIRELESS LTD.

Pub. 313-2006 Rev. 2.01S Proprietary Data Page c

GLOSSARY The following is a list of abbreviations and terms used throughout this document.

Abbreviation/Term Definition

AGC Automatic Gain Control

ALC Automatic Level Control

AMP (P_amp) Amplifier (power amplifier)

ATR Acceptance Test Results

BTS Base Transceiver Station

DAS Distributed Antenna System

DL Downlink

Downlink The path covered from the Base Transceiver

Station (BTS) to the subscribers/service area

via the Repeater

ESD Electro-Static Discharge

IF Intermediate Frequency

MN Model Number

NMT Network Management Tool

PCS Personal Communications Service

PLL Phased Locked Loop

RF Radio Frequency

RMS Repeater Management System

SALC Smart-ALC (Automatic Level Control)

SIM Subscriber Identification Module

SQE Signal Quality Estimate

UL Uplink

Uplink The path covered from the subscribers/service

area to the Base Transceiver Station (BTS)

via the Repeater

VSWR Voltage Standing Wave Ratio

DEKOLINK WIRELESS LTD. MINI-REPEATER DEKO2119 PRODUCT MANUAL

Pub. 313-2006 Rev. 2.01S Proprietary Data Page i

CONTENTS

1. INTRODUCTION..................................................................................... 1

1.1 General........................................................................................................................ 1

1.2 Applications................................................................................................................. 1

1.3 Main Features.............................................................................................................. 2

1.4 Description .................................................................................................................. 2

1.5 Controls and Indicators............................................................................................... 3

1.6 Model and Frequencies................................................................................................ 5

1.7 Unpacking and Inspection............................................................................................ 6

2. FUNCTIONAL DESCRIPTION................................................................ 7

2.1 General........................................................................................................................ 7

3. SPECIFICATIONS................................................................................... 9

3.1 General........................................................................................................................ 9

3.2 Electrical Specifications............................................................................................... 9

3.3 General Specifications ................................................................................................. 9

3.4 Mechanical Specifications.......................................................................................... 10

3.5 Environmental Specifications..................................................................................... 10

3.6 Connectors ................................................................................................................ 11

4. INSTALLATION AND OPERATION..................................................... 12

4.1 General...................................................................................................................... 12

4.2 Safety Instructions..................................................................................................... 12

4.3 Installation Site Considerations ................................................................................. 12

4.4 Tools and Materials................................................................................................... 12

4.5 Installation Procedures.............................................................................................. 12

4.6 Antenna Installation Site – Considerations................................................................. 14

4.7 Connection to Antennas and to Power........................................................................ 14

4.8 Operating Procedures................................................................................................ 15

4.9 Donor Antenna Alignment......................................................................................... 16

4.10 RF Exposure Warning............................................................................................. 17

5. DUAL-BAND MINI-REPEATERS CONFIGURATION.......................... 18

6. DAISY-CHAINED DUAL-BAND MINI-REPEATERS............................ 19

7. SETUP (monitoring and control)............................................................. 20

7.1 General...................................................................................................................... 20

7.2 Local Mode Connection............................................................................................. 20

7.3 Repeater Management System (RMS)........................................................................ 21

7.4 RMS650 – Main Screen Description........................................................................... 23

7.5 Selecting Deko2119.................................................................................................... 24

7.6 RMS 650 Screens Operation...................................................................................... 27

7.7 Selecting the Operating Sub-Bands............................................................................ 30

7.8 Finalizing the Operation Procedures.......................................................................... 34

7.9 Alarms Screen ........................................................................................................... 35

7.10 Configuration Screen............................................................................................... 36

7.11 Exiting the RMS Software........................................................................................ 37

PRODUCT MANUAL MINI-REPEATER DEKO2119 DEKOLINK WIRELESS LTD.

Page ii Proprietary Data Pub. 313-2006 Rev. 2.01S

8. MAINTENANCE AND TROUBLESHOOTING...................................... 38

8.1 General ......................................................................................................................38

8.2 Periodic Maintenance.................................................................................................38

8.3 Failure Display...........................................................................................................38

8.4 Status LEDs Troubleshooting.....................................................................................38

8.5 Mini-Repeater Alarms and Troubleshooting...............................................................40

8.6 Dry-Contact Alarms...................................................................................................44

Appendix A: Dekolink Wireless Limited Warranty ..................................... 45

DEKOLINK WIRELESS LTD. MINI-REPEATER DEKO2119 PRODUCT MANUAL

Pub. 313-2006 Rev. 2.01S Proprietary Data Page 1

1. INTRODUCTION

1.1 GENERAL

Mini-Repeater Deko2119 is a PCS Block Selective RF Mini-Repeater that

amplifies signals bi-directionally between base stations and mobile handsets, in

cellular and other wireless systems (see Figure 1).

Deko2119 provides high selectivity capability by employing an advanced

up/down conversion and Intermediate Frequency (IF) SAW filtering

architecture.

This product features the Smart ALC algorithm that provides "plug-and-play"

capability for fast response and immediate solution to your coverage needs,

while preventing degradation in network performance. This repeater is provided

with a SAW Switcher that can be configured with pre-determined different

frequency blocks so as to enable complex frequency plans, as well as providing

two units in one Repeater.

Mini-Repeater Deko2119 is provided with 80 dB gain as default. Some units

are configured with 70 dB gain only. This manual is valid for both

configurations.

In addition, Deko2119 features a special configuration for dual-band coverage

using a Combiner. It enables interconnecting with another Mini-Repeater, such

as Deko2408, to provide coverage in the Deko2119 bandwidth as well as for

CDMA by Deko2408. The dual-band combination supports a single

Distribution Antenna System to provide coverage by different providers.

Deko2119 fully meets the FCC standard requirements.

1.2 APPLICATIONS

Dekolink’s Mini-Repeaters are suitable for deployment in dense urban

environments, tunnels and other areas where physical structures cause low

cellular coverage.

The Mini-Repeater introduces new system capabilities that enable a wide

variety of applications particularly when adjacent band selectivity and/or very

high spectral purity are required. This repeater provides a solution to situations

in which flexible, high quality and high resolution filtering methods are

necessary.

Dekolink’s Mini-Repeaters help improve in-building coverage, as the driver for

a single antenna for spot coverage or a distributed antenna system (DAS) for

larger coverage areas.

PRODUCT MANUAL MINI-REPEATER DEKO2119 DEKOLINK WIRELESS LTD.

Page 2 Proprietary Data Pub. 313-2006 Rev. 2.01S

1.3 MAIN FEATURES

Some of the Deko2119 PCS Mini-Repeater features are listed below:

•1/8 W (+21 dBm) Uplink and Downlink composite power

•82 dB RF gain

•Highly linear amplification

•Excellent out-of-band interference prevention

•Tunable sharp cutoff IF SAW filters

•High spectral purity

•SAW Switcher capability

•Unique microprocessor controlled features:

oRemote or local control and alarms (software enabled)

option

oSmart ALC, for in-network transparent operation

oBuilt-in power measurement and RSSI indication.

•Excellent power to volume ratio

•Boasts a stylish design for indoor installation, and can be easily

installed on a wall or on a pole.

1.4 DESCRIPTION

1.4.1 General

This paragraph provides a brief description of key functional capabilities of

Mini-Repeater Deko2119.

1.4.2 Switchable Bandwidth

The internal SAW Switcher enables to implement the Switchable Bandwidth

option. This function enables more efficient and better adaptability of the

Repeater to your needs. This capability enables you to install the Repeater in

different operation environments or adapt it to the evolving operating

environment.

In standard configuration, the Switchable Bandwidth function provides the

capability to set up to three pre-determined different frequency blocks of 5, 10

and 15 MHz bandwidth respectively, as per requirement. The operating center

frequency is user-adjustable anywhere within the PCS band.

This capability ensures that in case of bandwidth evolution at the installation

site, you are not required to replace the installed Repeater, just set the second

bandwidth.

1.4.3 Smart-ALC

The downlink path includes Dekolink’s Smart Automatic Level Control

(Smart-ALC) control algorithm to ensure linear operation of the Repeater. This

feature automatically adjusts the Repeater gain, reducing it in case of over the

limit power output, or boosting it to maintain maximum gain utilization.

The Smart-ALC automatically maintains downlink and uplink gain balance.

This capability keeps system transparency at all times and enables "cell

Table des matières

Autres manuels Dekolink Répétiteur

Dekolink

Dekolink MW-FBDA-PCS-xxx-50W Manuel utilisateur

Dekolink

Dekolink DEKO2408 Manuel utilisateur

Dekolink

Dekolink MW-BDA-ESMR-25W90 806-15 Manuel utilisateur

Dekolink

Dekolink Deko3108S Manuel utilisateur

Manuels Répétiteur populaires d'autres marques

Gigaset

Gigaset 108 Manuel utilisateur

Ace TECHNOLOGY

Ace TECHNOLOGY USR-1900A Manuel utilisateur

Kenwood

Kenwood TKR-750-850 Manuel de la liste des pièces

Asus

Asus RP-AC51 Manuel utilisateur

Exibel

Exibel HRP0101 Manuel utilisateur

Kidde

Kidde Vega Manuel utilisateur

Telcosat

Telcosat RBB 850 Guide d'installation

York

York Universal LINC485 Manuel utilisateur

MIKOM

MIKOM MRx01B Power Series Manuel utilisateur

Simrad

Simrad RD 301 Manuel utilisateur

Tait

Tait TB7304 Manuel utilisateur

R-tron

R-tron RSN-CDMA-37-C Manuel utilisateur

Inventronics

Inventronics DALI REPEATER SO Manuel utilisateur

XFP

XFP 16 Manuel utilisateur

Andrew

Andrew MRx18 Manuel utilisateur

COMBA

COMBA RXA3748 Manuel utilisateur

ADRF

ADRF SDR-ICS-43 Manuel utilisateur

Teltonika

Teltonika WRP100 Manuel utilisateur