WSDI-2 User’s Manual/Installation Note
DEIF A/S Page 7 of 21
5. Setup
The indicator has three different menus for use in different situations:
The main menu is for the daily use, and here the user can:
set the dimmer level according to the current light conditions
on the bridge (10 dimmer levels).
change the wind speed read-out according to user preferences
(M/S, KNOTS or BEAUFORT).
The main menu is default when the indicator is powered up.
The advanced menu is for changing fundamental user settings, and
here the user can:
select the wind type measurement to be relative or true read-
out (true also needs speed signal connected, see appendix 2).
change the damping of the read-out. This is to get a more
relaxed reading if this is wanted. The damping can be selected
in four levels: 1, 5, 10 or 30 seconds.
The damping is an averaging function applied to both digital
read-out and pointer.
select the beep sound on or off, when pushing buttons.
select light groups. Needs CAN connection between used
indicators. This feature enables the user to dim more
indicators in selected groups from just one of the indicators in
the group. Up to seven groups can be selected. Normally,
‘None’ is selected for single dimmer systems.
For entering the advanced menu, see the following pages.
