DEGREE CONTROLS Rooster Monitor100 Manuel utilisateur

Rooster™ Monitor100 USER MANUAL

Rooster™ Monitor100 USER MANUAL 62310MN000-A04 1 of 33

User Manual

This is proprietary information of Degree Controls Inc., contents are protected under US copyright laws © Degree

Controls, Inc. 2020.

High Performance Airflow Monitor

with Full-Color Touch Screen Display

Version 1.04

Complete Kit includes:

oAlarm Module

oChoice of Sensor Type

oPower Supply

Rooster™ Monitor100 USER MANUAL

Rooster™ Monitor100 USER MANUAL 62310MN000-A04 2 of 33

Contents

Contents ........................................................................................................................................................................2

Product Overview ..........................................................................................................................................................3

Hard Button Overview ...............................................................................................................................................3

Soft Buttons and Home Screen Layout ......................................................................................................................4

Feature Overview ......................................................................................................................................................4

Rear Panel Layout for Advanced Connections...........................................................................................................7

Technical Specifications.................................................................................................................................................8

Connection and Wiring Information..............................................................................................................................8

Sash Input..................................................................................................................................................................9

Night Setback Input...................................................................................................................................................9

Alarm Outputs .........................................................................................................................................................10

Mechanical Information ..............................................................................................................................................10

Alarm Module..........................................................................................................................................................10

Probe Sensor............................................................................................................................................................11

Sidewall Sensor........................................................................................................................................................11

Inline Sensor ............................................................................................................................................................11

Installation...................................................................................................................................................................12

Back Plate Mounting Options - Alarm Module........................................................................................................12

Installation Procedure .............................................................................................................................................12

Probe Sensor............................................................................................................................................................13

Sidewall Sensor........................................................................................................................................................14

Single Walled Cabinet .........................................................................................................................................14

Dual Walled Cabinet ...........................................................................................................................................16

Inline Sensor ............................................................................................................................................................17

Boot Up Procedure ......................................................................................................................................................18

Access Tier Privileges: USER, EH&S & CERTIFIER ........................................................................................................19

Set/Change Passwords ................................................................................................................................................20

Calibration Procedure..................................................................................................................................................20

Calibration Troubleshooting....................................................................................................................................22

Alarm Threshold Configuration ...................................................................................................................................23

Alarm Troubleshooting............................................................................................................................................23

Alarm Controls.............................................................................................................................................................24

Night SetBack ..........................................................................................................................................................24

Alarm Ringback .......................................................................................................................................................24

Alarm Delay.............................................................................................................................................................25

Startup Delay...........................................................................................................................................................26

Latch Alarm .............................................................................................................................................................26

Alarm Tone Settings ................................................................................................................................................26

Backlight Dimming.......................................................................................................................................................27

Airflow Sensitivity........................................................................................................................................................27

Airflow Resolution .......................................................................................................................................................28

I/O Polarity...................................................................................................................................................................28

Import/Export..............................................................................................................................................................29

EEPROM...................................................................................................................................................................29

Event Log .................................................................................................................................................................29

USB Field Upgrade Procedure .....................................................................................................................................30

Soft Reboot Procedure to Upgrade Rooster TM Monitor100 Operating System .......................................................30

Power Cycle Procedure to Upgrade Rooster TM Monitor100 Operating System ......................................................30

Factory Reset Procedure .............................................................................................................................................31

GUI Map.......................................................................................................................................................................32

Warranty......................................................................................................................................................................33

Rooster™ Monitor100 USER MANUAL

Rooster™ Monitor100 USER MANUAL 62310MN000-A04 3 of 33

Product Overview

Congratulations on your purchase of the RoosterTM Monitor100. The RoosterTM Monitor100 is a

next-generation airflow monitoring and alarm system for use in a variety of critical containment

applications, where airflow is required to be viewed, monitored, alarmed, and communicated to

building and laboratory systems.

A brief overview of the RoosterTM Monitor100’s many features, including but not limited to:

Glove-friendly touchscreen.

Best in class air velocity sensing.

Sensor for canopies, negative pressure cabinets, and for use in

hospital/laboratory/kitchen.

Quick, 2 step calibration process.

Bright backlit display.

Password protected access tiers limit access to critical functions for authorized users.

Data and event logging for your airflow safety compliance needs.

Import/export configuration file to save setup time and ensure consistency among all

RoosterTM Monitor100s in your facility.

The RoosterTM Monitor100 is the first airflow alarm monitor that allows USB-based plug and play

firmware upgrades, to keep your product current and operating to the latest standards.

This manual will guide you through installation, calibration procedures, firmware upgrades,

alarm control settings, and the full range of features for the RoosterTM Monitor100.

Hard Button Overview

MUTE

Mutes the audible alarm, any time it is sounding. When the alarm has

been muted, a mute icon [ ] will appear in the top center portion

of the home screen. Just like a snooze button, the audible alarm will

re-sound, when the configurable time-out is reached if ringback has

been enabled.

HOME

Returns the user to the home screen when pushed from any menu or

info screen. *Cannot be used to abort the calibration procedure and

some critical system functions.*

LED

A red LED will flash while an airflow alarm is active. The red LED will

also flash if Sash High and Night Setback alarms are active. In all

other cases, this LED will remain off.

Rooster™ Monitor100 USER MANUAL

Rooster™ Monitor100 USER MANUAL 62310MN000-A04 4 of 33

Soft Buttons and Home Screen Layout

Feature Overview

CUSTOM ASSET TAG

Users logged in as EH&S can change default “Asset Tag” to a custom tag. This is useful

for naming the chemical fume hood, or company asset, or laboratory. A 12-digit numeric

asset tag can be set with the provided on-screen keypad, OR plug in a USB interface

keyboard to enter a 12-character alphanumeric tag. Users can enable or disable display of

the Asset Tag.

Home> Settings>System>Advanced>Configure Asset Tag

CLOCK

Users logged in as EH&S or Certifier can set time, date and change clock to display in 12

or 24-hour format.

Home> Settings>System>Date & Time>Date & Time Settings

KEYPAD AND BUTTON SOUNDS

Users may toggle keypad and button beep sounds on and off.

Home> Settings>System>Alarms/Sound>Key Beep

DEVICE VOLUME

Users can toggle through low, medium or high alarm volumes. If logged in as EH&S or

Certifier, a global minimum volume threshold can be set. This restricts a standard user

from setting an alarm volume too low for particular facility safety requirements.

Home> Settings>System>Alarms/Sound>Device Volume

Startup Delay Indicator

Night Setback/Mute Indicator

Asset Tag

Air Temperature

(touch to toggle units)

Face Velocity

(touch to toggle units)

Settings Menu

USB input for keyboard

and firmware upgrades

Time of Day

Alert Banner

Quick access to current

configuration settings

including: alarm thresholds,

calibration date, and

firmware version

Status Color (Green, Yellow

or Red)

Rooster™ Monitor100 USER MANUAL

Rooster™ Monitor100 USER MANUAL 62310MN000-A04 5 of 33

ON-SCREEN ALERT BANNERS

A yellow banner will appear beneath on-screen velocity readings to alert users regarding

various scenarios: Low Airflow, Power Failure

Home

TOGGLE VELOCITY UNIT TYPE

Instantly toggle displayed velocity units from m/s to fpm, or vice versa, by pressing on the

displayed velocity reading on the home screen.

Home

TOGGLE TEMPERATURE TYPE

Instantly toggle displayed temperature units from Fahrenheit to Celsius, or vice versa, by

pressing on the displayed temperature reading on the home screen.

Home

PASSWORD-PROTECTED ACCESS TIERS: CERTIFIER & EH&S

Password protected access tiers enable advanced configuration options and features.

Home> Settings>System>Advanced>Change Passwords

USB INTERFACE FOR UPGRADES, DATA EXPORT & SETTINGS IMPORT/EXPORT

Firmware upgrades can be installed on-site via USB flash drive. See the USB Field Upgrade

section of this manual for more information.

Users can export the event log in .csv format to a USB thumb drive.

RoosterTM settings can be saved to a USB thumb drive for future use or for download

onto neighboring RoosterTMs.

CUSTOMIZABLE BOOT SCREEN

Our engineers can configure your unit with a custom image or logo file (240x320) in

portable network graphic (.png) format to display on bootup. Contact our sales team to

get started: sales@degreec.com

NIGHT SETBACK

EH&S or Certifier users can configure 3 convenient modes (Audible, Muted, or Off) of

operation.

The RoosterTM Monitor100 is a normally open device. To trigger audible or muted night

setback, the dry contact relay must be closed. See the Calibration Procedure for

Rooster™ Monitor100 USER MANUAL

Rooster™ Monitor100 USER MANUAL 62310MN000-A04 6 of 33

instructions on how to setup night setback alarm thresholds.

Home> Settings>System>Alarms/Sound>Alarm Controls>Night Setback

ALARM LATCHING

EH&S or Certifier users can setup latched alarms to indicate that a low airflow state has

occurred in the “Alarm Controls” menu. User must then enter a EH&S or Certifier

passcode to unlatch an alarm.

Home> Settings>System>Alarms/Sound>Alarm Controls>Latch Alarm

ALARM RINGBACK

EH&S or Certifier users can configure the amount of snooze time before an alarm rings

again after being muted in the “Alarm Controls” menu. Optionally, the audible alarm can

be turned off completely.

Home>Settings>System>Alarms/Sound>Alarm Controls>Alarm Delay Settings>Ringback

BACKLIGHT DIMMING

Users can toggle the brightness setting, as well as the brightness of the screen when set

to “dim”. A “time before dim” option is available that sets the screen to dim after a

predetermined amount of time has expired.

Home> Settings>System>Brightness

AIRFLOW RESOLUTION

EH&S or Certifier users can select the units of measurement displayed for the resolution

of air velocity in either meters per second or feet per minute.

Home>Settings>System>Airflow Settings>Airflow Resolution

TWO POINT CALIBRATION

For greater accuracy and performance, the RoosterTM Monitor100 uses a two-point

calibration procedure to collect both a high velocity and low velocity reference point. The

low velocity reference point is collected by leaving the sensor cover in place while

performing this calibration step (note: for probe sensor calibration only). See the

Calibration Procedure section of this manual.

Home>Settings>Calibration>Calibrate

Rooster™ Monitor100 USER MANUAL

Rooster™ Monitor100 USER MANUAL 62310MN000-A04 7 of 33

Rear Panel Layout for Advanced Connections

Figure 1 Connections

Connection

Description

Connector Type

Mating Connector

Power Entry

2-Pin, polarized, Phoenix

Contact

Included and attached to AC/DC power supply

Sensor Connection

RJ-11

Included as part of sensor assembly

Output Connection

8-pin, polarized, Phoenix

Contact

*2-position connectors will fit

Not included

8-position orderable Part Number: Phoenix Contact 1803633

2-position orderable Part Number: Phoenix Contact 1803578

Input Connection

10-pin, polarized, Phoenix

Contact

*2-position connectors will fit

Not included

10-position orderable Part Number: Phoenix Contact 1803659

2-position orderable Part Number: Phoenix Contact 1803578

Table 1 Connections - Rear Panel of Display Module

Optional Sash Switch kit, Degree Controls P/N: 62310AS004 includes 10-postion Phoenix

Contact connector.

Rooster™ Monitor100 USER MANUAL

Rooster™ Monitor100 USER MANUAL 62310MN000-A04 8 of 33

Technical Specifications

Connection and Wiring Information

Degree Controls recommends 18-24 AWG wire be used for all wiring connections to the input

and output connectors. The Sensor and Power Entry connections have been prepared for you,

and merely need to be pulled through the openings and connected to the display module. If the

Sash Switch option is purchased, this is pre-connectorized for you as well.

The RoosterTM Monitor100 has additional input and output capabilities for night setback and

customers using their own sash switch. These cable harnesses should be prepared by the client,

using the orderable mating connectors listed above.

The I/O connectors present on the RoosterTM Monitor100 have some pins deactivated as these

are reserved for future Rooster TM models designed for more advanced control functionality:

oOutput Connector, Pins 5-8

oInput Connector, Pins 7-10

Leave these pins non-connected.

Alarm Module Size

82mm x 135mm x 19mm (3.2” x 5.3” x 0.7”)

(without back plate)

LCD Display Area

57mm x 70mm (2.3” x 2.7”)

Airflow Velocity Range

30-2,000 fpm (0.15- 10.0 m/s)

Response Time

< 1 second

Supply Voltage

24VAC/VDC & Wall Adapter

Night-Set Back Input

Dry Contact Closure (0V)

Pins 5-6

Sash Switch Input

Pin 1= +15V Power (For Proximity SW)

Pin 2= SASH (Contact or Proximity)

Pin 3= GND (Contact or Proximity)

Relay Outputs

Qty. (2), 1A, 24VDC

Pins 1-2 Air Alarm

Pins 3-4 Sash Alarm

Power Adapter

90-250V

Red LED indicator

160° viewing angle

Alarm Volume

0 - 85dB (adjustable)

Relative Humidity

(non-condensing) 5 - 95%

Operating temperature

5°C - 60°C (40°F - 140°F)

Storage temperature

-40°C - 85°C (-40°F - 185°F)

Weight

<170g (<6oz)

Compliance Standards

CE, RoHS

Rooster™ Monitor100 USER MANUAL

Rooster™ Monitor100 USER MANUAL 62310MN000-A04 9 of 33

Sash Input

This sash position input is a digital input, and the default I/O polarity of this input is normally

open. The design intent is as follows:

When the sash is in a safe position, the proximity sensor should not detect metallic

object/strip.

Sash position input logic may be reversed using the I/O polarity menu on the Rooster™

Monitor100 to achieve a different result, and any proximity sensor may be implemented.

Degree Controls can provide you with an optional Sash Position Sensor comprised of (1)

inductive proximity sensor and (1) 10-position connector which mates to the input connection

of the display module. This inductive proximity sensor switches state when it contacts metal

surfaces. This sash sensor is a normally open device, meaning it closes upon sensing metallic

objects.

The DegreeC Sash Position Sensor (Part# 62310AS004), comes with three stripped and tinned

wire leads:

Brown = +15V

Black = Sash

Blue = Ground

Wire these in their respective positions 1, 2, and 3 on the input connection block.

Note: For implementation support, or for users preferring to use a micro-switch for sash alarm

activation, please contact Degree Controls.

Night Setback Input

The RoosterTM Monitor100 allows the user to connect to a digital input, dry contact, on positions

5 & 6 of the Input Connector, for Night Setback. The purpose of the Night Setback input is to

provide the user with the ability to send a remote signal to all RoosterTM Monitor100s

simultaneously, to change their behavior during low flow conditions. This signal is normally

initiated by a Laboratory or Building Management System (BMS).

Once the wiring connections are made, the user can assert, and also remove, the Night Setback

signal via the BMS. Three Monitor100 night setback states can be selected.

Audible: In this state, when a Night setback signal is asserted, the Monitor100 will still

audibly alarm when airflow drops below the NSB trip threshold. Note: NSB threshold is

independently set.

Muted: In this state, when the Night Setback signal is asserted, the Monitor100 will

alarm (screen will display a red background, and the LED will flash) when airflow drops

below the NSB trip threshold, but the alarm will be muted.

Rooster™ Monitor100 USER MANUAL

Rooster™ Monitor100 USER MANUAL 62310MN000-A04 10 of 33

Off (default): In this state, when the Night Setback signal is asserted, the Monitor100

will ignore it.

Alarm Outputs

The RoosterTM Monitor100 alarms for airflow and sash position. The Alarm outputs are relay

outputs available on the output connection of the display module. I/O polarity logic of outputs

may be reversed as well. See the I/O Polarity menu of the Rooster™ Monitor100.

Mechanical Information

Alarm Module

Figure 2 Alarm Module with Wall-Mount Back Plate

Table des matières

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur