Page 6
Notes
The brewing process can be stopped at any
time by pressing the On/Off Lbutton.
Caution
Ensure that you place glass jug Fon the
warming plate Gquickly (max. 30 seconds
delay). Otherwise the brewed coffee from the
filter could overflow.
Operation
Preparation
1Remove all packaging and stickers and
dispose them according to applicable legal
regulations.
2Before using the appliance for the first
time, clean all parts which come into contact
with water carefully. Please see full details in
the “Cleaning and Care” section.
2
3Make sure that the appliance is placed in
an upright position and on a stable, flat,
clean, dry, and non-slip surface.
Brewing Coffee
1Open the water tank cover Aand fill the
water tank Bwith drinking water. The water
should not exceed the max. level marked on
the water gauge Dwith the required amount
of water, but do not fill past the “MAX” mark.
Note
Use only clean, cold, and fresh drinking
water.
2Add coffee powder into the filter. Usually a
cup of coffee requires a level spoon of coffee
powder but you may adjust according to
personal taste. Then close the water tank
cover A.
3Place the glass jug Fon the warming plate
G.
4 Connect the plug to the wall socket. The
LCD will display 12:00 o clock with a flashing
blue light.
5 Press the On/Off Lbutton. The brewing
process begins.
6Remove glass jug Fto serve when
brewing is complete (about one minute later
after the coffee stops dripping out).
7Even after the process has finished you
can keep the appliance energized. The
coffee will be kept warm by the warming
plate G. The appliance powers off
automatically after 40 minutes if it has not
been manually disconnected at the
completion of brewing.
Notes
For an optimum coffee taste, serve it after
brewing.
Caution:
If the swivel filter holder is not closed or
the glass jug F is not placed accurately, the
drip - stop function will not function properly.
It could cause hot water or hot coffee to
overflow.
If you want to use the glass jug Ffor more
than 30 seconds, switch off the appliance.
Never open the swivel filter holder during the
brewing process, even if no water is draining
from the filter. Extremely hot water or coffee
can spill out from the swivel filter holder and
cause injury. If water or coffee is not draining
from the swivel filter holder, immediately
unplug the appliance and wait 10 minutes
before opening and checking the swivel filter
holder.
When the brewing process ends and the
water level indicator with MAX marking is
empty, there will still be hot liquid in the
swivel filter holder. Wait a few minutes for
the rest of the liquid to drip into the glass jug
F.
8Remove the glass jug Ffrom the warming
plate G, as soon as the brewing process has
finished and the glass jug Fis filled. The
coffee is ready for use.
9To turn the appliance off, press the L
button again.
– Switching the L button turns off the
appliance.
10 Disconnect the appliance from the wall
socket.
Note
If you want to continue the brewing process,
repeat the procedure from 1 to 10. Let the
appliance cool down at least 15 minutes
between each brewing process.
