DEEPBLU cosmiq+ Manuel utilisateur
COSMIQ+
Dive Computer User Manual
Firmware version 1.7
© Deepblu, Inc. All rights reserved.
Contents
1. Overview 1
1.1 COSMIQ versus COSMIQ+1
1.2 Key features 1
2. Safety information 2
2.1 Safely diving with your COSMIQ+2
2.2 Alarms 3
2.3 Dive alarms table 3
3. Operating your COSMIQ+6
3.1 Buttons and navigation 6
3.2 Operating modes 6
4. Setting up your COSMIQ+with your mobile device 8
4.1 Pairing your COSMIQ+with your mobile device 8
4.2 Adjusting the settings 8
4.3 Updatingthermware 9
4.4 Synchronizing dive data 9
5. Diving with your COSMIQ+11
5.1 Planning a dive 11
5.2 Diving in Scuba Mode 11
5.2.1 Checking and adjusting the settings 11
5.2.2 Entering the water 13
5.2.3 Information during your dive 13
5.2.4 After your dive 14
5.2.5 Warnings during the dive 15
5.3 Diving in Bottom Timer Mode 17
5.3.1 Entering the water 17
5.3.2 During your dive 18
5.3.3 After your dive 18
5.4 Diving in Freediving Mode 19
5.4.1 Setting time and depth alarms 19
5.4.2 Entering the water 19
5.4.3 During your dive 20
5.5 After your dive 20
6. Checking your dive logs 22
7. COSMIQ+maintenance 23
7.1 Battery and charging 23
7.2 Taking care of your COSMIQ+23
7.3 Safe disposal 23
8. Technicalspecications 25
9. Limited warranty 27
10. Glossary 28
1
COSMIQ+Dive Computer
Back to Contents
1. Overview
Congratulations on the purchase of your new COSMIQ+ Dive Computer!
Your COSMIQ+Dive Computer is designed to bring an entirely hassle-free diving
experience to scuba divers and freedivers. The COSMIQ+is easy to read and operate
and synchronizes wirelessly with the Deepblu app, allowing you to effortlessly create
digital dive logs that you can keep as a memory or share with your peers.
1.1 COSMIQ versus COSMIQ+
Launched in November 2016, the COSMIQ+is a refresh of the original COSMIQ. The
COSMIQ+and COSMIQ are nearly identical, but the COSMIQ+replaces the Gauge
Mode with a Bottom Timer Mode, which adds a resettable average depth and a
secondarytimereading.Unlessotherwisespecied,allinstructionsinthismanual
apply to both models.
1.2 Key features
Measures all vital dive data and performs decompression, saturation and
desaturation calculations.
∙∙Large, high-contrast screen displaying all vital dive information at once.
∙∙Scuba Mode with proprietary and adjustable decompression algorithm based on
Bühlmann ZHL-16C to help you safely dive within your limits.
∙∙Bottom Timer Mode with resettable average depth and stage time (COSMIQ+ only).
∙∙Gauge Mode with current depth and run time (Original COSMIQ only).
∙∙FreediveModedesignedspecicallyforfreediving(apnea).
∙∙Log Mode to quickly check on up to 25 previous dives.
∙∙Dive Plan function to dynamically plan your dive.
∙∙Audible and visual alarms to warn you of dangerous situations.
∙∙Wireless synchronization with a mobile device to create and share digital dive logs.
∙∙Easily adjustable settings via the user-friendly Deepblu app.
∙∙Supports nitrox diving between 21% and 40%.
∙∙Supports high-altitude diving and diving in highly saline water.
∙∙Freeover-the-air(OTA)rmwareupgrades.
∙∙Rechargeable Li-ion battery with magnetic USB connector.
∙∙Power-saving mode and brightness settings to extend battery life.
OVERVIEW
SAFETY
OPERATION
PAIRING
DIVING
DIVE LOGS
CARE
SPECS
WARRANTY
GLOSSARY
OVERVIEW
2
COSMIQ+Dive Computer
Back to Contents
2. Safety information
NOTE: Always turn off your COSMIQ+beforeying,aschangesinpressuremay
causeittostartloggingandexceedtheno-decompressionlimit,lockingyouout
of Scuba Mode.
Carefully read the entire contents of this user manual and be sure that you fully
understand the purpose, technical functions, settings, risks, and limitations of your
device before diving. Failure to do so might lead to serious injury, harm, sickness or
even death.
If you have any questions about your COSMIQ+Dive Computer, please ask your
COSMIQReseller,speaktoaqualieddiveinstructor,orcontactDeepbluat
2.1 Safely diving with your COSMIQ+
DO NOT use your COSMIQ+ as your primary dive computer if you plan to do a
technical dive (i.e. a dive deeper than 40 m (130 ft) with decompression stops and/or
in any enclosed or challenging environments such as caves, wrecks, ice, high altitude
lakes and/or any sort of penetration using air mixes with oxygen levels outside the
21%—40% range).
DONOTusetheCOSMIQ+forscubadivingifyouarenottrainedorcertiedinthe
appropriate use of scuba equipment and techniques by an internationally accredited
dive agency. Using a dive computer is not a substitute for adequate training.
DONOTusetheCOSMIQ+forfreedivingifyouarenottrainedorcertiedinthe
appropriate freediving techniques.
DO NOT use the COSMIQ+ for diving with nitrox if you have not been trained by a
recognizedcerticationagencyintheappropriateuseofnitrox.
DO NOT ignore alarms and warnings on your COSMIQ+, whether at the surface or
during a dive. Failure to respond appropriately to alarms and warnings may result in
harm, injury, sickness and even death.
DO NOT board a plane when the No-Fly icon is showing. Flying while COSMIQ+
displays the No-Fly symbol may result in serious injury or death.
Using the COSMIQ+ DOES NOT remove the risk of decompression illness.
Decompressionillnessmaystilloccurevenwithadiveprolebasedondivetables
or which is deemed safe by a dive computer. The COSMIQ+ does not consider the
OVERVIEW
SAFETY
OPERATION
PAIRING
DIVING
DIVE LOGS
CARE
SPECS
WARRANTY
GLOSSARY
SAFETY
3
COSMIQ+Dive Computer
Back to Contents
unique biological characteristics of each individual diver, including their physiological
disposition, alcohol consumption, dehydration, or use of medication or other drugs,
all of which may cause a diver to be more susceptible to decompression illness.
Deepblu strongly advises that you consult a doctor before diving to determine your
tnessfordiving.
Using the COSMIQ+ does not replace the need for other instruments. The COSMIQ+
is intended to supplement the use of other instruments, including a depth gauge,
pressure gauge, timer and watch.
DO NOT exchange your COSMIQ+ with others during dives or between two dives in
a series. The information displayed applies only to the diver who has been using it
throughout a dive or series of dives, and the recorded information will therefore not
be accurate for anyone else.
Ensure that your COSMIQ+ works properly before diving. Check the display and
cycle between modes to verify that it is functioning properly. Additionally, make
surethatthereissucientbatterypowertocompleteyourdive.DONOTdiveifthe
computer’s display is not clearly visible, if it is frozen in one mode, or if the battery
power is low.
2.2 Alarms
The COSMIQ+Dive Computer uses a range of visual and audible alarms to warn you
of potentially dangerous situations while diving. It also lets you set custom depth
and time alarms. It is very important to understand the purpose and function of the
alarms so you can take appropriate action and avoid danger.
2.3 Dive alarms table
Situation Alarm What to do
Safe Ascent Rate
Exceeded
∙∙Continuous beeping
∙∙Ascent rate bar full
Slow your ascent until
alarm stops.
CNS = 80% ∙∙5 beeps per minute
∙∙CNSashing
∙∙Arrow indicator
ashing
End the dive. Conduct a
safety stop and ascend to
the surface.
OVERVIEW
SAFETY
OPERATION
PAIRING
DIVING
DIVE LOGS
CARE
SPECS
WARRANTY
GLOSSARY
SAFETY
4
COSMIQ+Dive Computer
Back to Contents
CNS >= 85% ∙∙10 beeps per 3 seconds
∙∙CNSashing
∙∙Arrow indicator
ashing
End the dive. Conduct a
safety stop and ascend to
the surface.
Maximum Operation
Depth (MOD) Exceeded
∙∙Continuous beeping
∙∙PO2ashing
∙∙Up arrow indicator
ashing
Ascend above the MOD.
Consider ending the dive.
No-Decompression Limit
(NDL) Approaching
∙∙3 minutes left: 3 beeps
∙∙2 minutes left: 3 beeps
∙∙1 minute left: 5 beeps
Ascend to a shallower
depth.
No-Decompression Limit
(NDL) Exceeded
∙∙10 beeps during 20
seconds, 10-second
pause, repeated for 3
minutes
∙∙Up arrow indicator
ashing
∙∙CEL and Ceiling Depth
valueashing
∙∙Stop indicator and
Stop Countdown Time
ashing
Ascend to the Ceiling
Depth indicated in the
bottom left corner
of COSMIQ+and
perform a mandatory
decompression stop. Do
not ascend above the
Ceiling Depth until the
Stop Countdown Time
shows 00:00.
Battery Power Low 1 beep every minute Charge your COSMIQ+
as soon as possible.
Consider ending your
dive.
COSMIQ+Shutting Down 1 beep End your dive safely.
Charge your COSMIQ+
immediately.
Depth Limit Reached
(Freedive Mode)
3 short beeps
Time Limit Reached
(Freedive Mode)
6 cycles of 3 beeps
OVERVIEW
SAFETY
OPERATION
PAIRING
DIVING
DIVE LOGS
CARE
SPECS
WARRANTY
GLOSSARY
SAFETY
5
COSMIQ+Dive Computer
Back to Contents
Surface Interval
Completed
(Freedive Mode)
∙∙2 cycles of 2 beeps
(surface interval half
completed)
∙∙2 cycles of 3 beeps
(surface interval
completed)
Depth Limit Reached
(Scuba Mode)
6 cycles of 2 beeps
Time Limit Reached
(Scuba Mode)
6 cycles of 3 beeps
OVERVIEW
SAFETY
OPERATION
PAIRING
DIVING
DIVE LOGS
CARE
SPECS
WARRANTY
GLOSSARY
SAFETY
6
COSMIQ+Dive Computer
Back to Contents
3. Operating your COSMIQ+
3.1 Buttons and navigation
To turn on your COSMIQ+, hold the left and right buttons simultaneously for 3–5
seconds. Your COSMIQ+will start in Watch Mode.
Press the left button (MODE) button to cycle through the various operating modes.
Press the right button (ADJUST)buttontoadjustmode-specicsettings.
In Watch Mode, your COSMIQ+will automatically enter Standby after 20 seconds of
inactivity to conserve battery power. While the screen goes blank, the computer is
still active. Press any button to activate your COSMIQ+ and turn on the display. You
can adjust the standby timeout in the Deepblu app.
To fully turn off your COSMIQ+, make sure it is in Watch Mode or Standby, and hold
both buttons simultaneously for 3–5 seconds.
NOTE:AlwaysturnoffyourCOSMIQ+beforeying,aschangesinpressuremaycause
it to start logging and exceed the no-decompression limit, locking you out of Scuba
Mode.
3.2 Operating modes
Your COSMIQ+Dive Computer has 6 operating modes. You can tell which mode is
currently active by looking at the icon indicator at the top of the screen.
∙∙Watch Mode : Shows the current time and date and allows you to make a
dive plan. If the time and date are incorrect, synchronize your COSMIQ+ with the
Deepblu app.
∙∙Scuba Mode : Measures and displays all vital dive information while scuba
diving. It will also visually and audibly let you know if you are entering potentially
dangerous situations.
∙∙Bottom Timer Mode : Your COSMIQ+acts as a depth gauge and timer and
DOES NOT perform any decompression calculations. On the original COSMIQ
model, this mode was called Gauge Mode.
OVERVIEW
SAFETY
OPERATION
PAIRING
DIVING
DIVE LOGS
CARE
SPECS
WARRANTY
GLOSSARY
OPERATION
7
COSMIQ+Dive Computer
Back to Contents
∙∙Freedive Mode : Measures and displays all vital dive information while
freediving. Allows you to set time and depth alarms.
∙∙Log Mode : Gives access to dive data from previous dives.
∙∙Sync Mode : Allows you to sync your COSMIQ+with the Deepblu app to
transfer dive data and change the settings. Shows an overview of your device’s
settingsandcurrentrmwareversion.
OVERVIEW
SAFETY
OPERATION
PAIRING
DIVING
DIVE LOGS
CARE
SPECS
WARRANTY
GLOSSARY
OPERATION
Autres manuels pour cosmiq+
1
Table des matières
Autres manuels DEEPBLU Instrument de plongée
