DECKED.COM |#DECKEDUSA |@DECKEDUSA DS1/DS2 | v.8 | Page 3
▼ HEY! TORQUE BOY: READ BEFORE YOU INSTALL DECKED ▼
1. DON’T gorogueon us,please readtheinstructions.
2. DON'T overtightenbolts,getem' hand-tight.
3. DON'Tuse powertools.
4. Ifyoudon'tfollowdirectionsand
do
usepowertools:
1). Setclutchataverylowsetting. 2). Ifyoublowit,seeNOTE.*
NOTE*Twoextrathreadedinsertsareincluded inBAG PREP-EXTRA.That’sallyouget,unlessyoucall us and ask for
more.The insertswillreplaceanystrippedinsertsinthetailgateammocansorfrontfaceof the centervertat
thebottleopener,butNOTTHETOPOF THE CENTER VERT,sohandtightenuntil snug only!Youcan alsoscrewthe
insertsback in if dislocated.Thereis astraightscrewdriverslotontheundersideofthe threadedinsert.
5. Startallboltswithfingerstoavoidcross-threading.
6. DON'T overtightenJ-hooksduringinstallation.
Justget 'emgood andsnug; enoughtokeepthe
systemfrommovingin the bed.
7. Nice jobif you’restillreading.
TAILGATEammo canshavewidebottoms;CABSIDE ammocans havenarrowbottoms.
NOTE:Youwillneed abuddy tohelpwith exactlytwosteps.
Prevent embarrassing, expletive-filled language,
watch our detailed installation video or give us a call. We’re happy to help!
208.806.0251 | DECKED.COM/INSTALLVIDEO
AMMO CAN DRAIN HOLES
(TODRILL ORNOTTODRILL.)
• Do you use a tonneau or shell over your DECKED system?
There is no need to drill holes, unless you leave your tonneau open in a deluge.
• Does your DECKED system live outside?
The ammo cans will get water in them. You’ll need to drill holes in the ammo cans.
There are two dimples in the bottom of each ammo can. Drill a 1/2” hole at each dimple. A smaller hole
will get clogged.
