Decakila KUMG003B Manuel utilisateur

KUMG003B

FOOD PROCESSOR

1600 MAX

1400

1200

1000

800

600

200

400

IMPORTANT SAFEGUARDS

KNOW YOUR FOOD PROCESSOR

HOUSEHOLD USE ONLY

BEFORE FIRST USE

BLENDING

CHOPPING

CLEANING

SLICING/CHIPPING/SHREDDING

ENVIRONMENT FRIENDLY DISPOSAL

CONTENTS

IMPORTANT SAFEGUARDS

Before using the electrical appliance, the following basic precautions should always be followed including the following:

Read all instructions, and save it for future reference.

Before using, check that the voltage of wall outlet corresponds to that shown on the rating plate.

Do not operate any appliance with a damaged cord or plug or aer the appliance malfunctions, or is dropped or damaged in any

manner. Bring it to a qualied technician for examination, repair or electrical or mechanical adjustment.

Do not let cord hang over edge of table or counter.

To protect against risk of electrical shock, do not put the motor base into water or other liquid. To disconnect, turn any control to

“o”, then remove plug from wall outlet by grasping the plug, not the cord.

Close supervision is necessary when any appliance is used by or near children.

Keep hands and utensils away from moving blades or discs while processing food to reduce the risk of severe injury to persons or

damage to the Food Processor. A scraper or spatula may be used, but must be used only when the Food Processor is not running.

Avoid contacting moving parts.

Never feed food by hand. Always use food pusher.

Before removing the lid from the jar from the power unit, switch o the unit, wait until the blades have come to a complete stop.

Do not use ngers to scrape food away from discharge disc while appliance is operating. Cut type injury may result.

Be certain lid is securely locked into place before operating appliance.

Be sure to switch off the appliance after each use of your food processor. Make sure the motor stops completely before

disassembling.

Do not put your ngers or other objects into the unit opening while it is in operation. If food becomes lodged in opening, use food

pusher or another piece of fruit or vegetable to push it down. When this method is not possible, turn the motor o and disassemble

to remove the remaining food.

Do not attempt to defeat the cover interlock mechanism.

The metal blades and disk is extremely sharp, handle with care. Always hold the blade assembly by the nger grip or stem, away

from the cutting edge, both when handling and cleaning.

To reduce the risk of injury, never place processing blade or circle blade ass’y on drive sha without the processing jar locked

properly in place.

Do not leave this appliance unattended during use.

If this appliance falls or accidentally becomes immersed in water, unplug it immediately. Do not reach into the water! Do not use

this appliance aer it has fallen into or becomes immersed in water.

To reduce the risk of injury to persons or property, never use this appliance in an unstable position.

Do not use this appliance for other than its intended use.

The use of attachments not recommended or sold by the manufacturer may cause re, electric shock or injury.

Switch o the appliance and disconnect from supply before changing accessories or approaching parts that move in use.

Always disconnect the appliance from the supply if it is le unattended and before assembling, disassembling or cleaning.

Do not use outdoors.

Unplug from outlet when not in use, before putting on or taking o parts, and before cleaning.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent

or similarly qualied persons in order to avoid a hazard.

Caution: never immerse in water, unplug before inserting or removing parts.

Caution: do not open lid until blades stop.

Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards

involved. Children shall not play with the appliance.

This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.

Do not ll the bowl above the marked maximum ll line (or rated capacity) to avoid risk of injury due to damage to the cover or

bowl.

Save these instructions.

KNOW YOUR FOOD PROCESSOR HOUSEHOLD USE ONLY

POLARIZED PLUG

This appliance has polarized plug(one blade is wider than the

other) . To reduce the risk of electric shock, this plug is intended

to t into a polarized outlet only one way. If the plug does not

fit fully into the outlet, reverse the plug, If it still does not fit,

contact a qualied electrician. Do not attempt to modify in any

way.

BEFORE FIRST USE

Before first use, carefully unpack the food processor and its

attachments and remove any package material or label or

stickers. Clean all the parts except the motor base following the

instructions in CLEANING AND MAINTENANCE. Handle the “S”

blade or circle blade ass’y with extreme care as they are sharp.

The food processor can be used for kneading, beating and

whisking, chopping the meat or vegetable and fruit, shredding,

slicing and chipping the vegetables or potatoes, blending the

smooth soup, sauces, creams, fruit purees, milk and so on,

using dierent accessory to perform dierent task.

BLENDING

1. Place the blending jar on the Motor Unit from the unlock

position and slightly turn the jar clockwise until the blending jar

locks into the lock position on the motor base. If the blending

jar is not or is badly positioned, the blender will not work.

2. Peeled or cored the fruit or vegetables and then cut it into

small dices, put the food piece into the jar. Usually certain

amount of purified water has to be added to facilitate the

smooth running of appliance. The amount of mixture should

not exceed the max level as indicated on the blending jar.

Note: never use boiling liquids or run the appliance empty.

And the blending jar can not be used for blending meat.

3. Replace the Jar Cover on the jar and ensure that the Jar Cover

can x with the jar securely.

4. You may add ingredient into the jar through the center

opening of Jar Cover during operation, then replace Measuring

Cup if necessary. Let the tabs of Measuring Cup align with the

grooves of Top Cover, put down and turn in clockwise by 90°to

lock it in place, when disassembling, turn the measuring cup in

anti-clockwise by 90°to unlock it.

5. Connect the plug to wall outlet and set Speed Selector to your

desired speed. There are four setting: P, 0, 1, 2. The 1 setting is

the low speed, the 2 setting is the high speed. Turn the selector

to P position and hold it to pulse actuate motor for

delicate chopping. Release it to return the 0 position. The Pulse

mode allows you to create a burst of power for quick, eicient

blending.

Note: The total operating time should not more than 3

minutes.

6. Turn the Speed Selector to 0 Position once the mixture has

been blended to your desired consistency.

7. Remove the blending jar from the Motor Unit (turning the jar

anti-clockwise), carefully take down the Jar Cover, then pour

and serve.

8. The proportion of the Carrots and water is 3:2. Make sure

the quantity of the water shall not be more than the maximum

specied water quantity.

0505

CLEANING

1. Disconnect the power supply before cleaning.

2. Pour a little warm water into the jar, turn and hold the speed

selector to P position for a few seconds.

3. Remove the jar and rinse and rinse under running water.

Remove Jar cover and measuring cup, then immerse the top

cover, measuring cup in water and clean them with a so brush,

nally clean them with dump cloth.

Caution: the blade base can be disassembled for cleaning.

4. Wipe the outside of base with a damp cloth. Never immerse

it in water as electric shock is possible to occur. Then dry

thoroughly. Ensure the interlock area is free of food particles.

CHOPPING

1. Firstly assemble the driving sha into the motor base, make

sure it is clipped into position.

2. Place the chopping jar on the Motor Unit from the unlock

position and slightly turn the chopping jar clockwise until the

chopping jar locks into the lock position on the motor base.

Make sure it is assembled in place correctly, otherwise the

appliance will not operate.

3. Insert the “S” blade into the driving sha in the chopping jar

securely. Make sure it is locked into position.

anti-clockwise away from motor base, and li it o. Empty the

processed food.

CAUTION: The “S” blade is extremely sharp, handle with care.

4. Then place the prepared chopping food into the jar. The food

must be cut into small size firstly (such as 2cm*2cm*6cm for

beef). During chopping, you can add food through the feeding

funnel with the pusher, never using food or nger to push the

food into the feeding funnel.

5. Place the lid onto the jar and turn it clockwise until the tab of

the lid clicks into slot in the jar handle. Make sure it is locked in

position correctly, otherwise the appliance will not operate.

6. Connect the appliance to power supply and set Speed

Selector to your desired speed.

7. There are four setting: P, 0, 1, 2. The 1 setting is the low speed,

the 2 setting is the high speed. Turn the selector to P position

and hold it to pulse actuate motor for delicate chopping.

Release it to return the 0 position. The Pulse mode allows you

to create a burst of power for quick, eicient blending. You can

chop up to 400g of following foodstu.

Hard substance: cheese, dried fruits, and certain vegetables

(carrots...)

So substance: certain vegetables (onions…)

Raw and cooked meat (boned and sliced)

CAUTION: The total operating time should not be more than

90 sec.

8. Turn the Speed Selector to “0” position and unplug the

appliance aer chopping. Open the top lid and grasp blade by

its hub and remove. Unlock chopping jar by turning it in

0707

CLEANING

1. Disconnect the power supply before cleaning.

2. Empty the chopping jar, dismantle all detachable parts and

rinse them in warm soapy water. Extreme caution must be taken

when handling blade as it is very sharp. All the accessories

except motor base are dishwasher safe components, but

the temperature setting shall not exceed 70 ℃. Then dry

thoroughly.

3. Wipe the outside of base with damp cloth. Never immerse

it in water as electric shock is possible to occur. Then dry

thoroughly. Ensure the interlock area is free of food particles.

FOR A QUICK WASH UP

Between processing tasks, pour in some water into the

chopping jar, turn and hold the speed selector to P position a

few seconds for quick cleaning.

SLICING/CHIPPING/SHREDDING

1. Firstly assemble the driving sha into the motor base, make

sure it is clipped into position.

2. Place the chopping jar on the Motor Unit from the unlock

position and slightly turn the chopping jar clockwise until the

chopping jar locks into the lock position on the motor base.

Make sure it is assembled in place correctly, otherwise the

appliance will not operate.

3. Fit the shredding blade or slicing blade or chipping blade

(coarse or ne) into the disk stand, place them in the bowl.

NOTE: For assembling, first push in the no block side, then

push in the other side. For disassembling the blade from the

disk stand, first push out one side with no block, then push

out the other side.

4. Place the lid onto the chopping jar and turn it clockwise until

the tab of the lid clicks into slot in the jar handle. Make sure it

is locked in position correctly, otherwise the appliance will not

operate.

5. Turn the speed selector to 1 or 2 setting to start.

Note: the shredding/slicing/chipping disks can slice thickly-

potatoes, onions, carrots…

6. Use the food pusher to feed food into the feeding funnel. The

food shall be cut into proper size to suitable for the feeding

funnel. You can slice/chip up to 1000g of food.

7. Minimum 2 minutes rest period must be maintained after

one operation cycle. At least 30 minutes rest period must be

maintained to let the appliance cool down aer three operation

cycles.

8. Turn the speed selector to “0”position and unplug unit aer

processing. Remove the blade ass’y. Unlock jar by turning it

in anti-clockwise away from its base, and lift it off. Empty the

processed food.

CAUTION: The blade is extremely sharp, handle with care.

CLEANING

1. Disconnect the power supply before cleaning.

2. Empty the chopping jar and remove the disk stand from the

bowl, then remove the shredding/slicing/chipping blade from

the disk stand, the pusher from the lid, the lid from the bowl,

then immerse the lid, pusher, chopping jar, disk stand and the

shredding/slicing/chipping blade in water and clean them with

a soft brush. Extreme caution must be taken when handling

blade as they are very sharp.

Note: For disassembling the disks from the disk stand, first

push out one side with no block, then push out the other side.

For assembling, rst push in the no block side, then push in

the other side.

3. Wipe the outside of base with cloth. Never immerse it in water

as electric shock is possible to occur. Then dry thoroughly.

Ensure the interlock area is free of food particles

Note: Some food may discolor the disk stand. This is normal

and will not harm the plastic or eect the avor of food. Rub

with cloth dipped with vegetable oil to remove discoloration.

Table des matières

Autres manuels decakila Robot culinaire

decakila

decakila KUMG002W Manuel utilisateur

Manuels Robot culinaire populaires d'autres marques

INNOLIVING

INNOLIVING INN-727 Manuel utilisateur

Berkel

Berkel C32 Manuel utilisateur

Beko

Beko CHP5554W Manuel utilisateur

KitchenAid

KitchenAid 5KFP0719 Manuel utilisateur

QUIGG

QUIGG KM 2017Wi.20 Manuel utilisateur

Lakeland

Lakeland PRESS AND CHOP 31557 Manuel utilisateur

Bosch

Bosch MMR08 GB Series Manuel utilisateur

HOFFEN

HOFFEN Chef Express T9532 Manuel utilisateur

Garland

Garland 852 ZG Manuel utilisateur

Robot Coupe

Robot Coupe CL50 Gourmet Manuel utilisateur

SAPIRHOME

SAPIRHOME SP-1111-K Manuel utilisateur

Moulinex

Moulinex DJ3051 Manuel utilisateur

Bosch

Bosch MUM5 Manuel utilisateur

cecotec

cecotec Mambo Touch Manuel utilisateur

KitchenAid

KitchenAid 9KFC0516 Manuel utilisateur

Black & Decker

Black & Decker hc 300 Instructions d'installation

Gorenje

Gorenje SBR 1000 DV Manuel utilisateur

Arzum

Arzum AR 1128 Manuel utilisateur

decakila KUMG003B Manuel utilisateur

Manuels Robot culinaire populaires d'autres marques