DaytonAudio WP65WT Manuel utilisateur
6-1/2"IP66 INDOOR/
OUTDOOR PENDANT
SPEAKER PAIR 70V/100V
WITH 8 OHM BYPASS
WHITE
Model: WP65WT User Manual
2
Congratulations on the purchase of your Dayton Audio®WP65WT speaker. This rugged,
all-purpose speaker is designed to deliver reliable, high-quality audio in commercial and
residential applications, while withstanding outdoor environments. The WP65WT features
an IP66 weather-resistant ABS construction, 2-way coaxial speaker design.
• 6.5" woofer with coaxial 1" tweeter
• Versatile mounting brackets for pendant mount, wall mount, or landscape applications.
• Integral 70V transformer with selectable taps and 8 ohm bypass
• Suitable for indoor or outdoor installation
Please read these instructions completely before you begin your installation.
1) Speaker Connection
Remove about 8" of the cable jacket to expose the inner conductors. Strip 1/4" of in-
sulation from each conductor and connect to the speaker terminals. When connect-
ing the wires to the speakers, be sure to observe proper polarity for the best sound.
Most CL2 rated speaker cable will have red and black colored wires inside the
jacket. Connect the red wire to the (+) terminal and the black wire to the (-) terminal.
The red (+) and black (-) speakers wires should correspond to the same terminals
on the amplier.
NOTE: If this speaker will be used with a 70V/100V distributed audio system, do
not set the 70V/100V tap to the 8 ohm setting. Doing so may damage your speaker
when playing. To use this speaker with a conventional (non-70V/100V) audio sys-
tem, change tap to the 8 ohm setting. If you are unsure what type of audio system
you have, consult a professional installer before continuing.
Step 1: Remove the speaker end cap
Using a screwdriver or other at-blade tool, turn the tap selector knob to the desired
setting. Selecting the 8 ohm setting will remove the transformer from the signal path
and allow a conventional amplier to drive the speaker. If using a 70V/100V system
choose the appropriate output setting for the application.
Step 2: Reinstall speaker end cap
Once you have selected the correct setting and mounting bracket you can feed the
speaker wire through the end cap and reinstall.
Typical 70V/100V installation wiring method
3
(A) Wall Mount (B) Pendant Mount
(C) Landscape
2) Choose Speaker Location
Simply place them 5-8 feet apart wherever you desire music for the best possible
performance. If you will be installing your speakers outdoors, select locations facing
your listening area that are protected from rain, snow, and out of direct sunlight for
extended product life.
CAUTION: Be certain that there are no electrical wires, water pipes, or heating
ducts in the planned installation area before you begin drilling. If there is an electri-
cal outlet nearby, turn off the circuit breaker to avoid possible injury.
NOTE: Your Dayton Audio WP65WT speaker is compact, but substantial in weight.
Speaker should be mounted to a solid structure, not drywall. If drywall mounting is
required, use high-strength anchors designed for heavy loads such as light xtures.
To avoid personal injury, please make sure the location you choose for mounting
your speakers can safely support their weight.
Dayton Audio®Last Revised: 5/13/2021
daytonaudio.com
tel + 937.743.8248
info@daytonaudio.com
705 Pleasant Valley Dr.
Springboro, OH 45066
USA
5-Year Limited Warranty
See daytonaudio.com for details
Specications
Model number:.......................... WP65WT
Description:............................... Commercial indoor/outdoor speaker
Woofer: ..................................... 6.5" mineral-lled polypropylene
Tweeter:.................................... 1" fabric
Frequency response:................ 60-20,000 Hz
Impedance:............................... 8 ohms/70V
70V/100V taps:......................... 8 ohms/NC/20W/10W/5W/2.5W
Power handling (RMS/Peak): ... 40W/80W
SPL:.......................................... 87 dB / 88 dB @ 8 ohm setting, 2.83V/1m
Dimensions:.............................. 10-1/4" height, 8-1/8" diameter
Color:........................................ White
Weight: ..................................... 4.2 lbs
Ingress protection rating:.......... IP66
3) Troubleshooting
Should your speakers not work properly, check the following:
No sound from speakers or quiet/strange sound:
•Make certain you observed proper polarity for both speaker inputs. Check the
connections at the back of the receiver, and then at the speaker.
• Verify that the amplier is powered on and the volume is turned up.
•Check that the correct transformer tap is selected for your application. If you
are using a stereo amplier or a receiver, use the 8 ohm tap.
•Mute feature or protection mode is activated. Check for short circuits in speak-
er wiring.
One speaker is playing while the other is not playing or plays quietly:
•Check the balance control on the receiver. Make sure it is centered.
•
Loose connection at either the receiver or the speaker. Double check connections.
•Bad speaker cable. Replace the suspect speaker cable.
Amplier/Receiver cuts out:
•This could be caused by a short circuit between the positive and negative
leads. Check the connections at the back of the receiver, and then at the
speaker; make sure that no strands of wire from one connector are touching
the other connector.
Table des matières
Autres manuels DaytonAudio Intervenants
DaytonAudio
DaytonAudio MARK1 Manuel utilisateur
DaytonAudio
DaytonAudio XRA25 Manuel utilisateur
DaytonAudio
DaytonAudio B652 Manuel utilisateur
DaytonAudio
DaytonAudio WP4BT Manuel utilisateur
DaytonAudio
DaytonAudio IO525B Manuel utilisateur
DaytonAudio
DaytonAudio MARK1 Manuel utilisateur
DaytonAudio
DaytonAudio ME650C Manuel utilisateur
DaytonAudio
DaytonAudio MARK2-WF Manuel utilisateur
DaytonAudio
DaytonAudio UA721 Manuel utilisateur
DaytonAudio
DaytonAudio VS8 Manuel utilisateur
DaytonAudio
DaytonAudio B452 Manuel utilisateur
DaytonAudio
DaytonAudio AERO Manuel utilisateur
DaytonAudio
DaytonAudio MKBOOM Manuel utilisateur
DaytonAudio
DaytonAudio Ultra US622C Manuel utilisateur
DaytonAudio
DaytonAudio IO8XTW Manuel utilisateur
DaytonAudio
DaytonAudio CS620C Manuel utilisateur
DaytonAudio
DaytonAudio BST-300EX Manuel utilisateur
DaytonAudio
DaytonAudio MARK2-WF Manuel utilisateur
DaytonAudio
DaytonAudio B652 Manuel utilisateur
DaytonAudio
DaytonAudio ME525MTM Manuel utilisateur
Manuels Intervenants populaires d'autres marques
Bowers & Wilkins
Bowers & Wilkins 4 Manuel utilisateur
Sonance
Sonance SONOS OUTDOOR Series Manuel utilisateur
Electro-Voice
Electro-Voice EVID FM4.2 Manuel utilisateur
Pioneer
Pioneer XW-HTD630 Manuel utilisateur
Onn
Onn BWA16AA002 Manuel utilisateur
HP
HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur