DaytonAudio Class-T Manuel utilisateur

Class-T

Digital Audio Amplifier

Module

Introduction:

The Class-T Digital Audio Amplifier is designed around the

Tripath TA-2024 IC. The TA2024 is a 15W/ch continuous

average two-channel Class-T Digital Audio Power Amplifier

IC using Tripath’s proprietary Digital Power Processing™

technology. Class-T amplifiers offer both the audio fidelity of

Class-AB amplifier and the power efficiency of a Class-D

amplifier.

This PCB amplifier is ideal for any audio enthusiast that

enjoys building and modifying speaker systems. The

applications are virtually limitless since this tiny PCB

measures a mere 2-11/16" x 1-5/16". Build you own

speakers or incorporate the amplifier into an existing

speaker cabinet. www.daytonaudio.com

Schematic Diagram:

The schematic diagram above is provided for reference. It illustrates the TA-2024

IC and the input and output circuits on the PCB. CDO are two output capacitors.

These capacitors are ideally placed close to the speaker terminals or crossover

input terminals as appropriate.

Warranty:

This Dayton Audio® product is warranted free from defects

in material and workmanship for one year from date of

purchase. Warranty does not apply to misuse, abuse,

neglect, accident, improper use, etc. Contact your Dayton

Audio reseller for a Return Merchandise Authorization.

www.daytonaudio.com

Assembly:

¾Remove the amplifier PCB from the static protective

sleeve using static protective gloves or wrist band

¾Solder the speaker wires to the PCB at points "A & B"

oThere are polarity marks (L+/- R+/-) printed on the bottom

of the PCB

¾Solder the power leads (if desired) at point "C"

oThere are polarity marks (B+/B-) printed on the bottom of

the PCB

¾Plug the LED ribbon cable into the white two-pin socket

at point "D" and mount the power indicator LED

oPolarity: the anode (+) lead is long, the cathode (-) is short

oClip the leads of the LED to the desired length

oPlug the black LED socket onto the LED leads;

anode to red wire and cathode to black wire

Refer to this diagram if for correct polarity

¾Wrap each speaker wire through a ferrite core; one wrap

per core is all that is required

¾Solder the speaker wires to the speaker terminals

¾Solder an output capacitor across the speaker terminals

in parallel with the speaker wires

¾Connect power via the power leads or DC power jack;

we recommend a 12VDC, 2000mA power supply similar

to Parts Express model 120-052

¾Mount the volume control in the desired location and

connect to the amplifier PCB using the 12" ribbon cable

¾Mount the PCB using adhesive pads or with a zip tie

www.daytonaudio.com

Features:

¾Class-T architecture

¾“Audiophile” Quality Sound

o0.03% THD+N @ 9W, 4Ω

o0.10% IHF-IM @ 1W, 4Ω

o11W @ 4Ω, 0.1% THD+N

o6W @ 8Ω, 0.1% THD+N

¾High Power

o15W @ 4Ω, 10% THD+N

o10W @ 8Ω, 10% THD+N

¾High Efficiency

o81% @ 15W, 4Ω

o90% @ 10W, 8Ω

¾Dynamic Range = 98 dB

¾Over-current protection

¾Over-temperature protection

Package Contents:

(1) Class T Digital Audio Amplifier PCB

(1) Volume control PCB with 12" ribbon cable

(1) LED power indicator with ribbon cable

(2) 12" Speaker Wires (Red & Black)

(2) 12" Power Wires (1 Red & 1 Black)

(2) 12" LED Wires (1 Red & 1 Black)

(2) Ferrite Cores

(2) Output Capacitors

Autres manuels DaytonAudio Amplificateur

DaytonAudio

DaytonAudio HTA20 Manuel utilisateur

DaytonAudio

DaytonAudio SPA250 Manuel utilisateur

DaytonAudio

DaytonAudio MA1240a Manuel utilisateur

DaytonAudio

DaytonAudio MA1260 Manuel utilisateur

DaytonAudio

DaytonAudio HTA200BT Manuel utilisateur

DaytonAudio

DaytonAudio PMA250 Manuel utilisateur

DaytonAudio

DaytonAudio SPA100-D Manuel utilisateur

DaytonAudio

DaytonAudio KAB-2150 Manuel utilisateur

DaytonAudio

DaytonAudio DTA-100LF Manuel utilisateur

DaytonAudio

DaytonAudio WF40A Manuel utilisateur

DaytonAudio

DaytonAudio MCA3545 Manuel utilisateur

DaytonAudio

DaytonAudio HTA100 Manuel utilisateur

DaytonAudio

DaytonAudio DA30 Manuel utilisateur

DaytonAudio

DaytonAudio SA100 Manuel utilisateur

DaytonAudio

DaytonAudio MA455 Manuel utilisateur

DaytonAudio

DaytonAudio SPA1000 Manuel utilisateur

DaytonAudio

DaytonAudio DSPB Series Manuel utilisateur

DaytonAudio

DaytonAudio KABX Manuel utilisateur

DaytonAudio

DaytonAudio APA1200DSP Manuel utilisateur

DaytonAudio

DaytonAudio DA60R Manuel utilisateur

DaytonAudio

DaytonAudio SA1000 Manuel utilisateur

DaytonAudio

DaytonAudio SA25 Manuel utilisateur

DaytonAudio

DaytonAudio DTA-100ST Manuel utilisateur

DaytonAudio

DaytonAudio DA240R Manuel utilisateur

Manuels Amplificateur populaires d'autres marques

ASTRO

ASTRO HVO V40 P Manuel utilisateur

Marantz

Marantz SUPERSCOPE BLA-545 Instructions de montage

NAD

NAD CI980 Manuel utilisateur

Technics

Technics SE-CH770 Manuel utilisateur

Harman Kardon

Harman Kardon HK6300 Manuel utilisateur

NAD

NAD T975 Manuel utilisateur

McIntosh

McIntosh MA6850 Manuel utilisateur

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuel utilisateur

Viatron

Viatron Autrix Manuel utilisateur

GME

GME GA9800 Manuel utilisateur

Atlas

Atlas CP700 Manuel utilisateur

Roland

Roland KC-1000 Manuel utilisateur

Pyle

Pyle PFMRA350BW Manuel utilisateur

Advantage

Advantage S-250 Manuel utilisateur

IRT Electronics

IRT Electronics DVA-3007 Manuel utilisateur

Dimavery

Dimavery BA-100 Series Manuel utilisateur

Sony

Sony XM-S400D Manuel utilisateur

Schertler

Schertler ROY X Manuel utilisateur