Davone Studio DSP Manuel utilisateur

Davone

User manual Davone WISA

loudspeakers, Studio DSP,

Twist DSP, Solo DSP

and thank you for choosing Davone to bring music to your home. Davone stands for combining traditional Danish hand

craftsmanship with sound quality of the highest calibre. Therefore it is worth taking care with the set up of your system. In

this manual you will nd instructions for how to connect, position, maintain and warrant this loudspeaker. Should you have

any questions that you feel have not been answered, feel free to contact your dealer, your local Davone distributor or the

Davone staff in Denmark.

WELCOME

Read these instructions

Keep these instructions

Heed all warnings

Follow all instructions

• Do not use this apparatus near water.

• Clean only with dry cloth

• Install in accordance with manufactures instructions

• Do not install near heat sources such as radiators, heat registers, stoves, or other ap-

paratus (including ampliers) that produce heat.

• Keep candles or other items with open ames away from this product at all times.

• Protect the power cord from being walked on or pinched particularly at plugs, conve-

nience receptacles, and the point where they exit from the apparatus.

• Use only with the stand sold with the apparatus.

• Use caution when moving the apparatus to avoid injury from tip-over.

• Place your product on a rm surface where you want it placed permanently. Do not

place on top of other objects, stands or tables.

• Refer all servicing to qualied service personnel. Servicing is required when the ap-

paratus has been damaged in any way, such as power-supply cord or plug is damaged,

liquid has been spilled, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

• WARNING: To reduce the risk of re or electric shock, do not expose this appli-

ance to rain or moisture. Do not expose this equipment to dripping or splashing

and ensure that no objects lled with liquids, such as vases, are placed on the

equipment.

• Unplug this apparatus during lightning storms or when unused for long periods

of time.

• If an abnormal smell or smoke is detected from the appliance, turn the power

off immediately and unplug the unit from the wall outlet. Contact your dealer

immediately.

• Do not attempt to open the product. Leave such operations to qualied service

personnel.

• The product is intended for indoor use in dry, domestic environments only. Use

within a temperature range of 15–25°C.

• Leave enough space around the product for adequate ventilation. Place 1 me-

ter from wall and ammable objects such as curtains etc.

• Do not cover or place items on the product, such as clothing.

• The product can only be switched off completely by switching the on/off but-

ton off on the backside.

• The Safety markings are on the backside of the product

• Be aware that volume suddenly can go up to max when starting music. Always

check your sound level before you start playing music.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIVAL CHOCK; DO NOT OPEN THE SPEAKER HOUS-

ING. NO USER_SERVICABLE PARTS INSIDE: REFER TO QUALIFIED SERVICE PERSONEL

Important safety instructions

The lightning ash with arrowhead symbol within an equilateral triangle, is

intended to alert the user to the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of sufcient magnitude to consti-

tute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the

user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the product.

After unpacking, make sure the system is complete and check the de-

vice and all accessories for transport damage. Transport damage may be

expected if the packaging is already severely harmed. Do not attempt to

start up a damaged device. If the contents are incomplete or damaged,

please contact your Davone dealer. Dealer addresses can be found on the

Internet at www.davoneaudio.com.

This equipment is a Class II or double insulated electrical appliance. It has

been designed in such a way that it does not require a safety connection

to electrical earth.

Electrical and electronic equipment, parts and batteries marked with this

symbol must not be disposed of with normal household wastage, it must

be collected and disposed of separately to protect the environment. For

more detailed information on recycling this product, please contact your

local authority.

Hereby, Davone declares that the radio equipment type Davone DSP is

in compliance with Directive 2014/53/EU.

CONNECT YOUR SPEAKERS

• Turn on your loudspeakers (large button with 0 and 1 on the back plate).

• Press the small button on the back plate for at least 1.5 seconds.

• After about 15 seconds a repeating beep will sound, indicating that the speaker

is now ready to pair with a WISA transmitter. There is no need to press the small

button in case you hear the beep already after powering up.

• Turn on the WISA transmitter and start scanning for WISA loudspeakers.

• Follow the pairing instructions of the transmitter. When the speakers are paired,

the loudspeaker beep sound stops.

• You are now ready to play music.

• NOTE: not all transmitters have the ability to assign a location to a loudspeaker

like “front left” for example. Our stereo loudspeakers are always programmed

with a xed location “front left” and “front right” to enable to function with

such a transmitter. Check if the location of the speaker matches the sound

channel.

• NOTE: if the pairing beep sound restarts after shutting down the transmitter,

the pairing was not performed correctly. Perform the pairing sequence again

and make sure any previous pairings are removed before.

• NOTE: in case speakers are added later, it is best to perform the paring se-

quence for all speakers simultaneously. Remove all previous pairings.

GENERAL OPERATING DESCRIPTION

WISA speakers operate with their own wireless network consisting of a transmitter

and receiver (the loudspeaker). During pairing of transmitter and receiver, a unique

code is stored in both for an exclusive connection.

As long as the loudspeaker is turned on, it scans for the paired transmitter for 5

seconds, then pauses the scan for 12 seconds to save power. This cycle continues

indenitely. Therefore, powering off the speaker during holidays for example, is

recommended.

Once the loudspeaker detects a transmitter being switched on, the amplier

and DSP are turned on. If the transmitter is not playing music for longer than 15

minutes, the amplier and DSP are turned off and will automatically turn on again

when music resumes.

PLACEMENT

INTRODUCTION

By doing 2 quick experiments you can learn the basics of room acoustics and you will

be able to get the best sound from your loudspeaker. We hope you are up for it. Just

pressing an automatic room correction button (if available) might lead to disappoint-

ing results.

LISTENING TO A STANDING WAVE

When a loudspeaker plays music in a room, the sound is reected back and forth

between the walls, oor and ceiling. In the low frequencies this will lead to so called

standing waves. You can hear these yourself. Search for “sinewave 100 Hz” at Spotify.

Play and walk through the room. You will hear that the loudness varies a lot depend-

ing on where you are. Loudest in the corner and hardly audible in other places away

from the walls. Sitting and standing will also give different loudness.

LISTENING TO ROOM AMPLIFICATION

Place the loudspeaker in a corner. Play some music and pay attention to the bass.

Now place the loudspeaker in the middle of the room and play the same music. You

will hear the bass has become a lot less. The amount of sound the loudspeaker pro-

duces is spread in all directions now and therefore the bass output seems to be less

compared to the corner position, even though it is the same.

ROOM ABSORPTION

Sound is reects against walls, oor and ceiling and spread throughout the room. The

harder the surfaces, the more powerful the reections. Carpets, curtains and furni-

ture absorb the high frequencies more than the low frequencies. The sound becomes

unbalanced and might need a correction.

SELECT SOUND MODES

In case your transmitter does not support an equalizer or room correction, you can

use the build in sound modes.

• Turn on your loudspeakers

• Short press the button (less than 1,5 seconds) on the back to change a sound

mode. There are 4 sound modes. The sound mode is indicated by the number

of beeps that sound after pressing the button. The sound mode change has

to be performed on each loudspeaker. The change can be made while playing

music.

• Mode 1: free placement

• Mode 2: wall placement

• Mode 3: corner placement

• Mode 4: Xpert mode, free placement, no driver protection (!) , most accurate

sound (mode 4 not available in Solo)

• NOTE: for Solo mode 1,2,3 are all in Xpert mode.

• NOTE: the sound mode will be stored in the speaker after a change, but only if

the transmitter is shut down before the loudspeaker (normal operation). The

new sound mode is not stored if the speaker is powered down by the power

button while playing music.

PLACEMENT, continued

ROOM CORRECTION LIMITATIONS

We have learned standing waves cause the low frequencies to be of different loud-

ness throughout the room. No room correction system in the world can correct for

this effect. All it can do it optimize the sound level in a small listening area. However,

standing waves are most audible with continuous bass tones. Then the standing wave

gets time to build up by bouncing back and forth between the walls. Luckily, most

music does not have many continuous bass tones so the effect might not be very

prominent with music.

ROOM CORRECTION

Now you have become a room acoustics experts, you are ready to put the loudspeak-

ers in your preferred position. We have done our best to give our loudspeaker a

neutral character that is not very room critical. So hopefully it sounds all good to your

ears. If not, no worries. In case your transmitter supports room correction (Platin Ste-

reohub), download the room correction app from the Google play or Apple app store.

Then go to the equalizer menu and make corrections while listening where you would

do normally and then;

• If you have placed the loudspeakers in a corner or close to a wall, the bass possi-

bly needs to be adjusted downwards. Adjust the equalizer accordingly.

• If you room has many absorbing elements it is benecial to point the front of the

loudspeakers towards your listening area.

• If the above is not sufcient, it is likely that the high frequencies need to be

adjusted upwards. Adjust the equalizer accordingly. The sound will become more

open and clear.

• If you have a large room , perhaps you lack bass? Move the loudspeakers closer

to a wall or corner or adjust the equalizer bass setting upwards. This will limit the

maximum output however, so adjust within reason.

• Generally the mid tones do not need adjustment, but there is no harm in playing

with the level.

• If still not satised, try the automatic room correction if available. This will only

function in low frequencies.

Xpert MODE, NO DRIVER PROTECTION !

While DSP’s enable driver protection, the effect can not be inaudible because after

all, it has to limit the driver excursion at high loads. To remove the sound impact

of driver protection we have created this mode without protection. Just like with

analog loudspeakers, your ear will let you know when you play too loud.

Also, the cross over between woofer and tweeter is set for highest accuracy in

Xpert mode, whereas mode 1-2 offer slightly less details but more comfort, better

for lower quality recordings.

MAINTENANCE

• Painted metal usually only requires dusting. If you wish to use an aerosol or other

cleaner, rst test a small area. Some cleaning products may damage the surfaces.

Avoid products that are abrasive, or contain acid, alkali or anti-bacterial agents.

Spray aerosols onto the cleaning cloth, not directly onto the paint.

• Fabric is best cleaned with an adhesive roller. A clothes brush is not recommend-

ed.

• Laquered wood usually only requires dusting. If you wish to use an aerosol or

other cleaner, rst test a small area. Some cleaning products may damage the

surfaces. Avoid products that are abrasive, or contain acid, alkali or anti-bacterial

agents. Spray aerosols onto the cleaning cloth, not directly onto the lacquer.

This warranty covers Davone loudspeakers. Davone warrants that this

product shall be free from production and material defects for:

2 years

The warranty period begins at the date of sale and is subject to the following requirements and

understandings:

1) Neither transportation cost, nor any risk for removal, transportation and

installation of products is covered by this warranty.

2) Defects caused by incorrect installation or operation are not covered by this

warranty

3) Davone shall not be liable for defects arising from accidents, misuse, normal

wear and tear, mis-maintenance, voltage variation, overloading, stroke of

lightning and any other force majeure events.

4) Defects arising from modication, repair or attempt to repair by a non

authorised service facility are not covered by this warranty.

5) Davone is liable only to repair or replace defective parts or products and is not

responsible for indirect losses or damages arising from the use of the product.

A replacement cannot exceed the value of the product under warranty.

6) This warranty complements any national/regional law obligations of dealers or

national distributors and does not affect your statutory rights as a customer.

WARRANTY

In case of warranty inquiries, please contact your dealer. In case of request for service under

warranty, please enclose your original receipt. Use the original packaging for transportation.

Davone, Kirke Værløsevej 40, 3500 Værløse, Danmark www.davoneaudio.com

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Davone Intervenants

Davone

Davone Meander Manuel utilisateur

Davone

Davone Ray Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur