DATREND Systems VenTest Manuel utilisateur

Operating Manual

venTest™

Ventilator Tester

MN-108

venTest™

Ventilator Tester

Operating Manual

Unit 130 - 4020 Viking Way

Richmond, BC • CANADA • V6V 2L4

Tel: 800.667.6557 (North America Only) or

604.291.7747 • Fax 604.294.2355

e-mail: customerservice@datrend.com

To order this manual, use Part Number 6100-200

Revision

Revision History

Description Date

A Initial Release 2016-Mar-08

B General update 2018-Jun-28

Datrend Systems Inc. (“DSI”) agrees to a limited copyright release that allows you to reproduce manuals and other

printed materials for use in service training programs and other technical publications. If you would like other

reproductions or distributions, submit a written request to Datrend Systems Inc.

Unpacking and Inspection

Follow standard receiving practices upon receipt of the instrument. Check the shipping carton for damage. If damage

is found, stop unpacking the instrument. Notify the freight carrier and ask for an agent to be present while the instrument

is unpacked. There are no special unpacking instructions, but be careful not to damage the instrument when unpacking

it. Inspect the instrument for physical damage such as bent or broken parts, dents, or scratches.

Claims

Our routine method of shipment is via common carrier. Upon delivery, if physical damage is found, retain all packing

materials in their original condition and contact the carrier immediately to file a claim.

If the instrument is delivered in good physical condition but does not operate within specifications, or if there are any

other problems not caused by shipping damage, please contact your local sales representative or DSI immediately.

Standard Terms and Conditions

Refunds & Credits

Please note only serialized products (products labelled with a distinct serial number) and accessories are eligible for

partial refund and/or credit. Non-serialized parts and accessory items (cables, carrying cases, auxiliary modules, etc.)

are not eligible for return or refund. In order to receive a partial refund/credit, the product must not have been damaged,

and must be returned complete (meaning all manuals, cables, accessories, etc.) within 90 days of original purchase and

in “as new” and resalable condition. The Return Procedure must be followed.

Return Procedure

Every product returned for refund/credit must be accompanied by a Return Material Authorization (RMA) number,

obtained from Datrend Customer Service. All items being returned must be sent prepaid (freight, duty, brokerage, and

taxes ) to our factory location.

Restocking Charges

Products returned within 30 days of original purchase are subject to a minimum restocking fee of 15%. Products returned

in excess of 30 days after purchase, but prior to 90 days, are subject to a minimum restocking fee of 20%. Additional

charges for damage and/or missing parts and accessories will be applied to all returns. Products which are not in “as

new” and resalable condition, are not eligible for credit return and will be returned to the customer at their expense.

Certification

This instrument was thoroughly tested and inspected and found to meet DSI’s manufacturing specifications when it was

shipped from the factory. Calibration measurements are traceable to the National Research Council of Canada (NRC)

and/or the National Institute of Standards and Technology (NIST). Devices for which there are no NRC/NIST calibration

standards are measured against in-house performance standards using accepted test procedures.

Page i

Warranty

Warranty and Product Support

Datrend Systems Inc. ("DSI") warrants the venTest Unit (the "Datrend product") to be free from defects in materials and

workmanship under normal use and service for one (1) year from the date of original purchase. During the warranty

period DSI will, at our option, either repair or replace defects in materials and workmanship at no charge; provided the

Datrend product is returned (shipping, duty, brokerage and taxes prepaid) to DSI. Any and all transportation charges

incurred are the responsibility of the purchaser and are not included within this warranty. This warranty extends only to

the original purchaser and does not cover damage from abuse, neglect, accident or misuse or as the result of service

or modification by other than DSI. IN NO EVENT SHALL DATREND SYSTEMS INC. BE LIABLE FOR

CONSEQUENTIAL DAMAGES.

This warranty is subject to the following limitations:

!Standard Accessories: 90 day limited warranty

!Re-calibration of the instrument, which has a recommended annual calibration frequency, is not covered under the

warranty.

No warranty shall apply when damage is caused by any of the following:

!Power failure, surges, or spikes,

!Damage in transit, when moving the instrument, or if the unit is dropped,

!Improper power supply such as low voltage, incorrect voltage, defective wiring or inadequate fuses,

!Accident, alteration, abuse or misuse of the instrument,

!Fire, water damage, theft, war, riot, hostility, acts of God, such as hurricanes, floods, etc.

Only serialized products (those items bearing a distinct serial number tag) and their accessory items are covered under

this warranty. PHYSICAL DAMAGE CAUSED BY MISUSE OR PHYSICAL ABUSE IS NOT COVERED UNDER THE

WARRANTY. Items such as cables and non-serialized modules are not covered under this warranty.

This warranty gives you specific legal rights and you may have other rights, which vary from province to province, state

to state, or country to country. This warranty is limited to repairing the instrument to DSI's specifications.

When you return an instrument to DSI for service, repair or calibration, we recommend shipment using the original

shipping foam and container. If the original packing materials are not available, we recommend the following guide for

repackaging:

!Use a double-walled carton of sufficient strength for the weight being shipped.

!Use heavy paper or cardboard to protect all instrument surfaces. Use non-abrasive material around all projecting parts.

!Use at least four inches of tightly packed, industrial-approved, shock-absorbent material all around the instrument.

DSI will not be responsible for lost shipments or instruments received in damaged condition due to improper packaging

or handling. All warranty claim shipments must be made on a prepaid basis (freight, duty, brokerage, and taxes). No

returns will be accepted without a Return Materials Authorization ("RMA”) number. Please contact to obtain an RMA

number and receive help with shipping/customs documentation.

Page ii

Warranty Disclaimer

Should you elect to have your instrument serviced and/or calibrated by someone other than Datrend Systems or an

Authorized Service Centre, please be advised that the original warranty covering your product becomes void when the

tamper-resistant Quality Seal is removed or broken without proper factory authorization. We strongly recommend,

therefore, that you send your instrument to Datrend Systems or an Authorized Service Centre for service and calibration,

especially during the original warranty period.

In all cases, breaking the tamper-resistant Quality Seal should be avoided at all cost, as this seal is the key to your

original instrument warranty. In the event that the seal must be broken to gain internal access to the instrument (e.g.,

in the case of a customer-installed firmware upgrade), you must first contact Datrend Systems at 1-604-291-7747. You

will be required to provide us with the serial number for your instrument as well as a valid reason for breaking the Quality

Seal. You should break this seal only after you have received factory authorization. Do not break the Quality Seal before

you have contacted us! Following these steps will help ensure that you will retain the original warranty on your instrument

without interruption.

WARNING

Unauthorized user modifications or application beyond the published specifications may result in electrical shock hazards

or improper operation. Datrend Systems will not be responsible for any injuries sustained due to unauthorized equipment

modifications.

DSI DISCLAIMS ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR APPLICATION.

THIS PRODUCT CONTAINS NO USER-SERVICEABLE COMPONENTS.

UNAUTHORIZED REMOVAL OF THE INSTRUMENT COVER SHALL VOID

THIS AND ALL OTHER EXPRESSED OR IMPLIED WARRANTIES.

Note: Calibration of Datrend products typically involves adjustment of parameters stored in firmware by proprietary

software. Parties other than Datrend and its Authorized Service Centers are limited to verification of the status of the

accuracy of the instrument. Do not confuse verification with calibration.

Page iii

Page iv

venTest OPERATORS MANUAL

Table of Contents

ABBREVIATIONS AND DEFINITIONS.....................................VIII

SYMBOL DEFINITIONS............................................... X

1 SPECIFICATIONS................................................. 1

1.1 Instrument Specifications.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1.1 FlowSense 300 (Hi Flow) Sensor Measurement .. . . . . . . . . . . . . . . . . 1

1.1.2 FlowSense 012 (Low Flow) Sensor Measurement . . . . . . . . . . . . . . . . 4

1.1.3 Oxygen (O ) Sensor Measurement .. . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.1.4 IRMA AX+ Multigas Sensor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.2 UserInterface. .................................................. 9

1.3 ElectricalRatings................................................. 9

1.4 EnvironmentforUse. ............................................. 9

1.5 Dimensions. ................................................... 10

1.6 Weight........................................................ 10

1.7 StandardAccessories. ........................................... 10

1.8 OptionalAccessories............................................. 10

1.9 Compliance With Standards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2 OVERVIEW.................................................... 11

2.1 Features. ..................................................... 12

2.1.1 Analyzer Base Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.1.2 Pressure Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.1.3 Flow Sensor Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.1.4 Oxygen Sensor Connection.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

2.1.5 IRMA Sensor Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

2.1.6 Ethernet. .............................................. 17

2.1.7 USB................................................... 17

2.1.8 SDCardslot............................................ 17

2.1.9 Reset.................................................. 17

3 GENERAL INSTRUCTIONS.......................................... 18

3.1 Safety. ....................................................... 18

3.1.1 Responsibility of Operating Staff. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

3.2 Maintenance. .................................................. 19

3.3 Manufacturer Liability.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3.4 Precautions.................................................... 20

3.5 IntendedUse................................................... 21

4 OPERATION. .................................................. 22

4.1 Power. ....................................................... 22

4.1.1 PowerON.............................................. 23

Table of Contents #Page v

venTest OPERATORS MANUAL

4.1.2 Power OFF/Power Button Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

4.1.3 Energy Saving Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

4.1.4 Screenshots. ........................................... 24

4.2 UserInterface. ................................................. 25

4.2.1 Keyboard............................................... 26

4.2.2 Swipescreens........................................... 27

4.2.3 TraceDisplay. .......................................... 28

4.2.4 Measured Value Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

4.2.5 MainDisplay............................................ 30

4.3 StatusBar..................................................... 31

4.4 Structure of Measured Values Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

4.4.1 Measured Value Configuration Menu. . . . . . . . . . . . . . . . . . . . . . . . . 33

4.5 Overview: Measured Value. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

4.5.1 Flow Measured Values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

4.5.2 Ventilation Values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

4.5.3 Pressure Measured Values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

4.5.4 Gas Concentration Values.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

4.5.5 Other.................................................. 38

4.6 Overview: Standard Conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

4.7 Filter. ........................................................ 40

4.8 FlowSense Settings Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

4.9 Graph Configuration Menu.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

4.10 MainMenu.................................................... 42

4.10.1 SetupSubMenu........................................ 43

4.10.1.1 InfoandUpdate.......................................... 44

4.10.1.2 Date, Sound and Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

4.10.1.3 Network................................................ 46

4.10.1.4 Service................................................. 48

4.10.2 Display Sets Sub Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

4.10.3 Selection of Display Sets.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

4.10.4 Creation of New Display Sets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

4.10.5 Modifying Existing Display Sets.. . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

4.10.6 Import / Export of Display Sets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

4.10.7 Deleting Display Sets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

4.11 ‘Logging’SubMenu............................................. 53

4.12 SensorsSubMenu. ............................................ 56

4.12.1 Zeroing of Pressure Sensors.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

4.12.2 FlowSense Hi and Lo Sensors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

4.12.2.1 'General'............................................... 59

4.12.2.2 Inspiration & Expiration Trigger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

4.12.2.3 'Adjustment' Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

4.12.3 O-Sensor............................................. 65

4.12.4 IRMA™AX+........................................... 67

4.13 Creating Test Procedures and Test Reports (optional). . . . . . . . . . . . . . . . . . 68

4.14 SensorStartup................................................. 69

4.14.1 FlowSense Airflow Sensor.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Table of Contents #Page vi

Table des matières

Autres manuels DATREND Systems Équipement de test

DATREND Systems

DATREND Systems vPad-RW Manuel utilisateur

DATREND Systems

DATREND Systems ES601-US Manuel utilisateur

DATREND Systems

DATREND Systems ES601-CMMS Manuel utilisateur

DATREND Systems

DATREND Systems vPad-TI Manuel utilisateur

DATREND Systems

DATREND Systems medTester 5000B Instructions d'installation et d'utilisation

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur

DATREND Systems venTest Manuel utilisateur

Manuels Équipement de test populaires d'autres marques