Datapath Arqa Manuel utilisateur
Engineering the world’s best visual solutions
Quick Start Guide
Arqa Workstation
WELCOME
The aim of this document is to quickly guide users
through the basic process of using the Arqa
On-Screen Menu (OSM) for the rst time within an
Aetria® environment.
At this stage the Aetria OneControl group will have
been congured within the Aetria Command Center
by the system administrator along with any shortcuts
that will be used to control the Arqa Workstation.
For more detailed information regarding the Arqa
device, refer to the Arqa User Guide.
STEP 1 - ARRIVING AT THE
ARQA WORKSTATION
When the workstation mouse is moved between
screens a red border will ash on the currently active
screen as shown below, providing the feature has
been enabled in Aetria Command Center by the
administrator.
The user is presented with the Arqa on-screen menu
(OSM) on each screen which shows details of the
current remote connection.
STEP 2 - LOGGING ON
Press scroll lock ve times or use any pre-congured
keyboard shortcut as provided by your system
administrator to access the login screen presented.
Enter the login credentials that have been supplied by
the system administrator. It should be noted that the
login is case sensitive. When successfully logged in
the Status Screen is displayed.
STEP 3 - OPEN THE DEVICE LIST
To open the Device List, use the congured device
list shortcut key stroke provided by the system
administrator.
Alternatively, you can press scroll lock ve times in
quick succession to bring up the control menu and
press L for the Device List.
The Device List displays a list of sources available for
use on the Arqa Workstation. The list is dened by
the user permissions congured in Aetria Command
Center.
To display a specic source on the currently active
Workstation screen, use the up/down cursor keys
on the keyboard to select the required source and
press enter to connect to the remote source and
see it displayed on the screen. If another source is
selected from the Device List, it will take priority and
switch from the existing displayed source.
To remove the source from the Workstation screen,
you can use the shortcut key stroke given by the
administrator for ‘disconnect’. Press the shortcut key
stroke to bring the device back to an unconnected
state. Alternatively, you can open the Device List again
and press Dfor Disconnect with the Device List open.
2
Arqa Workstation Quick Start Guide
STEP 4 - SHARING CONTENT
Push
To open the SHARE RX (PUSH) menu, again use the
congured shortcut key strokes created by the system
administrator.
The push function enables the user to share selected
content to the wall or another user’s workstation
screen, depending on the congured user access rights
within Aetria Command Center.
Use the up/down cursor keys on the keyboard to select
the required source and press enter and the source
will be shared to the wall.
If the receiver name displays a (W) in front this means
that this receiver is a Datapath video wall controller
destination, and requires the appropriate video capture
window to be open on the wall controller as part of a
wall layout.
As part of the video wall layout conguration within
Aetria, the wall supervisor or admin should ensure that
any capture windows from Arqa devices include an on
screen display (OSD) overlay on the wall which shows
the name of the connected Arqa receiver as seen in
the operators‘push’ list, such that an operator can easily
tally the devices in their share list with the location that
the content is going to appear on the wall.
Get
To open the SHARE TX (GET) menu, use the
congured shortcut key strokes created by the
system administrator. The get function enables the
user to retrieve selected content and display it on the
workstation.
Log Out
To log out of the Arqa Workstation open the Device
List, use the congured device list shortcut key strokes
created by the system administrator and press U on
the keyboard.
Datapath Ltd declares that this product complies with the essential requirements and
other relevant provisions of Directives 2014/30/EU, 2014/35/EU and 2011/65/EU.
A copy of our Declaration of conformity is available on request.
Datapath Limited
Bemrose House
Bemrose Park
Wayzgoose Drive
Derby, DE21 6XQ
UK
A full list of product compliance certications can be found in the product User Guide
on the Documentation Media supplied with the system.
CERTIFICATION
EU – Class A Declaration of Conformity
3
Arqa Workstation Quick Start Guide
Datapath UK and
Corporate Headquarters
Bemrose House, Bemrose Park,
Wayzgoose Drive, Derby,
DE21 6XQ, United Kingdom
+44 (0) 1332 294 441
Datapath North America
2490 General Armistead Ave,
Suite 102, Norristown,
PA 19403, USA
+1 484 679 1553
www.datapath.co.uk
QSG-KVM-EN1-V1.0
Autres manuels Datapath Ordinateur de bureau
